Owner's Manual

15
MP1516BT
WIRING CONNECTIONS
RCA OUT
left=white
right=red
Antenna
socket
ISO-connector
Fuse 10 A
Connector A
1. Rear right speaker (+) /Blue
2. Rear right speaker (-) /Blue-White
3. Front right speaker (+) / Grey
4. Front right speaker (-) / Grey-White
5. Front left speaker (+) / Green
6. Front left speaker (-) / Green-White
7. Rear left speaker (+) / Brown
8. Rear left speaker (-) / Brown-White
Connector B
1. No connection
2. No connection
3. No connection
4. Battery 12V (+) / Yellow
5. Antenna Power / Blue
6. Panel Light / White
7. ACC+ / Red
8. Ground / Black
A
B
External Microphone Jack
Speaker Wiring Notes
Follow the above wiring diagram to install the head unit with new or existing
speakers.
• This unit is designed for use with four (4) speakers with an impedance from
4 Ohms to 8 Ohms.
• An impedance load of less than 4 Ohms can damage the unit.
• Never bridge or combine the speaker wire outputs. When not using four
speakers, use electrical tape to tape the ends of the unused speaker outputs to
prevent a short circuit.
• Never ground the negative speaker terminals to chassis ground.