Technical Specifications
SPECIFICATION SHEET
Architect
Engineer
Contractor
Submitted by Date
Location
Project
REMARKS QTY. REFERENCE
Styleline
MEDICINE CABINET
FEATURES/TYPICAL SPECIFICATIONS
• Surface Mount Installation
• Pre-drilled mounting holes spacing: y = 12.375” center-to-
center and x = 8.875” center-to-center
• Formed and welded steel housing (WB/ST)
• 22 gauge steel with white, heat cured, acrylic paint finish
• Framed Mirror door
• 2MM thick float glass mirror door front
• Polished stainless steel frame (SS8)
• 30 gauge steel door back with white, heat cured, acrylic
paint finish
• 16” piano hinge with 90º stop welded to the door and
mechanically fastened to the cabinet body (HG01) (1 typical)
• Reversible for left-hand or right-hand door swing
• 3/16” thick glass shelves, adjustable (ADJ) (3 typical)
• Magnetic door catch in the cabinet body aligns to a stainless steel
striker plate on the door back (1 typical)
• Mounting hardware and a 26 gauge galvanized steel toothbrush
holder with white, heat cured, enamel paint finish are included
• Standard Pallet Quantity of 42 units
Meets Federal Specification #WW-P-541/8B
S472FS_B
Finishes:
Housing: PT01— Basic White
Mirror: Flat Mirror
Frame: SS8—Polished Stainless Steel
Dimensions In Inches
Model # Description A B C D E F
472FS MEDCAB 1DR 16X22 SS8 WB/ST 16⅛ 22⅛ 5-1/16 15⅝ 21⅝ 4-5/16
* All models and material specifications are subject to change or withdrawal without notice.
Rangaire Manufacturing Company, LP * 501 S. Wilhite Street, Cleburne, TX 76031
(1-800-325-8351) * www.rangairemfg.com