JMC-670 WALL MOUNTABLE FRONT LOADING DUAL MP3 CD SYSTEM WITH DIGITAL TUNER AND REMOTE CONTROL INSTRUCTION MANUAL Please read and follow this instruction manual carefully before using the unit and retain it for future reference HX-1056M3 IB JENS 001 REV0.
FCC INFORMATION WARNING TOPREVENTFIREORSHOCKHAZARD,DONOTUSETHISPLUGWITHANEXTENSIONCORD,RECEPTACLE OROTHEROUTLETUNLESSTHEBLADESCANBEFULLYINSERTEDTOPREVENTBLADEEXPOSURE.TO PREVENTFIRE OR SHOCK HAZARD, DO NOT EXPOSE THISAPPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFETYINSTRUCTIONS 1. 2. 3. 4. 5. 6. Read these instructions. Keep these instructions Heed all warnings.
POWER SOURCE TABLE OF CONTENT WELCOME ................................................................................................................................................ 5 INDEX TO PARTS AND CONTROLS ..................................................................................................... 5 MAIN UNIT ..................................................................................................................................... 5 REMOTE CONTROL .................................
JMC-670 INSTRUCTION MANUAL JMC-670 INSTRUCTION MANUAL REMOTE CONTROL WELCOME Thank you for purchasing the JENSEN Wall Mountable Front Loading Dual MP3 CD system. Before operating the unit, please read this manual thoroughly and retain it for future reference. INDEX TO PARTS AND CONTROLS MAIN UNIT 1). CD DOOR 2). CD DOOR OPEN / CLOSE BUTTON 3). FUNCTIONBUTTON 4). CD 1/2 FUNCTION BUTTON 5). ID3 BUTTON 6). FOLDER + / MEMO UP BUTTON 7). PROGRAM / MEMORY BUTTON 8). STOP/BAND BUTTON ( H1.
JMC-670 INSTRUCTION MANUAL INSTALLATION JMC-670 INSTRUCTION MANUAL G E TTING S TAR TE D FOR TAB L E TOP US E S PE AK E R CONNE CTION Following the diagrams below, insert the stands into the base and attach the main unit and speakers as shown. 1. Insert the speaker cables by pushing down the terminal lever of the Left S peaker Terminal and the R ight Speaker Terminal (25). 2. C onnect the speaker to S peaker Terminals (25), with red wire to red terminals and black wire to black terminals .
JMC-670 INSTRUCTION MANUAL JMC-670 INSTRUCTION MANUAL Note: If no CD is inserted in the chosen CD location, “NO DISC” appears. 7.The CD indicator (#D9) appears with either “ ” or “ ”, indicating the current CD location. 8.Press Button (9/H5) to start playing. CLOCK SETTING Note: The clock has to be set the first time you use the unit. TO: Stop play TO SET THE CURRENT TIME For example to set the clock at 7:30 AM 1. In STANDBY Mode, press MEMORY Button (7/H6) once. Hour digit flashes to prompt for input.
JMC-670 INSTRUCTION MANUAL 2. Select the desired track by pressing the / JMC-670 INSTRUCTION MANUAL Button (11/H7) to select the track you want to program. 3. Press the MEMORY Button (7/H6) again to enter the selected track in program memory #1. The program advances to. number 4.Repeat steps 2 & 3 to program addiitonal tracks, 20 tracks can be memorized. Button to start playing the tracks in your programmed order. 5.Press PLAY/PAUSE 6.
JMC-670 INSTRUCTION MANUAL Note: When listening to an FM station, fully extend the antenna to insure maximum reception. Automatic tuning relies on the signal strength of the broadcasting station. Weaker stations are often skipped when using automatic tuning. Manual tuning is suggested for locating and programming weaker stations and also for fine tuning stations found during automatic scan. For FM stereo reception, the unit provides FM MONO/STEREO selection.
JMC-670 INSTRUCTION MANUAL JMC-670 INSTRUCTION MANUAL RESETING THE UNIT CARE AND MAINTENANCE 1.Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used. 2.Avoid leaving your unit in direct sunlight or in hot, humid or dusty places. 3.Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors. 4.