AM/FM Stereo Dual Alarm Clock Radio With Top Loading CD Player USER MANUAL JCR-310 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
DEAR JENSEN® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
WARNINGS WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICING TO QUALIFIED SERVICE PERSONNEL.
6) 7) Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The appliance should be situated so that its location or position does not interfere with its proper ventilation.
SAVE THESE INSTRUCTIONS IMPORTANT NOTE Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. • Places subject to constant vibration. • Dusty, humid or moist places. • Sources of electrical noise such as fluorescent lamps or motors. • In case of malfunction due to electrostatic discharge, the apparatus has to be reset by disconnecting it from mains supply and removing all the batteries.
ON AC VOLTAGE • Before use, check that the rated voltage of your unit matches your local voltage. ON CONDENSATION • When left in a heated room where it is warm and damp, water droplets or condensation may form inside the CD player. • When there is condensation inside the unit, the unit may not function normally. • Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up and dry the unit before use.
LOCATION OF CONTROLS 1. 2. 3. 4. CD Door Power On/Standby ; FUNCTION button DISPLAY button TIME SET/MEMORY/MEM+ button 14. 15. 16. 17. 5. 6. 7. ALARM 2/VOLUME- button ALARM 1/VOLUME+ button SNOOZE /SLEEP button 18. 19. 20. 8. 9. 10. 11. 12. 13. CD PROGRAM button CD REPEAT button Tune/Skip/Search Backward button Tune/Skip/Search Forward button CD STOP button CD PLAY/PAUSE button 21. 22. 23. 24. 25. 26.
POWER SOURCE This unit operates using standard 120V~ 60Hz AC household power and 2 “AA” size (UM-3) batteries (Not included) for alarm clock backup. A. AC POWER CONNECTION 1. Plug the AC power cord into a standard 120V~ 60Hz AC wall outlet. 2. Tap the Power On/Standby button to turn on the unit. 3. Tap the FUNCTION button to change the operation mode. 4. Press and hold the Power On/Standby button to turn the unit into “STANDBY” mode after you finish listening. B.
2. If you select Wake to music, please set the volume level of music/radio with the power ON before putting the unit into Standby mode. The volume you set will be the same volume level that you come on when the alarm time is reached. Note: 1.) For Wake to music from CD, please make sure a CD is inserted and can be properly played, otherwise the unit will default to the “Beeping” alarm sound automatically.
To stop the music alarm immediately, tap the Power button. SNOOZE FUNCTION When the alarm sounds, it can be temporarily stopped by pressing the SNOOZE button. The alarm sound will be suspended but the relative alarm indicator will keep flashing. The alarm will turn off for 9 minutes and then come again. This manual snooze operation can be repeated again and again during alarm sounding period. LISTENING TO RADIO Radio Tuning 1. Tap the / FUNCTION button repeatedly to select AM or FM radio mode. 2.
Recalling a Preset Station 1. Tap the / FUNCTION button to turn on the unit. 2. Tap the / FUNCTION button to select AM or FM radio receiving mode. 3. To select desired preset channel, tap the MEM+ button repeatedly. CD OPERATION This CD player not only plays commercial CDs, but also self-compiled CD-R/RW discs. Do not attempt to play any of the following formats: CD-ROM, CDI, VCD, DVD or computer CDs.
3. In clock display mode, tap the DISPLAY button to show the current track number on the display. The current track number will revert back to show the time after 30 seconds. 4. To stop the CD playback, press the STOP button once. SKIP and SEARCH MODE 1. In play or pause mode, press the Tune/Skip/Search Forward button once to skip forward to the next track or repeatedly to skip multiple tracks.
SLEEP TIMER FUNCTION The sleep timer allows you to turn the unit off after a designated time is reached. 1. To activate the sleep timer, turn the unit on and either load a CD, tune to the desired radio station or listening to music via AUX IN. 2. Tap the SLEEP button and the sleep time appears on the display. 3. Repeatedly tap the SLEEP button to select a sleep time. The unit will turn off after 10, 20, 30, 40, 50, 60, 70, 80 or 90 minutes.
CARE AND MAINTENANCE 1. 2. 3. 4. Avoid operating your unit under direct sunlight or in hot, humid or dusty places. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors. If drop-outs or interruptions occur in the music during CD play, or if the CD fails to play at all, its bottom surface may require cleaning. Before playing, wipe the disc from the center outwards with a good soft cleaning cloth.
CD disc does not play Audio disc while playing skips Unit not in CD function mode. Audio disc is installed incorrectly. It the disc is self-compiled, the media used may not be compatible with the player. Disc is dirty or scratched. Dirty or defective disc Intermittent sound from the player Unit gets warm after extended play at high volume Dirty pick up lens Player is subject to excessive shock or vibration This is normal. Select CD mode. Insert audio disc with label side up.
90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $20.00 to cover the cost of repair, handling and return postage. All out of warranty returns must be sent prepaid. It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email at custserv@spectraintl.com for updated information on the unit requiring service. In some cases the model you have may be discontinued, and SPECTRA reserves the right to offer alternative options for repair or replacement.
