CMR2720 7” TOUCH SCREEN MECHLESS RECEIVER AM-FM, Bluetooth INSTALLATION & OWNER’S MANUAL
CMR2720 INFORMATION FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: &KDQJHV RU PRGL¿FDWLRQV WR WKLV XQLW QRW H[SUHVVO\ DSSURYHG E\ WKH SDUW\ responsible for compliance could void the user’s authority to operate the equipment.
CMR2720 INFORMATION Safety Notice Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your JENSEN CAR2720 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only. To prevent damage or injury: • Make sure to ground the unit securely to the vehicle chassis ground. • Do not remove the top or bottom covers of the unit.
CMR2720 INSTALLATION Preparation Please read and understand entire manual before installation. &RQVXOW D TXDOL¿HG WHFKQLFLDQ IRU GHWDLOHG LQVWUXFWLRQV RU installation assistance. Before You Start • Disconnect negative battery terminal. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be VXEMHFW WR GXVW GLUW RU H[FHVVLYH YLEUDWLRQ Getting Started • Unpack unit from its protective packaging.
CMR2720 INSTALLATION GRAY/RED SWC INPUT Input / Output Wiring Diagram Tips When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses (1) 10 amp ATC blade-type fuse located on the back of the unit. Front / Rear camera inputs Up to two cameras (not included) can be used. We recommend JENSEN Part # BUCAM200J for front camera and BUCAM300AJ or BUCAM400AJ for rear camera.
CMR2720 OPERATION Main Control Locations 1 Microphone 6 microSD Card Slot 2 0RGH 9RLFH $VVLVWDQW 7 Reset 3 7XQH 7UDFN 8S 8 $X[LOLDU\ ,QSXW 4 9ROXPH 3RZHU 0XWH 9 USB Slot 5 7XQH 7UDFN 'RZQ 6
CMR2720 OPERATION Source Menu Operation 2 1 3 9 8 7 6 5 4 Radio 1 Press to access Radio. Bluetooth Phone 2 Press to access Bluetooth phone. Settings 3 Press to display and adjust system settings. Camera 4 Press to display the rear and front cameras. AV Input 5 Press to access AV input. 6 3UHVV WR DFFHVV DX[LOLDU\ LQSXW BT Music 7 Press to access the Bluetooth music. microSD 8 3UHVV WR DFFHVV ¿OHV RQ PLFUR6' FDUG USB 9 3UHVV WR DFFHVV ¿OHV RQ 86% GHYLFH $X[LOLDU\ ,QSXW
CMR2720 OPERATION On Screen Controls 1 8 2 3 4 5 Screen Brightness 1 Press up to two times to dim the screen. Press a third time to put the unit in standby mode (screen will go black). Press anywhere on the screen to return to normal screen operation. Voice Assistant 2 Press to activate the voice assistant feature. Audio 3 Press to access and adjust audio settings.
CMR2720 OPERATION Audio Settings Select any of the preset EQ settings (Flat, Classic, Rock, Pop, Jazz, Beat or User) or use the touch screen to manually adjust EQ settings. Select any of the preset Surround settings: Concert, Church, Passive, Wide, Live or None. Adjust balance (8L to 8R) and fader (8F to 8R), or use the touch screen to manually adjust balance and fader settings.
CMR2720 OPERATION Settings Menu From the Main Menu, press the gear icon to access the Setup menu and adjust the following: General, Audio, Display and Bluetooth. General: • OSD Language - Select English. • Wallpaper - Select from three different wallpaper options. • Radio Area - Select Europe, USA, South America or Asia. • Time Setting - Set the date (month, day, year) and time (hours, PLQXWHV $0 30 DQG KRXU RU KRXU FORFN . • Beep - Enable or disable the audible beep.
CMR2720 OPERATION Tuner Operation 1 2 3 9 4 5 6 Radio Operation 7 8 Select the Radio icon from the Main Menu screen. Main Menu 1 Press to return to Main Menu screen. Mode Indicator 2 Displays the current mode of operation. Tune Down 3 Press to tune to a lower frequency one step at a time. Press and hold to automatically tune to the last strong station. Preset Stations 4 Press any preset station stored in the current band to tune radio to saved frequency.
CMR2720 OPERATION USB/microSD Operation 2 1 9 3 8 4 5 86% PLFUR6' 2SHUDWLRQ 12 6 7 7R SOD\ 03 ¿OHV IURP D 86% GHYLFH RU PLFUR6' FDUG insert a USB device or microSD card, and playback will begin automatically. To return to USB or microSD playback from another mode of operation, select the corresponding icon from the Main Menu. Main Menu 1 Press to return to Main Menu screen. Mode Indicator 2 Displays the current mode of operation. File Information 3 'LVSOD\V LQIRUPDWLRQ DERXW WKH FXUUHQ
CMR2720 OPERATION Media Compatibility File Type File System File ([WHQVLRQ FAT X )$7 )$7 9 PS 03 0S P3 MPEG Format Sampling Frequency 9 UPS P D X MPEG 1 9 MPEG 2 9 MPEG 2.5 9 MPEG 1 N+] MPEG 2 N+] MPEG 2.5 N+] MPEG 1 32 ~ 320kbps MPEG 2 8 ~ 160kbps MPEG 2.
CMR2720 OPERATION Bluetooth Operation 1 2 3 4 5 6 7 Preparation Before using a Bluetooth device, it must be paired and connected. Make sure that Bluetooth is activated on your device before you begin the pairing process. Pairing a New Device The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details. The device name is “JENSEN CMM2720”.
