Operation Manual

JHD910BT
6
Auxiliary Input Function
To connect a portable audio device (MP3 player, iPOD, etc.) to the JHD910BT, connect the
headphone or line level output of the device to the 1/8" auxiliary input jack of the JHD910BT (14)
using the audio patch cord (included). Press AUX (6) to select auxiliary input mode.
Timer
Press the TIMER button (8) to directly access timer mode. Press TIMER to start the timer
function. The “TIMER” icon will flash in the display. Press TIMER again to stop the timer. The
“TIMER” icon will remain in the display (without flashing). Press the button again to resume the
timer, or press and hold it for three seconds to reset it to zero and remove the “Timer” icon from
the display.
Volume
Press VOL+ (10) or VOL- (13) to adjust the volume up or down one step. Press and hold VOL+ or
VOL- for more than one second to continuously adjust the volume level until the button is
released. The current volume level (0 to 40) will appear in the display when the volume is
adjusted, returning to the default display three seconds after the adjustment is complete.
Setting the Clock
To set the clock to display the current time, press DISP (3) for more than three seconds to enter
clock setting mode. The time will flash in the display. Press TUN- (9) to adjust the hours or TUN+
(11) to adjust the minutes. When no adjustment is made for ten seconds, the time will be set and
normal operation will resume.
Audio Adjustment
Press AUDIO/MENU (12) to step through the following audio adjustment options: Bass, Treble
and Balance (left to right). When the desired option appears in the display, press VOL+ (10) or
VOL- (13) to adjust that audio feature. When no adjustments have been made for three seconds,
the unit will resume normal operation.
Menu Adjustment
Press AUDIO/MENU for more than three seconds to enter menu adjustment mode and adjust
any of the menu options: When the desired option appears in the display, press VOL+ or VOL- to
adjust that menu option. When no adjustments have been made for three seconds, the unit will
resume normal operation. The following menu options may be adjusted using this feature:
• Beep Confirm (On or Off
) - Determines if a beep will be heard each time a button is pressed.
• Operation Region (USA
or Euro) - Selects the appropriate operating region.
• Clock Display (12
or 24) - Selects a 12-hour or 24-hour clock display.
• Display Brightness (Low, Mid or High
) - Determines brightness level of the display.
• Backlight Color (Amber
or Green) - Determines the backlight color of the unit.
• P-VOL [Power on Volume] (On or Off
) - Determines if preset Turn On Volume will be set.
• Turn On Volume (0-40) - Selects desired volume level for the unit to assume when turned
on.
• WB Alert (On or Off
) - Determines if the weather band alert feature is activated.
• BT ON - Enables Bluetooth connectivity.
• BT PAIR - Connects Bluetooth device (see “Bluetooth Operation” on page 9 for detailed
instructions).
• BT LIST - Show list of paired Bluetooth devices.
• Default - Select to return to factory default settings.