NAV104 Operating Instructions
NAV104 This page intentionally left blank.
NAV104 WARNINGS AND PRECAUTIONS WARNING! Please read and follow the following safety precautions. Failure to follow the instructions below may increase your risk of collision and personal injury. The Attention - Please Drive Safely! Screen is displayed each time the iGo primo software is turned ON as a reminder to make use of the system’s navigational aids in a safe manner. Before using the software, read this entire manual.
NAV104 iGo primo software provides turn-by-turn visual and voice assistance to direct you to your selected destination. The software quickly calculates step-by-step directions to any destination available on the included navigation map. The iGo primo software uses Global Positioning System (GPS) satellites, and a digital roadway map database to calculate and display travel directions.
NAV104 SAFETY INFORMATION User Agreement When the unit is first turned on, you will see the following message, warning you to operate your navigation system appropriately: You must agree to the above notice before using the navigation software. Tap to proceed to the Navigation Menu.
NAV104 Driver Safety Rules The following safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: • The driver should operate the device only when the vehicle is stopped. Only a vehicle passenger should operate the device while the vehicle is moving. When driving, the need to view the display is minimal. Voice prompts will guide you to your destinations. • It is your responsibility to comply with all traffic laws.
NAV104 WARNINGS AND PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Vehicle Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Map Information and Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 User Agreement . . .
NAV104 MODIFYING THE ROUTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 Selecting a New Destination When Already Having a Route . . . . . . . . . . . . .93 Setting a New Starting Position for the Route . . . . . . . . . . . . . . . . . . . . . . . . . .94 Editing the List of Destinations (Edit Route) . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 Pausing the Active Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NAV104 QUICK START GUIDE Follow these six easy steps and you are on your way. NOTE: Before operating your iGo Primo software, please carefully read and follow the instructions provided in the “Warnings and Precautions” section of this manual. Step 1 - Access the navigation function: You can access the navigation function by pressing the front panel NAV button. Step 2 - Start Up: After the iGo primo software starts, you will see the reminder warning to use your iGo primo software safely and lawfully.
NAV104 Step 4 - Select a Destination: You have many ways to select a destination. Select by touching screen: to select your destination by entering an address or selecting • Tap a place of interest, a location on the map or one of your Favorite destinations. You can also look up your recent destinations from the Smart History, enter a coordinate or use the location saved in a photo. • Tap to display the route parameters and the route in its full length on the map.
NAV104 Step 6 - Arriving at Your Destination When you are near your destination, the destination is indicated by a checkered flag symbol . Refer to the rest of this manual to become more familiar with the many options available on your iGo primo software.
NAV104 INTRODUCTION We hope that you enjoy using your new navigation system. This manual is designed to help you get the most out of your system. This navigation system leads you straight to your destination. You can navigate and plan your route with an easy-to-use and intuitive interface, plan your trip to suit your personal preferences and interests, and find and save (bookmark) interesting destinations before you begin your trip.
NAV104 About GPS and GNSS The unit uses a vehicle Global Positioning System (GPS)-based navigation device which uses digital map data to guide you from your selected location A to location B, using location information obtained from a Global Navigation Satellite System (GNSS).
NAV104 Acquiring a Satellite Signal The initial GPS location lock is best established when your vehicle is parked. If the device is in motion, the signal can take longer to initially connect. Once the initial coordinates are established, the software will follow you as you move and navigate. Drive your vehicle to an open area where the GPS signal can be clearly received and park the vehicle. If the device is in motion, the signal can take longer to initially connect.
NAV104 GETTING STARTED iGO primo is optimized for in-car use. There is no need to use a stylus. You can use it easily by tapping the screen buttons and the map with your fingertips. Accessing the Navigation Software Press the MENU button and touch the Navigation icon to access navigation mode. Adjusting the Navigation Voice Volume While the Navigation is on and a route has been programmed, the Navigation will speak commands.
