MP5000 Owner’s Manual PUSH ON/OFF VOL LOUD A AUD AUX C B + JENSEN MUTE SPEAKER MEDIA PRO 5000 ON/OFF UP ALARM TUN/ TRK CD-RW T/F DN 1 AM/FM 2 3 INT RPT RDM DVD/CD/MP3 PLAYER STOP AS/PS 6 5 4 ENTER DVD 3 MP SET LANG AUX A/V IN MENU
Thank You! Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen receiver for maximum enjoyment. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MP5000 Installation Select Mounting Location Select a mounting location, taking care to avoid the following: • • • • Places exposed to heat-radiating appliances such as electric heaters Adjacent to other equipment that radiates heat Poorly-ventilated or dusty places Moist or humid locations Preparing the Opening Use the mounting hole diagram (below) to measure and cut a mounting hole, and mount the unit using the four 3x20min self-tapping screws provided.
Wiring The wiring diagram depicts all the wiring connections required for proper operation of the unit.
MP5000 Basic Operation 1. Power / Volume Control Press the power button (1) to turn the unit on or off. This button also serves as the volume control knob; rotate clockwise or counterclockwise to increase or decrease the volume output. 2. Mute / Loudness Press MUTE (2) momentarily to silence the audio output in tuner, CD, DVD or auxiliary input mode. Press MUTE again to resume the previous volume level.
4. Audio Adjustment Press AUD (4) momentarily to step through the following audio adjustment options: Volume, Bass, Treble, Balance (left to right) and Fader (front to back). When the desired option appears in the display, rotate the volume control knob (1) to adjust that audio feature. When no adjustments have been made for three seconds, the unit will resume normal operation. 5.
MP5000 Tuner Operation 10. Select a Band Press AM/FM (10) momentarily to directly access tuner mode from any other function mode. When the unit is already in tuner mode, briefly press AM/FM to change between two AM bands (AM1 and AM2) and three FM bands (FM1, FM2 and FM3). 11. Tuning Manual Tuning Briefly press TUN/TRK UP or DN (11) to tune the frequency one step higher or lower. Seek Tuning Press and hold TUN/TRK UP or DN to automatically tune up or down to the next strong station.
12. Preset Stations Store Preset Stations Six numbered preset buttons (12) store and recall stations for each AM and FM band. To store a station, select a band (if needed), then select a station. Hold a preset button for three seconds. The current station will be stored, and the corresponding preset number will appear in the display. Recall Preset Stations To recall a station, select a band (if needed). Press a preset button momentarily, and the unit will tune to the corresponding stored station. 13.
MP5000 JENSEN SPEAKER ON/OFF 3 MP SET CD-RW 1 2 3 ENTER INT RPT RDM DVD/CD/MP3 PLAYER 9 6 5 4 STOP MENU LANG AUX
17. Intro Scan (INT) Press and hold INT(17) for more than three seconds during disc play to play the first 10 seconds of each track on the current disc. Press INT again to end the scan and play the selected track. 18. Repeat (RPT) Press and hold RPT (18) for more than three seconds during disc play to continuously repeat the selected track. Press and hold RPT again to stop repeating. 19.
MP5000 DVD Operation (continued) The included remote control operations many functions of the unit, including DVD functions.
39. Numeric Buttons To directly access a track, press the corresponding numeric button (1-9) (39). To access a track with a number of 10 or greater, press 10+, then the other numbers. For example, to access track 12, press 10+, then 1, then 2. 40. Directional Arrows While in the DVD menu, press any of the four directional arrows (40) to move the cursor to the desired menu item. Press ENTER (either on the radio or the remote) to confirm the highlighted selection. 41.
MP5000 DVD Operation (continued) DVD Setup Press SETUP on the remote control to access setup mode, which allows setup of the following four DVD functions: • • • • System Setup Language Setup Audio Setup Video Setup While in the setup menus, use your directional arrows to select and change settings. The “up” and “down” arrows highlight the options, and the “right” and “left” arrows will change the setting for the highlighted option.
Language Setup The language setup menu controls the following features: LANGUAGE SETUP OSD LANGUAGE ENGLISH AUDIO LANG GERMAN SUBTITLE LANG SPANISH MENU LANG FRENCH PORTUGUESE EXIT SETUP ITALIAN On-Screen Display Language: Set the on-screen display language ON. Audio Language: Set the audio language to one of the following: English, German, Spanish, French, Portuguese or Italian.
MP5000 DVD Operation (continued) Video Setup The video setup menu controls the following features: VIDEO SETUP BRIGHTNESS 12 CONTRAST 10 HUE 8 SATURATION 6 SHARPNESS 4 2 EXIT SETUP 0 Brightness: Adjust the brightness of the screen from the following levels: 12, 10, 8, 6, 4, 2 or 0. Contrast: Adjust the contrast of the screen from the following levels: 6, 4, 2, 0, -2, -4 or -6. Hue: Adjust the hue of the screen from the following levels: 6, 4, 2, 0, -2,- 4 or - 6.
Specifications General Power Supply Requirements . . . . . . . . . . . . . . . . . . . . . . . . . DC 12 Volts, Negative Ground Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-16VDC Overall Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265mm(W)x178mm(H)x159mm(D) Mounting Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 235mm(W)x154mm(H)x133mm(D) Weight. . . . . . . . . . . . . . . . . . . . . . . .
