Owner's Manual

Fast Forward/Reverse
Programmed Playback
GOTO Direct Track/Chapter Access
Press and hold the >>| or |<< buttons or press the >> or << buttons on the remote
control (16) once for FORWARD X 2. Press and hold additional times for
FORWARD X 4, X 8, X 20 or PLAY.
Press the ▶|| button on the control panel (18) or remote control (17) to end fast
forward or reverse and resume normal playback.
2. Use the ◄ ► or ▲ ▼ cursor buttons (15) on the remote control to access the
fields on the “PROG” screen.
3. Use the number buttons on the remote control to enter a track number in each
field.
4.Press the
u /|| button (17) on the remote control or highlight “PLAY” on screen
and then press the ENTER button (5) to begin playback in the numbered order
indicated To delete the list, highlight “CLEAR” and then press
ENTER. Press
PROG to exit the programmed playback screen."
Use the GOTO function to access a track (chapter) directly.
1.Press the GOTO button (25) on the remote control. The On Screen Display
information will appear with the track number highlighted.
2.Use the number keys on the remote control to enter the 3-digit track number
directly (i.e. for track 10, enter “010”)
Press the ENTER button (5) to confirm and begin playback.
17
1.Press the PROG button (7) on the remote control to access the programmed
playback screen.
JWM92A
Repeat (RPT)
Random Shuffle (RDM)
Press the button (14) on the control panel or the RPT button (20) on the
remote control multiple times during playback to select from the following repeat
play options: RPT 1 (track),RPT DIR (folder), RPT ALL (disc), OFF.
Press the button (13) during song playback to play all files in random,
shuffled order. Press RDM again to stop random play.
Remote Control Direct Track Entry
To select a track directly, use the number pad on the remote control (10).
For single digit entries, press the corresponding number for two digit entries.
Press the 10+ button followed by the last digit (i.e., for track 16, press 10+ and
then 6).