User's Manual

AUX IN OPERATION

This unit provides an AUX IN JACK (#14) for connecting external audio devices like MP3 players, CD players, smart

phones and iPods (except iPod shuffle 3rd generation) to listen to your external source through the speakers of this

system.

1. You need an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.

2. Plug one end of the cable into the AUX IN JACK (#14) located on the front of the unit and the other end of the

cable into the Line-out Jack or Headphone Jack of your external audio device.

3. Turn on the external audio device.

4. Rotate the FUNCTION SELECTOR (#13) to select the AUX mode.

5. Rotate the POWER / VOLUME CONTROL (#12) to turn on the unit.

The POWER/FUNCTION INDICATOR (#10) will turn on purple.

6. The volume level can now be controlled using the

POWER / VOLUME CONTROL (#12) on the JTA-315.

7. Operate all other functions on the auxiliary device as usual.

Notes:

 If you connected the Line-out Jack on your external device then you only need to adjust the volume control of

this system. If you connected the Headphone Jack of your external device then you may need to adjust both the

volume control of your external device and the volume control of this system to find the most desirable volume

setting.

 Rotate the POWER / VOLUME CONTROL (#12) counter-clockwise until you hear a “click” sound to turn OFF the

UNIT when you finish listening. Don't forget to switch off the power on your external device as well.

HEADPHONE OPERATION

Plug your headphones (not included) into the HEADPHONE JACK (#11) on the front of the unit for private listening.

After plugging in the headphones, the speakers will be automatically disconnected.

WARNING : ALWAYS LOWER THE VOLUME LEVEL BEFORE PUTTING ON YOUR

HEADPHONES. OTHERWISE YOUR HEARING COULD BE DAMAGED.