Owner's Manual

Table Of Contents

JWM92A

Select a Band

Manual Tuning

Automatically Store / Preset Scan (AS/PS)

Auto Seek Tuning

Preset Stations Menu

Press AM button (26) to select the AM band or press FM button (25) to select the

FM band. Refer to “Multi source zone mode” on page 9 for detail of operating

instructions

The LCD will display the current station on 1st line and the preset station selection

on the 2nd line in presets menu.

Press the >>|or|<< buttons (19, 20) to seek stations up/down step by step.

Press and hold the >>| or |<< buttons (19, 20) to automatically seek to the next

or previous strong station.

Store a Station

While in AM or FM mode,

1.Press the PRESETS button (9) to access the preset menu.

2.Pre

ss I<< or >>I buttons (19, 20) or rotate the VOL/ENTER knob to select the

preset location to store.

3.Press and Hold the ENTER knob to store the current station at that preset

location.

4.Press the BACK button (2) to exit presets menu.

Recall preset stations

1.Press the PRESETS button (9) to access the preset menu.

2.Press I<< or >>I buttons (19, 20) or rotate the VOL/ENTER knob to navigate the 12

and 18 preset stations for AM or FM respectively.

3.Press the ENTER knob to conﬁrm the selection.

4.Press the BACK button (2) to exit preset menu

Automatically Sto

Select AM or FM band. Press and hold the

AS/PS button (10) for more than 3

seconds and the unit will automatically scan for and store 12 or 18 strongest stations

for AM or FM respectively. To stop this function before the automatic storing is

complete, press AS/PS button again.

Preset Scan

Select a band. Press AS/PS button to scan stations stored in the current band. The

unit will pause for 10 seconds at each preset station. Press AS/PS again to stop

scanning when the desired station is reached.

TUNER OPERATION

AUX 1

HDMI USB

9 10

11 12

28 29

8 7 6