DIGITAL CAMERA OWNER’S MANUAL KT7015A 1
Contents Contents………………………………………………………………………………….…………….2 Preface………………………………………………………………………………………………….4 System Requirements…………………………………………….………………………………….5 Notices………………………………………………………………………………………………….6 Install Driver…………………………..……………………………………………………………….8 Start to Use…………………………………………………………………………………………10 Install Battery……………………………………………………………………………………………………10 Charge Battery………………..………………………………………………………………………………10 Use SD Card……………………………………………..………………………………………………………10 Switch on/off………………………………………………………….
Indicator Light……………………………………………………………………………….……………………15 Computer Connection…………………………………………………………………………...………………15 Power-saving Mode………………………………………………………………………………………………15 Menu Settings……………………………………………………………………………………………………..16 Capture……………………………………………………………………………………………………………..16 Recording………………………………………………………………………………………………………….16 Playback……………………………………………………………………………………………………………16 Direct Printing……………………………………………………………………………………………………..17 Step Operation.....................................................
Preface Thank you for your purchase of our digital camera! Before using it, please read carefully this user manual. This camera can take digital pictures of 8,000,000 pixels and short videos (no audio). With the playback function, you can play back the pictures and videos you have taken. Connecting the camera with the printer supporting PictBridge protocol, you can directly print the pictures in 6" out.
System Requirements During operation and use, please refer to the lowest computer system requirements for the digital camera. We strongly recommend you use better computer to operate the digital camera in order to obtain the best performance. The lowest system requirements are as follows: System Requirements Operating System Microsoft Windows 98 SE,Me,2000,XP and VISTA CPU CPU Intel Pentium166MHz above or equivalent. MAC OSX 10.4.
Notices General: 1. Do not open the camera housing, in which some parts can cause electric shock. 2. Dampening, pressing, crash and high heat can cause damage to the product. Memory and Saving: 1. The SD/MMC card can be used (supports up to 2GB). The SD/MMC card is not included and can be purchased at a local retailer. 2. When purchasing an SD/MMC card, please bring your digital camera with you in order to ensure the compatibility. 3.
Maintenance and Care: After use, store the digital camera in a dry, dark place and take out the battery if the camera is not going to be used for an extended period of time. 1. Use proper protective casing to avoid scratching camera lens and screen. 2. If you want to clean the surface of the camera lens, please blow away dust on it and then lightly mop up the lens with dust cloth and paper towel suitable for cleaning optical equipment. Never use organic solvent to clean the camera. 3.
Install Driver 1. Switch on the computer and insert driving CD. 2. The system will automatically run the installation program in the CD and the following window will be shown on the screen: (If your CD-ROM has no the function of automatic running or automatic running is closed, please directly click the program autorun.exe under the CD root directory) 1. Click “Install Driver” button and complete installation according to the hints. Then restart the computer. 2.
Notes: ● Install the driver before the camera is connected to the computer. ● No matter which edition of WINDOWS you use, it is only required to install driver when using the PC Camera function. ● It is not required to install the driver when using the removable disk function except for WINDOWS 98SE ● Before connecting the computer, see the section titled Computer Connection. ● Driver supports such operating systems as WINDOWS 98SE/ME/2000/XP/VISTA.
Start to Use Install Battery 1. Open Battery Lid. 2. Install the battery as per the tip drawing on the front of the lithium battery (see drawing at right) so as to ensure proper installation. 3. Replace the battery lid. 4. Remove the battery if you do not plan to use the camera for a long period of time. period. period of time. Charge Battery 1. Power off the camera. 2. Connect the camera to the computer USB port with USB cable to charge the battery. 3.
Body Appearance 11
Functions of Keys Keys Power key Shutter key Mode key MENU key OK key UP key DOWN key LEFT key RIGHT key Capture/Video Mode Functions Switch on/off Press once to start capturing. Press this key 2nd time to stop/save recording during Video mode. Switch for Capture, Video and Playback mode.
Standard Accessories In the package, you can see the following accessories: Basic Operation Choose Modes: There are 3 modes such as Capture, Video and Playback. You will enter the Capture mode after switch-on and you can press the mode key to switch between these three modes. Use Direction Keys: Press the direction keys upward, downward, leftward and rightward to carry out the functions of the Up, Down, Left and Right keys. In addition, the Down key can carry out the functions of OK key.
