MVB85A 8.
Important Notice An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.
FEATURES Congratulations on your purchase of the JENSEN MVB85A drop-down Video Monitor with DVD Player. The MVB85A has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment.
CONTROLS AND INDICATORS DIAGRAM MAIN FUNCTION DESCRIPTION 1. Dome Lights – Provide additional interior illumination. 6 2. Infrared Transmitter and Sensor – Used to transmit audio to wireless headphones. Also allows the remote control to operate the unit and to control other accessories in the system. COMPACT VIDEO DIGITAL AUDIO 1 2 1 3. Source Button – Source select DVD, AV1, AUX. 7 8 9 10 3 4 5 ON 4. Screen Mode Button (=) – Allows the user to change screen format ( Aspect Ratio 4:3 or 16:9 ).
MAIN FUNCTION DESCRIPTION REMOTE CONTROL OPERATION 13. LCD Panel – Display the video source and the On Screen Displays (OSD). 14. Auxiliary Video/Audio Input – Audio and Video Source input. 15. Headphone Jacks – Allows the use of wired headphones with a 1/8” plug for listening to video program audio. LIFT HERE BATTERY COVER Battery Installation Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down.
REMOTE CONTROL OPERATION 17 POWER 1 MAIN FUNCTION DESCRIPTION * Function control is available on the unit and the Remote Control. 18 1. POWER* Press this button to turn “ON” and “OFF” the MVB85A unit. EJECT FMM ON/OFF CHANNEL SELECT 1 2 3 4 5 6 7 8 19 2. DISPLAY Press to display current disc information while the disc is playing. Press cursor (pqtu) buttons to select from: Title 00:00:14 DVD Chapter Title -/Chapter 1/1 Angle 1/1 Angle Ch ENG 5.
MAIN FUNCTION DESCRIPTION 5. AUDIO Press to display and select Audio language in DVD mode. Each time you press the button, the language changes. Note: The available languages vary from disc to disc. 6. ZOOM Press this button to enlarge the picture when playing a DVD disc.
11. VOLUME DOWN (-) Press to decrease the volume level of the wired headphone jacks. It is also used to make picture adjustments in the picture select mode. 12. VOLUME UP (+) Press to increase the volume level of the wired headphone jacks. It is also used to make picture adjustments in the picture select mode. Note: The volume buttons will not affect the volume of wireless headphones or the FM modulator.
14. PIX ( Picture Select ) Each time this button is pressed, the on screen picture adjustment displays the “adjustment bar” for BRIGHTNESS, CONTRAST, COLOR or TINT. Once the desired adjustment bar is displayed, use the VOLUME+/ VOLUME– button to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds, or is any other button is pressed. 15. PAUSE (II) Press to pause playback. 16. STOP (<)* Press to stop playback. 17.
23. ENTER Press to implement selected settings. 24. SETUP Press to display the Setup Menu which allows the user to change the DVD player options such as TV DISPLAY, OSD LANGUAGE, EQ TYPE, PARENTAL CONTROL etc. Refer to the settings and adjustments section for more information. 25. REPEAT Allow the user to repeat the playback in various options. Press repeatedly to change the options. 24. NEXT (:) Press to skip to the next chapter or track. 25. PREVIOUS (9) Press to return to the previous chapter or track.
SETTINGS AND ADJUSTMENTS The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the onscreen display, limit playback for children. Using the Setup Menu 1. Press the SETUP button on the remote. The Setup Menu appears on the screen as shown in the diagram. Language Language Setup Video Rating Language Setup OSD Menu Video Setup Rating Setup Video Rating English English French Spanish Italian German 2.
LANGUAGE SETUP Language for On-Screen Display OSD MENU: The OSD MENU setup allows you to select the language for the on-screen display. The user can either select from English, French, Spanish, Italian or German for the OSD language. Language OSD Menu Video Rating English English French Spanish Italian German Video Rating VIDEO SETUP TV Display The TV DISPLAY setup allows you to adjust the video output aspect ratio.
RATING SETUP Password After you have selected the password change option use the numeric buttons to enter in the defaul password (3308), then press Enter. Unlocking the password will allow access to the rating option To close the password lock enter the default password or enter a new password Then press Enter to apply the changes. Language Password Rating Load Factory Video Rating **** Adult Reset Rating This allows you to limit movie playback from G to Adult.
Playing DVDs 1. Press the DISPLAY Button on the remote control to display the status banner. 2. Selecting a chapter. You can skip to a specific chapter by using the numbers keys. For example, if you want to skip to chapter 2, press “02”. 3. Using the Repeat Feature The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: • REPEAT CHAPTER – Repeat the chapter that is playing. • REPEAT TITLE – Repeat the title that is playing.
Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on your DVD player. The DVD player plays the songs in the order they were burned on to the disc. Press the DISPLAY button on the remote to display the elapsed or remaining time. • Time elapsed is the time that the song has played.
Remote Sensor Eye/ Infrared Transmitter ON Power ON/OFF Switch OFF AUTO S POWER SOURCE STOP SCREEN EJECT Dome Light Switch PLAY Turning the MVB85A ON or OFF 1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 2.
Overhead Dome Lights The Dome Lights integrated into the MVB85A are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights ON. The OFF position will prevent the lights from turning ON with the vehicle’s interior lighting, and the auto position will allow the lights to turn ON and OFF with the vehicle’s interior lighting. Refer to the installation Guide for wire connections.
SOURCE FEATURE AV1 The video input may be connected to a Video Cassette Player (VCP), video game system, or other audio/video devices. To access the A/V inputs, turn the MVB85A on, press the source button on the MVB85A or the Source button on the remote control until “AV1” is displayed on the screen. Turn the video source component on with its power button or remote control. The MVB85A is now ready to play the audio and video signals from the source connected to AV1 input.
DVD Basics To get the optimum use out of the DVD section, make sure you read this section completely. Regional Coding Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don’t match, the disc won’t play. This unit’s code is region 1. Other regional codes cannot be played in this unit. The unit will display “WRONG REGION”. Types of Discs the MVB85A will play • DVD disc - DVD discs which contain video.
TROUBLESHOOTING SOLUTION PROBLEM IR sensor inoperative — Verify that the batteries in the remote are fresh. — Verify that the remote sensor eye is not obstructed. Disc won't play — Insert a disc with the label side facing up. — Check the type of disc loaded. This DVD player DVDs, audio CDs and MP3s. — Both the unit and the disc are coded by region. If the regional codes don’t match, the disc can’t be played. This DVD player is set to Region Number 1.
SOLUTION PROBLEM The icon ( x ) appears on screen — The feature or action cannot be completed at this time because: 1. The disc’s software restricts it. 2. The disc’s software doesn’t support the feature (e.g., angles) 3. The feature is not available at the moment. 4. You’ve requested a title or chapter number that is out of range. Picture is distorted — The disc might be damaged. Try another disc. — It is normal for some distortion to appear during forward or reverse scan.
REPLACEMENT PARTS SPECIFICATIONS Remote Control 136-4057 LCD Backlighting Edge Light Tube A/V Adapter Cable 112B3227 Resolution 1440 × 234 Pixels 336, 960 Operation Temperature 32-140°F (0-60°C) Storage Temperature -4-176°F (-20-80°C) Backlight life 10,000 Hours Video Display System NTSC/PAL Headphone Audio Output 0.03W@32 ohms Video Output 1.0Vp-p@75 ohms Power Source 12V DC Dimensions HXWXD 1.8 X 10.2 X 8.
® 12 MONTH LIMITED WARRANTY Applies to Jensen Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
© 2005 Audiovox Electronics Corp.
