3-SPEED STEREO TURNTABLE WITH CD AND CASSETTE MUSIC SYSTEM USER MANUAL JTA-475 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. DEAR JENSEN® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers.
• • Start your volume control at a low setting. Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level: Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime. We Want You Listening For a Lifetime Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions - All the safety and operating instructions should be read before the appliance is operated 2. Keep these instructions - The safety and operating instructions should be kept for future reference. 3. Heed all warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions - All operation and use instructions should be followed. 5.
17. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/ NFPA No.
CAUTION Note: This product complies with DHHS Rule 21 Subchapter J at date of manufacture. Follow the advice below for safe and appropriate operation. ON PROTECTION AGAINST LASER ENERGY EXPOSURE o o o o o As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. Stop operation immediately if any liquid or solid object should fall into the cabinet. Do not touch the lens or poke at it.
Should any trouble occur, remove the power source and refer servicing to qualified personnel. PRECAUTION FORE USE • • • UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL. DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND ALL OTHER CONNECTIONS HAVE BEEN MADE. DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS AROUND THE UNIT FOR VENTILATION.
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
right speaker terminal 2. Connect the left speaker to the left speaker terminals with the red wire to L+ and the black wire to L -. 3. Connect the right speaker to the right speaker terminals with the red wire to R+ and the black wire to R -. NOTE: Make sure that the power is turned off when connecting or disconnecting the speakers. Make sure that the speakers are connected to the correct terminals.
16.) DUST COVER 1.) REMOTE SENSOR 17.) REPEAT BUTTON 2.) TUNING KNOB 18.) RANDOM BUTTON 3.) CD TRAY OPEN/CLOSE BUTTON 19.) POWER ON/OFF BUTTON 4.) CD SKIP/SEARCH FORWARD 20.) POWER ON LED INDICATOR /BACKWARD BUTTON 21.) AM/FM/FM STEREO BAND SWITCH 5.) CD TRAY 22.) FUNCTION SWITCH 6.) TAPE FAST FORWARD / EJECT BUTTON 23.) 3.5MM STEREO HEADPHONE JACK 7.) CASSETTE DUST COVER 24.) BASS BOOST ON/OFF BUTTON 8.) 45 RPM RECORD ADAPTOR 25.) VOLUME + / - BUTTON 9.
1) PROGRAM BUTTON 2) REPEAT/RANDOM BUTTON BUTTON 3) SKIP/SEARCH FORWARD SKIP/SEARCH BACKWARD BUTTON BUTTON 4) CD TRAY OPEN.CLOSE BUTTON 5) PLAY/PAUSE BUTTON 6) STOP 7) VOLUME + / - BUTTON (For CD, Tape, Phono and Tuner) BATTERY INSTALLATION 1.) Open the battery compartment cover. 2.) Insert two "AAA" (UM-4) batteries (included) and observe the polarity as indicated inside the battery compartment when installing. 3.) Replace the cover. Battery Precautions Replacement of batteries must be done by an adult.
LISTENING TO THE RADIO 1.) Press down the POWER button to turn the system "On", power LED indicator lights. 2.) Slide the FUNCTION selector to the TUNER (Radio) position. 3.) Slide the BAND selector to the desired band, AM, FM or FM STEREO. 4.) Tune to your desired station with the TUNING knob. If FM STEREO mode is selected and you tune to an FM Stereo station, the FM STEREO LED Indicator will light. 5.) Press and hold the VOLUME+/- buttons to adjust the volume level as desired. 6.
from entering the CD mechanism. Never place more than one CD in the CD tray. If two discs are loaded at the same time, the CD mechanism may jam and / or the discs themselves may be damaged. TO BEGIN CD PLAYBACK After you have loaded the CD in the player: 1.) Press the PLAY/PAUSE button to begin playback. The player will begin playback from Track 1 on the disc. 2.) Press and hold the VOLUME+/- buttons to adjust volume level as desired. 3.) To temporarily stop playback, press the PLAY/PAUSE button again.
7.) Press the STOP button to stop programmed tracks playback. Press the PLAY/PAUSE button will resume normal playback. NOTE: If you press or SKIP/SEARCH buttons during programmed playback, the player will skip forward or backward to the next track that was programmed, and not to the next track in sequence on the disc that is being played. REPEAT Playback This system has a repeat function which allows you to continuously repeat one track, or all tracks. Select the track to be repeated and begin playback.
6.) Set the Speed selector to 33, 45 or 78 rpm according to the record you are playing. 7.) Lift the tone arm from the rest and slowly move it over the record. The platter will being to turn. 8.) Move the tone arm to the beginning of the record, or to the start of a particular track. Gently lower the tone arm onto the record to start playing. 9.) Press and hold the VOLUME+/- buttons to adjust volume level as desired. 10.
To avoid damaging the tape, it is recommended to take the cassette tape out of the deck after listening. BASS BOOST Press down the “BASS BOOST” button on the main unit if you want to enhance the bass when listening to the system. Press the button again to turn off bass boost effect. LINE OUT CONNECTION You can connect this unit to your external Hi-Fi / AMPLIFIER system by connecting the LINE OUT socket to the auxiliary input socket of your Hi-Fi / AMPLIFIER system with RCA cables (not included).
Furthermore, do not expose cassettes to direct sunlight, dust or oil, and do not touch the tape surfaces. COMPACT DISC CARE Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. Do not attach adhesive tape, stickers etc., to the disc label. Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive cleaners to clean the disc. If necessary, use a CD cleaning kit.
Symptom Possible Problem Solution The unit does not AC cord is not plugged Plug the AC cord into a wall outlet. respond (no power). into a wall outlet AM band is too noisy. Sound is distorted. Wall outlet is not Plug another device into the same functioning. outlet to confirm the outlet is working. The reception at the set Slightly rotate the unit for the best location is poor. reception. Volume level is set too Decrease the volume. high. CD Player does not play.
VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