Menu Settings: Press MENU key to open menu; press Up/Down key to select menu options; press Right key to enter submenu; press OK key to confirm; press LEFT key back to the previous menu. Menu is divided into 2 categories: mode menu and setup menu (as the right Fig.). Press MENU key to open mode menu. When selecting menu title, press Left key or Right key to switch between mode menu and setup menu. Capture: After power-on, the Capture mode will be entered.
When a picture is now displayed, the Up key or Down key can be used to enlarge or reduce pictures. When a video is now displayed, press the OK key to start playing, press OK key to pause playing; during pause, press the Left key or Right key to choose normal play or backward play and OK key to confirm and start playing. Direct Printing: In the playback mode, choose the picture to be printed, press MENU key to open the menu and choose “Print”.
Icons displayed on the screen Instructions Under Capture mode Under continuous Capture mode 3624×2448 resolution 2592×1944 resolution 2048×1536 resolution 1600×1200 resolution 640×480 resolution AWB Auto white balance Day Light white balance Tungsten white balance Fluorescent white balance Cloudy white balance Flash off Auto flash Forced flash Image quality: Super 18
Image quality: Fine Image quality: Normal Memory card used Card write protected. Date stamp start 0 Pictures taken 17 Pictures able to be taken EV+0.0 Exposure compensation value Sufficient battery Moderate battery. Low battery. Battery to be used up. 10s delay self-timer Capture 20s delay self-timer Capture 3.0 Digital zooming ◆Use digital zoom Before Capture or video recording, using digital zoom can enlarge the menu by max. 4 multiples. To zoom in, please press the Up key.
◆Menu options Video menu: Image Menu Submenu 3624×2448 2592×1944 2048×1536 1600×1200 640×480 Super Fine Normal Auto Daylight Tungsten Fluorescent Cloudy Color Sepia Monochrome +0.
Disable 10SEC 20SEC Single Burst Self-timer Burst Snapshot ◆Menu operation Enter Exposure Compensation submenu, press the Left key and the Right key to adjust; after adjustment, press OK key to confirm. Setup menu: Setup menu Submenu English Français Deutsch Italiano Espaňol Portuguese 中文 Disable 60Sec. 120Sec.
Enable Disable 50Hz 60Hz 2007 / 08 / 30 20 : 08 Enable Disable Yes No Load No Theme Light Frequency Date/time Buzzer Format Default Settings Version number: Upgrade Firmware Version ◆Menu operation Press MENU key to open video menu. At the time, press LEFT key or RIGTH key to switch between video menu and setup menu. Press DOWN key to enter the items of video menu or setup menu. Press UP key and DOWN key to choose menu items and the background of the menu item selected will become green.
After setting, press MENU key to close menu. Clock Settings: select “Clock Settings”. Press RIGHT key to enter clock setting submenu. Press UP/DOWN key to make adjustments and press RIGHT key to select adjusted items (Hour/Minute, Day/Month/Year). After adjustments, press OK key to confirm. Video Mode In the Video mode, only press the Shutter key to start recording. During recording, icon #1 below will be displayed on the left top of the screen. Press the shutter key again to stop recording.
Icons displayed on the screen Instructions In the Video mode, idle state 640×480 resolution 320×240 resolution AWB Auto white balance Day Light white balance Tungsten white balance Fluorescent white balance Cloudy white balance Memory card used. Card write-protected. Sufficient battery Moderate battery. Low battery. Battery to be used up. 3.
◆Use digital zoom Before or in the process of video recording, with digital zoom function, you can enlarge the picture by 4 times. Press the Up direction key to zoom in and Down direction key to zoom out. In the video recording, digital zoom will not display enlargement multiples.
Icons displayed on the screen AVI Instructions Video playback Pictures playback Under auto play. Pause auto play 5 6 00:00:05 Location of current file Total files Video play time Sufficient battery. Moderate battery.