NAV104 INITIAL SETUP When using the navigation software for the first time, an initial setup process starts automatically. Do as follows: 1. Select the written language of the application interface. Later you can change it in Regional settings. 2. Read the End User License Agreement. Tap to continue. 3. The Configuration Wizard starts. Tap to continue. 4. Select the language and speaker used for voice guidance messages. Later you can change it in Sound and Warnings settings.
NAV104 5. If needed, modify the time format and unit settings. Later you can change them in Regional settings. 6. If needed, modify the default route planning options. Later you can change them in Route settings. 7. The initial setup is now complete. The Configuration Wizard can be restarted later from the Settings menu. After the initial setup, the Navigation Menu appears and you can start using iGO primo.
NAV104 NAVIGATION MENU You can reach all parts of iGO primo from the Navigation Menu. You have the following options: • Tap to select your destination by entering an address or selecting a place of interest, a location on the map or one of your Favorite destinations. You can also look up your recent destinations from the Smart History, enter a coordinate or use the location saved in a photo. • Tap to display the route parameters and the route in its full length on the map.
NAV104 BUTTONS AND OTHER CONTROLS ON THE SCREEN When you are using iGO primo, you usually tap buttons on the touch screen. You only need to confirm selections or changes if the application needs to restart, it needs to perform a major reconfiguration, or you are about to lose some of your data or settings. Otherwise, iGO primo saves your selections and applies the new settings without confirmation as soon as you use the controls.
NAV104 List When you need to select from several options, they appear in a list. Grab the list anywhere and slide your finger up or down. Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or until the end. Alternatively, move between pages with and the buttons and tap the value that you want. Radio button When there are only Tap one of the a few choices, radio buttons to select a buttons may be new value. used instead of lists. Only one value can be selected.
NAV104 Using Keyboards You only need to enter letters or numbers when you cannot avoid it. You can type with your fingertips on the full-screen keyboards and you can switch between various keyboard layouts, for example English, Greek or numerical. Task Switching to another keyboard layout, for example from an English keyboard to a Greek keyboard. Correcting your entry on the keyboard. Instruction Tap the button and select the new keyboard layout from the list. Tap to remove the unneeded character(s).
NAV104 Beyond Single Screen Tap You usually need to tap the screen only once. However, some useful features can be accessed with combined touch screen tapping. Those are the following: Action Details Tapping and holding the Tap and keep pressing the following buttons to reach screen. extra functions: on list and menu • Tap and hold screens: the Map screen appears. • Tap and hold any of the , , , , , and buttons on the Map screen: you can rotate, tilt or scale the map continuously.
NAV104 MAP SCREEN The Map screen is the most frequently used screen of iGO primo. Navigating On the Map A small live map is displayed on the startup screen, the Navigation Menu, as a part of the button. To enlarge this small map and open the Map screen, tap . This map shows the current position (the Vehimarker, a red arrow by default), the recommended route (an orange line), and the surrounding map area. When there is no GPS position, the Vehimarker is transparent. It shows your last known position.
NAV104 When GPS position is available, the Vehimarker is displayed in full color, now showing your current position. There are screen buttons and data fields on the screen to help you navigate. During navigation, the screen shows route information. By default, only one data field is displayed in the bottom right corner. Tap this field to see all route data fields. Tap any of the data fields to suppress others and display only the selected one.
NAV104 Default data fields when cruising without a destination (tap and hold any of the fields to change its value): Field Description Shows your current speed given by the GPS receiver. Shows the speed limit of the current road if the map contains it. Shows the current time corrected with time zone offset. The accurate time comes from the GPS satellites, and the time zone information comes from the map or it can be set manually in Regional settings.
NAV104 Position Markers Vehimarker and Lock-on-Road When your GPS position is available, iGO primo marks your current position with the Vehimarker. By default, this marker is a red arrow, but you can change this icon in Settings. The exact location of the Vehimarker depends on the vehicle type used for route calculation. The vehicle type can be selected in Route settings. • If you choose pedestrian: The Vehimarker is at your exact GPS position. The direction of the icon shows your current heading.
