Manualshelf

Use and Care Manual

ManualsBrandsJENSEN ManualsElectricalDigital 3-Speed Stereo Turntable with MP3 Encoding and AM/FM Receiver
11121314151617181920
EN-11
PROGRAMMED PLAY
Programmed play can only be achieved in Stop mode.
1. In stop mode, briefly press the PROG button (7) on the unit. Program Channel
No. ‘P1’ will briefly appear. ‘P’ will then disappear leaving the Program
Indicator,‘PROG’ and ‘1’ flash in the Display to prompt for input.
2. Press the or Buttons (4, 5) to select your desired track to be stored in
the program. For example the first selection is track no.5.
3. Press the PROG button (7) to confirmed when track No.5 flashed in the Display.
The first program selection is now stored in the program memory.
The Program Channel No. ‘P 2’ will appear briefly. ‘P’ will disappear and 2 will
revert to 5, i.e. the first selected program and flash together with ‘PROG’ to
prompt for another input.
4. Repeat points 2 and 3 to enter the desired tracks up to max 32 selections.
5. Press the button (1) once to start playback in your programmed sequence.
6. To clear the program memory, while playing press the Stop button (3) 2 times or
select TUNER, PHONO function or turn the System off.
COPYING FILES BETWEEN USB AND CARD
The files stored on your USB flash drive or on the SD/MMC card can be copied to each
other. Please follow the instructions below to copy the files between the USB port and
the Card slot.
The following tasks can be accomplished by either using the controls on the REMOTE
Control or those which have similar function markings on the JTA-460 main unit.
This icon indicates that a task can only be performed using the controls on JTA-460.
1.
Insert your USB flash drive into the USB PORT (22) and the SD/MMC Memory Card
into the SD/MMC Slot (20).
2.
Select the USB / CARD function mode by setting the Function selector (12) to
“USB/CARD”.
.
The total number of tracks on the USB will be displayed and
playback will automatically start from the first track.
3.
Press the STOP/USB/SD Button (3) once to stop the playback. Copy of the USB
files to the Card is now ready to proceed any time. If you want to copy the files from
the Card to the USB, you need to enter the Card playback Stop mode first then
proceed to Step 4 below for copying.
USB Playback Stop Mode Card Playback Stop Mode