Instructions / Assembly

ManualsBrandsJENSEN ManualsBathMetro Deluxe Oversize 20 in. x 25 in. x 5 in. Frameless Recessed or Surface-Mount Bathroom Medicine Cabinet

MODEL: 52WH254DP, 52WH254DPF,

52WH304P, 52WH304PF,

52WH304DP, 52WH304DPF

RECESSED MOUNTED,

STEEL MEDICINE CABINETS

INSTALLATION of CABINET

1. Carefully remove all packing material. Place

hardware packages, shelves and door aside until

needed. Hardware and shelves are located in the

 llers identi ed by “Hardware enclosed” tape.

2. Determine desired location of cabinet on wall.

Mark wall to show wall opening size (see

dimension chart). Generally, the recommended

height to the center of the cabinet is 64” from the

 oor. (Fig. 1)

3. CAUTION: Wall studs, plumbing or electrical lines

that interfere must be removed or relocated. Cut

wall opening, being careful not to damage the

surrounding wall surface. Insert framing to

support all plaster board edges.

4. Prepare the mounting screws by placing the

screws into the clear plastic bases. (Fig. 2)

5. Note: For ease of installation, an additional person is

recommended. Insert cabinet into wall opening.

(Fig.3) Ensure the cabinet is plumb and level. If

necessary use a carpenter’s level and shim corners of

cabinet. Secure to wall studs through the four (4)

mounting holes inside cabinet, using the screws that

have been placed into the plastic bases. (Fig. 4) Do

not over tighten the mounting screws as the body

side wall may bend and prevent proper shelf

installation. Only tighten screws until they are

 ush with the body.

6. Snap the screw covers over the screw bases.

(Fig.5)

For help, call us

toll free!

1-800-637-1453

Fig. 3

Wall

Opening

Cabinet

Body

Fig. 4

Mounting

Screws

Mounting

screw into

mounting

hole

Fig. 1

Fig. 2

nsert screw

hrough clear

lastic base

Fig. 5

Snap on Cover

Cover

Base

Screw

INSTALLATION INSTRUCTIONS

MODEL WALL OPENING OVERALL SIZE

NO. W H D W H D

52WH254DP 19

24 4 20 25 5

52WH254DPF 19

24 4 20 25 5

52WH304P 23

29 4 24 30 5

52WH304PF 23

29 4 24 30 5

52WH304DP 23

29 4 24 30 5

52WH304DPF 23

29 4 24 30 5

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS MODEL: 52WH254DP, 52WH254DPF, 52WH304P, 52WH304PF, 52WH304DP, 52WH304DPF RECESSED MOUNTED, STEEL MEDICINE CABINETS MODEL NO. 52WH254DP 52WH254DPF 52WH304P 52WH304PF 52WH304DP 52WH304DPF For help, call us toll free! 1-800-637-1453 INSTALLATION of CABINET 1. Carefully remove all packing material. Place hardware packages, shelves and door aside until needed. Hardware and shelves are located in the fillers identified by “Hardware enclosed” tape. 2.
PAGE 2
INSTALLATION of DOORS Fig. 6 1. Remove hinges and screws from hardware bag. Mount hinge unit on door as shown in Fig. 6 and Fig. 7 securing with screws provided. 2. Install the door by inserting door side of the hinge into the bracket on the body as shown; A) 125 degree hinge Insert door side of clip hinge as shown in Fig. 8 B) 170 degree hinge Insert door side of clip hinge as shown in Fig. 9 3. Check door for proper alignment.
PAGE 3
INSTALLATION of SHELVES, HOLE PLUGS AND BUMPERS 1. 2. 3. 4. 5. Fig. 13 Fig. 14 Select where you want the shelves to be placed. Insert two (2) shelf brackets at each end of the shelf location. (Fig. 13) Set shelves in place on the shelf brackets, pressing down on shelf to lock in place. (Fig. 13) Remove hole plugs from hardware bag and place in remaining holes. ( Fig. 14) Remove bumpers from hardware bag and position to body. (Refer to Service Parts Drawing - Key No. 9 for bumper locations).
PAGE 4
10 3 4 6 5 2 5 3 2 1 9 7 8 SERVICE PARTS KEY NO. 1 2 3 4 5 6 7 8 9 10 DESCRIPTION Door Assembly Hinge Assm w/screws Screw, hinge (4 req.
PAGE 5
INSTRUCCIONES DE INSTALACION MODELO: 52WH254DP, 52WH254DPF 52WH304P, 52WH304PF, 52WH304DP, 52WH304DPF AHUECADO GABINETS MONTADO, DE ACERO DE LA MEDICINA NUMERO DE MODELO 52WH254DP 52WH254DPF 52WH304P 52WH304PF 52WH304DP 52WH304DPF Para la ayuda, llamenos peaje libres! 1-800-637-1453 ABERTURA DE LA PARED ANCH ALT PROF 489 610 102 489 610 102 591 737 102 591 737 102 591 737 102 591 737 102 TOMANO TOTAL ANCH ALT PROF 508 635 127 508 635 127 610 762 127 610 762 127 610 762 127 610 762 127 INSTALACION del
PAGE 6
INSTALACION de PUERTAS Fig. 6 Bisagra de 125 grados montada a la puerta 1. Quite las bisagras y los tronillos de bolsos del hardware. Monte la unidad de la bisagra en puerta segun lo demostrado adentro Fig. 6 y Fig. 7 que asegura con los tornillos proporcionados. 2. Instale la puerta insertando el lado de la puerta del hiinge en el soporte en el cuerpo segun lo demostrado; A) Lado de la puerta del relleno de la bisagra de 125 grados de la bisagra del clip segun lo demstrado adentro Fig.
PAGE 7
INSTALACION de ESTANTES, de ENCHUFES del AGUJERO Y de TOPES 1. 2. 3. 4. 5. Fig. 13 Fig. 14 Seleccione donde usted quisiera que los estantes fueran colocados. Soportes del estante en cada final de la localizacion del estante. (Fig. 13) Estatnes determinados en lugar en los soportes del estante y empujan hacia abajo a la cerradura en lugar. (Fig. 13) Quitan los enchufes del agujero de bolso del hardware y los colocan en agujeros restantes. (Fig.
PAGE 8
10 3 4 6 5 2 5 3 2 1 9 7 8 PIEZAS DE SERVICIO Numero Dominante 1 2 3 4 5 6 7 8 9 10 Descripcion Asamblea De la Puerta Montaje de bisagra con los tornillos Tornillo, bisagra Enchufe DelAgujero Cubierta y base del tornillo Tornillo de montaje #8 x 11/2* Estante Ayuda Estante, cristal Topes Cubierta De la Bisagra Numero De Pieza 52WH304P 52WH304PF 52WH254DP 52WH254DPF 52WH304DP 52WH304DPF A97016500 A97016501 A97016455 A97016456 A97016457 A97016458 A97016214 A99160423 A99111239 A97016214 A9