NAV104 Objects On the Map Streets and Roads iGO primo shows the streets in a way that is similar to how the paper road maps show them. Their width and colors correspond to their importance: you can easily tell a freeway from a small street. Turn Preview and Next Street When navigating a route, the top section of the Map screen shows information about the next route event (maneuver) and the next street or the next city/town. There is a field in the top left corner that displays the next maneuver.
NAV104 Most of these icons are very intuitive. The following table lists some of the frequently shown route events. The same symbols are used in both fields: Icon Description Turn left. Turn right. Turn back. Bear right. Turn sharp left. Keep left. Continue straight in the intersection. Go left on the traffic circle, 3rd exit (next maneuver). Enter traffic circle (second next maneuver). Enter freeway. Exit freeway. Board ferry.
NAV104 Leave ferry. Approaching a waypoint. Approaching the destination. Lane Information and Signposts When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route. If lane information is available in the map data, iGO primo displays the lanes and their directions using small arrows at the bottom of the map. Highlighted arrows represent the lanes you need to take. Where additional information is available, signposts substitute arrows.
NAV104 Junction View If you are approaching a freeway exit or a complex intersection and the needed information exists, the map is replaced with a 3D view of the junction. The lanes you need to take are displayed with arrows. Signposts can also be present if information is available.
NAV104 Elements of the Active Route iGO primo shows the route in the following way: Symbol Name Description Current GPS position and Start point Your current position displayed on the map. • In pedestrian mode it is the exact GPS position. • If a vehicle is selected for route calculation and roads are near, the symbol is snapped onto the nearest road. Normally if GPS position is available, the route starts from the current position.
NAV104 Manipulating the Map Tap the map anywhere to browse it during navigation. The map stops following the current position (the Vehimarker, a red arrow by default, is not locked in a fix position on the screen any more) and control buttons appear to help you modify the map view.
NAV104 Action Button(s) Description Moving the map with drag & drop. No buttons You can move the map in any direction: tap and hold the map, and move your finger towards the direction you want to move the map. Zooming in and out Tilting up and down Rotating left and right Changes how much of the map is displayed on the screen. iGO primo uses high-quality vector maps that let you examine the map at various zoom levels, always with optimized content.
NAV104 Compass in 2D map view mode Compass in 3D map view mode , , The direction of the compass shows North. Tap the button to switch to North-up view, and then tap again to rotate the map in the previous direction. The direction of the compass shows North. Tap the button to switch to North-up view, and then tap again to rotate the map in the previous direction. Location information Tap this button to open a new screen with information about the selected map point, the Cursor.
NAV104 Quick Menu The Quick menu is a selection of controls and functions that are frequently needed during navigation. It can be opened directly from the Map screen by tapping . The menu will close after a few seconds of inactivity or if you tap . The menu will also close if you initiate simple controls like muting the device. In other cases tapping a button will open a new screen with options. Most of these functions are shortcuts. They are accessible from the menu system.
NAV104 There are more functions available than the number of buttons in the menu. In Settings, you can choose the function of each button. The following options are available: Button Description Shortcut for: Master Volume slider This slider adjusts the sound volume of the device. All sounds of the application are affected. More / Settings / Sound and Warnings / Volume / Master slider This switch mutes all sounds of the device. Tap again to reenable sounds.
NAV104 This button opens a special n/a screen with information about the current position and a button to search for nearby emergency or roadside assistance. For details, see the next chapter. This button cancels the route and stops navigation. The button is replaced with the next one if waypoints are given. My Route / Cancel Route This button skips the next waypoint from the route. n/a This button opens a 2D map scaled and positioned to show the entire route.
NAV104 With this function you can My Route / More / Load replace the active route with a Route previously saved route. 38 With this function you can search for Places of Interest in various different ways. Find / Find Places This button opens the Map screen and starts simulating the active route. My Route / More / Simulate Navigation This button opens the GPS Information screen with satellite position and signal strength information. Tap the top of the Map screen when there is no GPS reception.
NAV104 Checking the Details of the Current Position (Where Am I?) Opened from the Quick menu, this screen contains information about the current position (or about the last known position if GPS reception is not available) and a button to search for useful Places nearby. Information On This Screen: • and : Latitude and Longitude (coordinate of the current position in WGS84 format). • : Altitude (elevation information coming from the GPS receiver - often inaccurate). • : House number on the left.
