Users Manual

CARE AND MAINTENANCE

RECORD CARE AND MAINTENANCE

To ensure the best sound and the least amount of wear on your records, it’s essential that they are kept clean. Make

sure your records, especially older ones are sufficiently cleaned prior to playing them.

Thoroughly clean dust off the stylus and record regularly.

• Use a soft brush to clean the stylus. Brush from the base to the tip as shown below.

• For records with only light amounts of dust, we recommend brushing them off with a carbon fiber brush or velvet

pad before playing them. Use a good quality record cleaner and brush set to keep your records clean. Carbon fiber

brushes, velvet pads and record cleaning kits are available online or in local record stores.

• Using a mild dish soap and warm water for washing your records will also help remove excess dirt and dust that

builds up over the years. Use a microfiber cloth when washing and wiping off any excess water from the record

once they have been cleaned

NOTE:Remember, the best cleaning in the world just removes all the dust and dirt. Some records will have scratches

and groove wear. No amount of cleaning will fix this. So after cleaning, some records may sound “perfect” and others

may not.

SPECIFICATIONS

AC/DC Adaptor Input: AC 100-240V ~, 50/60Hz, 0.8A

Output: DC 12V 2A

Speaker Impedance 4 ohm, 10W

Design and specification are subject to change without notice.