Low battery. Battery to be used up. File locked Memory card used. Card write-protected. Under play Pause normal playing. Under playing backward Pause backward playing Play process ◆Video play Press Left key or Right key to choose video files, press Shutter key to start playing and press OK key during play to pause playing. Press OK key again to continue playing. Press the Left direction key or the Right direction key to play forward or backward and press OK key to confirm and start playing.
the file. Enter thumbnail mode: In playback mode, press the Down direction to enter thumbnail mode, or press Menu key to open the menu and choose Thumbnail, press the Right direction key to enter the thumbnail mode. Press Up/Down/Left/Right key to choose file; the chosen file will have a red frame around. Press OK key to exit the thumbnail mode and display the file in full screen.
90° 180° 270° Yes No Yes No Rotate Slideshow Print Setup menu: The same as Capture mode. ◆Menu operation Main operations are the same as those of capture mode menu. “Set Logo”, “Rotate” and “Print” are only valid to pictures. Set Logo: using the option can set current photo as switch-on image. To cancel the set switch-on image, choose one image in playback mode and then press MENU key to open the playback menu, choose “Set Logo” submenu, choose “No”, then press OK key to confirm.
Computer Connection Before connecting with the computer, please install the driver (refer to the instructions in the Installation part).
▲Fig. Ⅰ ▲Fig. Ⅱ ◄Fig.
►Fig. Ⅳ After use, click button to exit. Note: If images cannot be displayed, check if the camera installs the driver and confirm whether the device chosen in the window is: . About the use of VideoImpression 2, please refer to “VideoImpression 2 Installation and Use”.
Software Installation and Use Introduction interface for software installation: 1. Put the installation CD among the accessories into the CD diver of the computer. 2. Then the system will carry out the installation program on the CD and the screen will display the following introduction window: z If the CD driver does not automatically carry out or close such function, please click autorun.exe program under the root directory of the CD.
Run PhotoImpression5: Double click the icon Programs”. on the desktop, or open PhotoImpression 5 via “Start→ When PhotoImpression5 is opened, the following window will appear. Click the center of the widow with the left key of the mouse to shut the window. After the window is off, you can open PhotoImpression.
After choosing and opening photos in the “Get Photo”, the chosen photo will be displayed in the central area of the program. And then you can edit the chosen photo.
For the detailed instructions of PhotoImpression, please refer to Help in the program (as the following figure).
VideoImpression 2 Installation and Use: Install VideoImpression 2: Click “Install VideoImpression” button and complete the installation as per the tips. After installation, please restart the computer. Run VideoImpression 2: Double click the VideoImpression 2.
For the detailed instructions of VideoImpression 2, please refer to Help in the program (as the following figure).
Specifications Image Sensor Function Mode Lens Focusing Range Digital Focusing Shutter LCD Screen Photo Resolutions Video Resolutions White Balance Exposure Self-Timer File Format Storage Media USB Port Power Supply 5 Mega pixels Snap, video record, picture/video playback, Mass Storage and PC Camera. F3.2 f=7.58mm 120cm ~ unlimited 4× Electronic 2.
Q&A After the battery is installed, The battery power is not enough, please charge it. the The battery is installed inversely. Please confirm the proper camera cannot be switched on. installation. The internal memory or SD/MMC is full. Please transfer or Pressing the Shutter key delete some files so as to release space. cannot snap and record The SD card in the camera is write-protected. Please take videos. out the SD card and pull the write-protected switch to release protection.
Rays in the environment are not sufficient. Please take Dark pictures or videos pictures in the place with enough rays or use lamps to promote the rays, or use strobe light in dark environment. The battery power is not enough, please charge it. Camera automatic switch-off When automatic switch-off is set as 60s or 120s, the camera will automatically switch off without any operation within 1min or 2min according to setting. Files are write-protected. Please cancel the protection first.
Compliance with FCC Regulations This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Service Please refer to the instructions on the enclosed warranty card for returning your unit for service. When returning the unit, please remove batteries to prevent damage to the unit in transit and/or from possible battery leakage. We are not responsible for batteries returned with the product or for the cost of replacement. Distributed by: Spectra Merchandising International, Inc. 4230 North Normandy Avenue Chicago, IL 60634, U.S.A.