Operation Manual

JHD910BT

BLUETOOTH OPERATION

The JHD910BT includes built-in Bluetooth technology that allows you to connect this head unit to

wireless headphones and certain other Bluetooth devices.

About Bluetooth Technology

Bluetooth is a short-range wireless radio connectivity technology developed as a cable

replacement for various electronic devices. Bluetooth operates in 2.4 GHz frequency range and

transmits voice and data at speeds up to 1 megabit per second. Bluetooth was launched by a

special interest group (SIG) comprised of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and

IBM in 1998, and it is currently developed by nearly 2,000 companies worldwide. The Bluetooth

word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks is under

license. Other trademarks and trade names are those of their respective owners.

Pairing a Bluetooth Device

Before you begin, consult the owner’s manual for the Bluetooth device you want to pair with the

JHD910BT. Make sure the device is on and ready to receive a signal from the JHD910BT.

1. Press and hold the AUDIO/MENU button (12) for more than three seconds to enter menu

adjustment mode.

2. Press the AUDIO/MENU button repeatedly until the “BT PAIR” option is displayed.

3. Press the VOL+ button (10) to begin searching for BT devices.

4. The unit will display a list of devices found. If more than one device is found, an arrow

appears, indicating more choices. Press VOL+ or VOL- to navigate to the correct device.

5. Press the AUDIO/MENU button (12) to choose a device. “PAIRING” appears on the display,

indicating that the pairing process has begun.