NAV104 You can also perform some actions on this screen: Tap to save the current position as a Favorite destination. You can also search for assistance near your current position.
NAV104 NAVIGATING You can set up your route in different ways: • If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation). • You can also plan a route independently of your current GPS position or even without GPS reception (to achieve this, you need to turn off the GPS receiver and set a new starting point in My Route / Edit Route by tapping the flag icon at the current position). You can plan routes with multiple destinations.
NAV104 Entering an Address (United States) To enter an address as the destination, do as follows: 1. If you are on the Map screen, tap Navigation menu. to return to the 2. In the Navigation menu, tap the following buttons: , 3. By default, iGO primo proposes the country and state where you are. If needed, tap , enter the first few letters of the destination country or state on the keyboard, and select one from the list.
NAV104 • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap town from the list. ). Select the city/ 5. Enter the street name: a. Tap . b. Start entering the street name on the keyboard. c. Find the street you need: • The most likely street name is always shown in the input field. To accept it, tap .
NAV104 6. Enter the house number: . a. Tap b. Enter the house number on the keyboard. (To enter letters, tap ). c. Tap to finish entering the address. (If the entered house number cannot be found, the midpoint of the street is selected as the destination.) 7. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location.
NAV104 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey. to modify route parameters, or tap and start Tip! If you know that you will use this destination frequently, before tapping Favorites first: tap to confirm the destination, put it on the list of your then , give a name for the new Favorite, and tap to save the location. The map with the destination returns automatically.
NAV104 Entering an Address (Canada) To enter an address as the destination, do as follows: to return to the If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap the following buttons: , . 3. By default, iGO primo proposes the country, state and city where you are. If 1. , enter the first few letters of the destination needed, tap country or state on the keyboard, and select one from the list.
NAV104 • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap town from the list. ). Select the city/ 5. Enter the street name: a. Tap . b. Start entering the street name on the keyboard. c. Find the street you need: • The most likely street name is always shown in the input field. To accept it, tap .
NAV104 6. Enter the house number: . a. Tap b. Enter the house number on the keyboard. (To enter letters, tap ). to finish entering the address. (If the entered house c. Tap number cannot be found, the midpoint of the street is selected as the destination.) 7. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location.
NAV104 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
NAV104 Entering an Address Starting with the Street Name (in the United States only) You can leave the city/town name empty and start the search with the street name. This way you can search in all streets of a state. Do as follows: to return to the If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap the following buttons: , . 3. By default, iGo primo proposes the country and state where you are.
NAV104 • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap from the list. ). Select the street 5. Enter the house number: a. Tap . b. Enter the house number on the keyboard. (To enter letters, tap ). c. Tap to finish entering the address. (If the entered house number cannot be found, the midpoint of the street is selected as the destination.) 6.
NAV104 7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap journey.
NAV104 Entering the Midpoint of a Street as the Destination You can navigate to the midpoint of a street if the house number is not available: to return to the If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap the following buttons: 3. Select the country, state and city as described earlier. 4. Enter the street name: 1. , . . a. Tap b. Start entering the street name on the keyboard. c.
NAV104 5. Instead of entering the house number, tap street is selected as the destination. . The midpoint of the 6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location. Tap ) to confirm the destination, to select a different destination. or tap 7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated.
NAV104 Selecting an Intersection as the Destination To enter an address as the destination, do as follows: to return to the If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap the following buttons: 3. Select the country, state and city as described earlier. 4. Enter the street name: 1. , . a. Tap . b. Start entering the street name on the keyboard. c. Find the street you need: • The most likely street name is always shown in the input field. To accept it, tap .
NAV104 5. Enter the intersecting street name: . Tap • If only a few intersecting streets exist, their list appears immediately. • In case of a longer street, the keyboard screen appears. Start entering the name of the intersecting street on the keyboard. As soon as the street names that match the entered string can be shown on one screen, their list appears automatically. Select from the list. 6. A full screen map appears with the selected point in the middle.
