HELLO KITTY 1GB DIGITAL AUDIO PLAYER OWNER’S MANUAL KT2045 PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE
SAFETY INFORMATION Equipment tested for compliance as a complete unit. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
BEFORE YOU BEGIN After purchasing and downloading music to your PC, you are now ready to move content to your player. To transfer the music, you must use Windows Media Player or the application recommended by the online music download service. (Note: Services and applications must be Windows Media audio-compliant and support Digital Rights Management.) Computer System Requirements • Pentium III 500MHz or higher recommended • Macintosh iMac G3 or higher • Windows Me, 2000, or XP • Mac OS X Version 10.1.
Caution While Driving Use of headphones while operating an automobile or moving vehicle is not recommended and is unlawful in some states and areas. Be careful and attentive on the road. Stop operation of the unit if you find it disruptive or distracting while driving. Important Battery Information • When storing the unit, be sure to remove the battery because it may leak and damage the unit.
Note: - Once connected, your computer will assign a new drive letter “X”(X-Any alphabet that allocated by your computer) and be called “Removable Disk”. Simply drag and drop music files from your music folder to this new folder. - Secure music download files must be transferred to your player through Windows Media Player or the application recommended by the online music download service.
7. The frame will display the synchronized songs. Removing the unit from the computer Note: Please follow these steps to avoid damaging the player or losing data. 1. Double-click on the “Safely Remove Hardware” icon (green arrow) in the system tray of your Windows desktop (see diagrams below for illustration). 2. Click stop in the “Remove Hardware Device” dialog window. 3. You will be asked which device you want to stop. Choose the player and click OK to continue.
4. The “Safely Remove Hardware” window will appear to confirm that it safe to remove the player. Click OK to continue. 5. Now you can safely disconnect the player from the computer. CONTROL LOCATIONS 1. POWER ON/OFF/PLAY/PAUSE/STOP BUTTON 2. REC/A-B BUTTON 3. MENU / BUTTON 4. HOLD SWITCH 5. VOLUME – BUTTON 6. VOLUME + BUTTON 7. HEADPHONES JACK 8.
OPERATION Press the PLAY button to turn the unit ON. Press and hold the PLAY button to turn the unit OFF. Warning: Do not turn the unit OFF when it is playing music. Otherwise any unsaved data will be lost. Select Menu 1. Press the PLAY button to turn the unit ON and enter the music standby mode. 2. Press and hold the MENU button to enter the main menu. 3. Press the PREVIOUS MM or NEXT NN buttons to select the desired menu: Play Music, Voice, Record, Delete, Settings and About (memory status). 4.
Settings 1. Press the MENU button for two seconds to enter the main menu. 2. Press the PREVIOUS MM or NEXT NN buttons to select the “Setting’’ icon. Then press the MENU button to confirm and enter the submenu. Equalizer Press the PREVIOUS MM or NEXT NN buttons to select the equalizer mode: and choose from Normal, Rock, Jazz, DDB, POP or Classic. Press the MENU button to confirm your selection.
A-B repeat (Only available in music play back menu or voice menu) To repeat a sequence between two points A and B, press the rec/ a-b button at the beginning of the sequence that you want to repeat. Then press the rec/ a-b button again at the end of sequence. The sequence is then played repeatedly until you press the rec/ a-b button to resume normal playback. Hold Slide the HOLD switch to the arrowhead direction to lock the player. The lock icon will appear on the display.
TECHNICAL SPECIFICATION Bit rate: 8~320Kbps Contrast of LCD: 0-10 Signal-to-noise ratio: >80(1kHz) USB port: USB2.0 full speed ID3 Tag display with Lyrics, blue backlight Memory size: 1GB MP3 / WMA (DRM9) Operation conditions: humidity <85%, 14°F ~ 104°F Battery life: About 8 hrs SERVICE Please refer to the instructions on the enclosed warranty card for returning your unit for service. When returning the unit, please remove batteries to prevent damage to the unit in transit and/or from possible leakage.
