Instruction Manual

CQL1430-B Bluetooth Wireless Speaker
Instruction Manual (Read before proceeding)
Power:
Works on internal rechargeable battery. Please charge your speaker fully before first use.
To charge the battery :
Using a Micro USB cable (included), insert the jack into ”Charging” jack located on the back of the unit and
then plug the USB connecter into the USB port on a computer for charging.
A red light will indicate the charging situation. When battery is full, the red light will turn off automatically.
Bluetooth Speaker Operation
Turn on the unit by pushing the switch on the back to position. A Blue light will start blinking to indicate
the speaker is in paring mode and searching for your Bluetooth mobile device.
Open the Bluetooth function on your device and search the speaker named “SMPS-560”. After selecting
this speaker, your device will pair without a password. (If required, enter the password “0000” to finalize the
paring).The Blue light will begin to flashing slowly after pair is complete.
Start playing music on your device. Keep your device within 33feet (10meter) of your speaker.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in used.
Universal Speaker Operation
For other music devices without Bluetooth, turn on the unit by pushing the switch to “Aux” position, use the
included audio input cable, insert the USB jacks into the “AUX-IN” jack and into the earphone jack on your
device.
Turn on the unit and start playing music.
Turn off the unit when not in used.
Color Light Operation
Turn on the color light by pushing the switch to “ON” position
Translucent cabinet changes in 7 colors gradually every 5 seconds.
Turn off the color light by pushing the switch to “OFF” position
Caution:
This is not a toy. Please keep away from small children.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Do not over charge the battery.
Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.

Summary of content (2 pages)