Use and Care Manual

E-14
3.)
If
you
are
pairing
(linking)
your
computer
to
the
unit
using
Bluetooth,
you
may
need
to
set
the
speaker
as
your
computer
’
s
default
sound
device.
CONNECTING YOUR BLUETOOTH DEVICE USING NFC
ABOUT NFC
NFC (Near Field Communication) is a technology enabling short-range wireless communication
between various devices, such as mobile phones and IC tags Thanks to the NFC function, data
communication can be achieved easily just by touching the relevant symbol or designated location
on NFC compatible devices.
1. Make sure your Smartphone or Bluetooth device has the NFC feature, and it is turned ON
(enabled).
2. Turn on the JBS-200 power, press the MODE Button on main unit or remote control to enter
Bluetooth mode, the Bluetooth icon turns ON and Bluetooth “bt” message will be shown in
display and flashing.
Note : If the JBS-200 is connected to other smartphone, press and hold the PAIR Button on
remote control or main unit for 3 seconds to enter Bluetooth paring mode, “bt” message
will flash in display.
3. Touch the back of your smartphone to the NFC linking point icon located on the center
of the front panel of unit (above LCD display). Check the owner’s manual of your Bluetooth
device to locate the NFC touch point if you are not sure where it is.
4. If the JBS-200 is in pairing mode, it will turn on and enter Bluetooth mode automatically and
pair with your smartphone. Display will change show “BT” steadily and some smartphones
may ask you to confirm the pairing if they are not paired before.
NOTE: If you have multiple NFC compatible devices to link, just touch the smartphone to a
different device to switch the connection to that device. For example, when your smartphone is
connected to the JBS-200, just touch the linked smartphone to the system to disconnect it and
then touch another smartphone you want to change the Bluetooth connection to (one touch
connection switching). The connection will automatically be transferred from your smartphone to
the new device.
NOTE ON CONNECTING
Some
3
rd
party
batteries
and/or
add-on
wireless
charging
coils
may
interfere
with
using
the
NFC
feature
on
this
unit.
If
you
followed
the
directions
above
for
connecting,
but
find
that
you
are
still
having
problems
connecting
using
NFC,
we
recommend
checking
to
be
sure
your
Bluetooth
device
is
only
using
factory
authorized
parts
and
batteries.
AUXILIARY INPUT OPERATION
This
unit
features
an
auxiliary
audio
signal
input
jack
for
connecting
external
audio
devices
like
MP3
players,
Digital
Audio
Device
and
listen
to
them
through
the
speakers
of
this
unit.
1.
Use
an
audio
cable
(not
included)
with
one
3.5
mm
stereo
plug
on
each
end
of
the
cable.
2.
Plug
one
end
into
the
AUX
IN
JACK
on
main
unit
and
the
other
end
of
the
cable
into
the
Line-
out
Jack
or
Headphone
Jack
of
your
external
audio
device.
3.
Turn
on
the
unit
and
external
audio
device.
4.
Tap
the
MODE
Button
on
main
or
remote
control
to
select
AUX
mode,
“
AUX
”
icon
turns
on,
display
shows
“
A
U
H
”
message.
5.
The
volume
level
can
now
be
controlled
through
the
main
unit.
Operate
all
other
functions
on
the
auxiliary
device
as
usual.
Note:

If
you
connect
this
unit
to
the
Line-Out
Jack
of
your
external
device
then
you
only
need
to
adjust
the
volume
control
of
this
unit.
If
you
connect
the
Headphone
Jack
of
your
external
device
then
you
may
need
to
adjust
both
the
volume
controls
of
your
external
device
and
this
unit
to
obtain
the
desirable
volume
setting.
 Press the Button on main unit or remote control to turn off the unit when you have finished
listening. Don't forget to switch off the power of your external device as well.