® Docking Digital Clock Radio For iPod and iPhone USER MANUAL JiMS-70i (iPod/iPhone Not Included) PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
DEAR JENSEN® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
IMPORTANT NOTES Avoid installing the unit in locations described below: Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. Places subject to constant vibration. Dusty, humid or moist places. COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules.
PRODUCT FEATURES The JiMS-70i is an iPod/iPhone Docking Music System that incorporates the following features: Play and Charge your iPod nano, iPod touch, iPod classic, iPod video and iPhone. FM digital tuner with 20 presets Auxiliary input jack Digital volume control Sleep timer function Time synchronization Dual Alarm clock function - Wake to radio/alarm or your iPod/iPhone Snooze function LOCATION OF CONTROLS TOP VIEW REAR VIEW 1. FM Antenna 2. DC Input Jack 3.
8. Snooze/Sleep/Dimmer Button 9. iPod/iPhone SKIP Forward ; Radio TUNE+ Button; Clock Adjust Forward; Memory Up 10. Volume Up (+) / Alarm1 Set Button 11. Volume Down (-) / Alarm2 Set Button 12. iPod/iPhone SKIP Backward Memory Down 13. AUX-IN Jack ; Radio TUNE- Button; Clock Adjust Backward; CLOCK DISPLAY UNIT AL1: Icon lights when Alarm 1 is on. AL2: Icon lights when Alarm 2 is on. PM: PM time indicator GETTING STARTED This JiMS-70i is designed to operate using the included AC Adaptor. 2 x 1.
BATTERY CARE i. If the unit is not used for an extended period of time, remove the battery. An old or leaking battery can cause damage to the unit and may void the warranty. ii. Do not dispose batteries in fire. Batteries may leak or explode. iii. Do not try to recharge batteries that are not intended to be recharged; they can overheat, rupture and leak (Follow battery manufacturer’s directions). iv. (a) Do not mix old and new batteries.
NOTE: When you first dock your iPod/iPhone, the unit will run an authentication process, so it may not respond immediately to the SYNC button when pressed. Wait for few seconds and try pressing the SYNC Button again An iPod /iPhone can only sync time up to the nearest minute; it’s possible to have up to 59 seconds difference between the clock radio and synced iPod/iPhone. The iPod internal clock is automatically updated when sync’d with iTunes.
example, if it stops on 100.9 MHz instead of 100.8 MHz, use the manual tuning method to "fine tune" to the exact frequency of the desired station. If a station is broadcasting in Stereo, the unit will automatically receive the stereo broadcast. Hints for the Best Reception To obtain the best FM Stereo reception, unwrap and fully extend the FM Antenna and adjust the position of the wire for best station reception.
during playback for fast forward searching within the song. 5.) Press the Button to go to the starting point of current song or previous song. Press and hold the button during playback for fast backward search within the song. 6.) Press the VOLUME + / ALARM 1 or VOLUME - / ALARM 2 buttons to adjust the volume output level. 7.) Playback will be suspended if there is an incoming call. The iPhone will ring. 8.) Touch the Answer icon once to pick up the call. 9.
Note: “b” stands for Wake to Alarm, “I” stands for Wake to iPod/iPhone, and “F” stands for Wake to Radio. i. Wake to Alarm (b) - Repeatedly press the or buttons until the ALARM Indicator, “b”, appears and blinks on the display. - Press the VOLUME + / ALARM 1 or VOLUME - / ALARM 2 buttons again to enter he VOLUME setting mode. The volume digit will blink on the Display.
Note: i. ii. The relevant Alarm Indicator will blink when the alarm time is reached. If you have chosen the “Wake to RADIO” alarm mode, make sure that you have tuned to a station and adjusted the volume to a comfortable level. iii. After waking to beeping, iPod/iPhone or Radio alarm, the volume level of the iPod or radio cannot be adjusted.
Note: (1) If you connected the Line Out Jack of your external device then you only need to adjust the volume control on JiMS-70i. If you connected the Headphone Jack of your external device then you may need to adjust both the volume control of your external device and the volume control of this system to find the most desirable volume setting. (2) Press the POWER/FUNCTION button to turn off JiMS-70i when you finish listening. Don't forget to switch off the power of your external device as well.
The unit does not respond (no power). iPod/iPhone does not respond to the speaker system. AC Adaptor is not plugged into a wall outlet or the connector is not plugged into the power supply jack on the back of the unit. Wall outlet is not functioning. Plug the AC adaptor into a wall outlet and plug the connector into the supply jack on the unit. Plug another device into the same outlet to confirm the outlet is working.
Frequency FM: 88 – 108 MHz “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod and iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone , or iPad may affect wireless performance.
any part thereof, except batteries, when it is returned to the SPECTRA Service Department, accompanied by proof of the date of original consumer purchase, such as a duplicate copy of a sales receipt. You must pay all shipping charges required to ship the product to SPECTRA for warranty service. If the product is repaired or replaced under warranty, the return charges will be at SPECTRA’s expense. There are no other express warranties other than those stated herein.