CMR2720 OPERATION Bluetooth Operation 8 9 10 11 12 13 Paired Device List 8 Press to display a list of paired devices, and select desired device to connect. Talk 9 Press to connect a call to the number entered. End Call 10 Press to end a call. Previous Track 11 Press to go back to the previous track. 3OD\ 3DXVH 12 Press to pause the current track, then press again to resume playback.
CMR2720 OPERATION App Operation The Jensen Smart app is the ultimate wireless remote control for your receiver. You can download the Jensen Smart app from the Apple App Store or Google Play Store and install it on your smartphone or tablet. Scan the following QR code to download the Jensen J-Link P1 application on your smartphone. Navigation Hot Button Once the Jensen Smart app is installed, press the Navi hot button to connect your receiver to your phone through the on-screen UI.
CMR2720 OPERATION Rear Camera Connect an optional rear camera to the Rear Camera inputs (Yellow RCA connector for video and Black RCA connector for audio). Refer to the wiring diagram for details. Manual selection - Touch the REAR CAMERA icon from the Main Menu or from any operational mode (when enabled) to select camera mode.
CMR2720 OPERATION Steering Wheel Controls A third-party adapter must be used in order for the CMM7720 to be compatible with any OEM steering wheel controls. The CMM7720 has a built-in 3.5mm SWC interface that compatible with many popular 3rd party SWC control modules, such as PAC, METRA, and others. 3.5mm SWC port located on the rear of the unit, on the 0$,1 32:(5 , 2 +DUQHVV Replace with ATO Type fuse Only POWER M The following controls are available for most vehicles.
CMR2720 OPERATION Limited One Year Warranty 7KLV ZDUUDQW\ JLYHV \RX VSHFL¿F OHJDO ULJKWV
CMR2720 OPTIONS Troubleshooting General PROBLEM Unit will not turn on (no power) Unit has power (but no sound) Unit blows fuse(s) Unit has audio (but no video) CAUSE ACTION 5HG DQG RU
CMR2720 WARRANTY 6SHFL¿FDWLRQV FM Tuner US Tuning Range: EU Tuning Range: Usable Sensitivity: 50dB Quieting Sensitivity: Stereo Separation@ 1kHz: Frequency Response: 87.5MHz-107.9MHz 87.50MHz-108.00MHz 8.5dBf 10dBf 30dB 30Hz-13kHz AM Tuner Tuning Range: Usable Sensitivity: Frequency Response: 530kHz-1710kHz <42dBu 30Hz-2.2kHz Bluetooth Version: 3UR¿OHV Range: 4.
CMR2720 INSTALLATION & OWNER’S MANUAL Customer Support 1-888-921-4088 (Monday-Friday, 9AM-5PM EST) 9LVLW KWWSV ZZZ MHQVHQPRELOH FRP Designed and Engineered in USA All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of NAMSUNG AMERICA INC. Namsung America Inc. ©2020 Namsung America Inc. All rights reserved.
CMR2720 QUICK START GUIDE Media Receiver with Bluetooth featuring a 7" Touch Screen Display This Quick Start Guide gives you the basics to start using your CMR2720. Please visit www.jensenmobile.com to download a complete owner's manual or call customer service at 1-888-921-4088 (Monday-Friday, 9AM-5PM EST).
Installation ~ ~ ..,e;~ ~~ ~ 0~ i ~~~ 0 @@!} TRIM PLATE TYPICAL FRONT-LOAD DIN MOUNTING METHOD Copyright and Trademark Notes The 8/uetooth"' word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. The microSD logo is trademark of SD-3C LLC. Siri and Apple are registered trademarks owned by Apple Inc. Google Assistant and Android are trademarks owned by Google LLC. Other trademarks and trade names are those of their respective owners.
I~5· i lea I t:J 1..,.
Control Locations G)- @ - - l1t @- - I... @ -------, ~ ®-- r·· ®--(j) SOURCES ~~ I. 1 0 A f~ H;1•1·_i--'r,_·,_ n ® ®- 1. MIC 2. Short Press- Mode change Long Press- Voice Trigger 3. Tune/Track Up 4. Volume/Power/Mute 5. Tune/Track Down 6. miroSD card slot 7. Reset 8. AUX 9. USB port Main Menu ~ In the Menu mode, press the desired icon to enter the corresponding mode: Radio,BT Phone,USB,microSD Card.BT Audio,Aux In, AV ln,Camera,Settings.
USB I microSD Card Operations Insert USB device in the USB slot, and the unit will read the USB device. microSD operation will work the same way when you insert the microSD card into unit's microSD card slot. 1. Previous Menu 8. Audio Setting 2. Repeat 9. Voice Activation 3. Random 10. Play/Pause 11. Screen Dimmer 12. Track Down 4. Setup Menu 5. File List 1 2 3 6. Navi hot button 7.
B/uetooth Operation Bluetooth Microphone The microphone is built-in to the receiver. Pairing and Connecting Before using Bluetooth functions, you must pair your mobile phone to the receiver. The device name is "JENSEN CMR2720 ". To ensure the best reception for pairing and re-connection, please make sure the mobile phone battery is fully charged before you begin. • Try to perform pairing within a few minutes of the mobile phone being turned on.
APP Operation The Jensen Smart App is the ultimate wireless remote control for your CMR2720 receiver. You can download the Jensen Smart app from the Apple App Store or Google Play Store and install it on your smartphone or tablet. Please scan the following QR code to download Jensen J-Link P1 App to your smart phone. One-Year Limited Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Namsung America Inc.
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
