Owner's Manual
27
MP1516BT
RADIO OPERATION
Choosing a Radio Band
Press the SRC button on the faceplate or the MOD button on the remote control
to select radio mode. The radio frequency appears in the display panel together
with the frequency memory band (FM1, FM2, FM3, AM1 or AM2).
The unit has ve preset memory bands - three FM Bands (FM1, FM2, and FM3) and
two AM Bands (AM1 and AM2). Each of the ve bands can store up to six preset
stations, for a total of 30 preset memory stations.
Selecting the Frequency Band
In radio mode, press the BAND/TEL button on the faceplate or the BND/ID3
button on the remote control briey to select the desired band. The reception
band will change in the following order:
FM1 FM2 FM3 AM1 AM2
Radio Tune / Seek Function
In radio mode, press and hold the or button for 2 seconds. ”MANUSEEK”
appears on the display panel. Press the or button once to manually
adjust the radio frequency.
Tuning
Press the or button once. The radio will seek the next strong and clear
frequency station. Repeat to seek more stations with a strong signal in your
listening area.
Mono/Stereo Reception Control
The reception of distant stations may be improved by selecting “MONO”
operation. “MONO” operation may cut down some reception noise.
1. In FM radio mode, press the volume knob or press the SEL button on the
remote control until "MONO" appears on the display panel.
2. Rotate the volume knob to select STEREO or MONO.
Local / Distance Control
The local and distance reception setting can improve radio reception, depending
on the location where the radio is being used.
1. In FM radio mode, press the volume knob or press the SEL button on the
remote control until "LOCAL" appears on the display panel.
2. Rotate the volume knob to select "LOCAL" or "DX".