Spec Sheet

switch from either the MAN or AUTO position to the OFF position. If the unit is equipped with an On/

Off switch move the switch to the OFF position.

Stopping Gasoline Engine (If so equipped) -

If so equipped, your air compressor is powered by a gasoline engine. Most accidents with engines

can be prevented if you follow all instructions in this manual, the engine owner’s manual and on the

engine. Follow the instructions in the owners manual for the proper stopping procedure.

A. Turn the engine switch to the OFF position

B. Close the fuel shutoff valve.

2.) If machine is electric powered, disconnect the machine from the electrical service.

3.) Inspect for and tighten any loose nuts and/or bolts.

4.) Check all accessories for damage and loose mountings. Replace or repair any damaged

accessories.

4.) Inspect the controls, instruments, and gauges for damage or loose mountings. Replace or

repair any damaged controls, instruments, or gauges.

7.) Inspect all hoses for kinks and loose connections. Replace or repair any damaged hoses.

8.) Inspect electrical wiring for cuts, fraying, and loose connections. Replace or repair any

damaged electrical wire(s).

9.) Inspect all tubing and piping for loose connections or damage. Replace or repair any

damaged tubing or piping.

10.) Drain Condensate from tanks(s). Follow the procedure for Draining Air Receiver

condensate.

11.) If the unit is portable, relocate compressor to suitable storage location.