NAV104 7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
NAV104 Selecting a City/Town Center as the Destination The city/town center is not the geometric center of the city but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of the important intersections. to return to the If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap the following buttons: 3. Select the country and state as described earlier. 4.
NAV104 5. Instead of entering the street name, tap . This way the center of the displayed city/town becomes the destination of the route. 6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location. Tap ) to confirm the destination, or tap to select a different destination. 7. After a short summary of the route parameters, the map appears showing the entire route.
NAV104 Entering an Address with a ZIP Code 1. All of the above address searching possibilities can be performed with entering the ZIP code instead of the city name. Find below an example with a full address: to return to the If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap the following buttons: 3. Select the country and state as described earlier. 4. Enter a new city/town using its ZIP code: 1. a. Tap , . b. Tap to open the numeric keypad. c.
NAV104 5. Enter the street name: . a. Tap b. Start entering the street name on the keyboard. c. Find the street you need: • The most likely street name is always shown in the input field. To accept it, tap . • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap from the list. ). Select the street 6. Enter the house number: a. Tap . b.
NAV104 7. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location. Tap ) to confirm the destination, to select a different destination. or tap 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
NAV104 Tips on Entering Addresses Quickly When you are entering the name of a city/town or a street: • Only those letters are offered on the keyboard that appear in possible search results. All other characters are grayed out. • As you are typing, the most likely result is always displayed in the input field. If the guess is correct, tap to select it. • After entering a couple of letters, tap the specified letters.
NAV104 Selecting the Destination from the Places of Interest You can select your destination from the Places of Interest included with iGo primo. Using the same screen, you can find a Place in different ways: • with the Quick search feature, you can quickly find a nearby Place by its name • with the Preset search feature, you can find frequently searched types of Places with only a few screen taps • you can search for a Place by its category • you can search for a Place by its name.
NAV104 4. (Optional) The Places in the list are ordered by the length of the necessary detour (when navigating a route) or by their distance from the current position (when no destination is given). . If you need to reorder the list, tap 5. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. 6. (Optional) Tap to see the details of the selected Place.
NAV104 Searching for a Place of Interest Using Preset Categories The Preset search feature lets you quickly find the most frequently selected types of Places. to return to the 1. If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap the following buttons: , . 3. The preset search categories appear: • If an active route exists, gas stations are searched along the route. • If there is no active route (destination is not selected), they are searched around the current position.
NAV104 4. Tap any of the quick search buttons to get an instant list of Places. 5. (Optional) The Places in the list are ordered by their distance from the current or last known position, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 6. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen.
NAV104 9. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
NAV104 Searching for a Place of Interest by Category You can search for Places of Interest by their categories and subcategories. to return to the If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap the following buttons: 1. , . 3. Tap . 4. Select the area around which the Place should be searched for: to search around the current position or if it is not • Tap available, around the last know position. (The result list will be ordered by the distance from this position.
NAV104 5. (Optional) If you have selected in. , select the city/town to search 6. Select one of the main Place categories (e.g. Accommodation) or tap route. to list all Places around the selected location or along the 7. Select one of the Place subcategories (e.g. Hotel or Motel) or tap to list all Places in the selected main category around the selected location or along the route.
NAV104 8. Sometimes the list of brands in the selected Place subcategory appears. Select to list all Places in the selected subcategory one brand or tap around the selected location or along the route. 9. Finally, the results appear in a list. 10. (Optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. . If you need to reorder the list, tap 11.
NAV104 14. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
NAV104 Searching for a Place of Interest by Name You can search for Places of Interest by their names. You can search around different locations or along your route in the whole Place database or in one Place category or subcategory only. to return to the If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap the following buttons: 1. , . 3. Tap . 4.
NAV104 5. (Optional) If you have selected in. , select the city/town to search 6. Tap to search in all Places, or select one of the main Place categories (e.g. Accommodation) to search in. 7. Tap to search in the selected Place category or select one of the Place subcategories (e.g. Hotel or Motel) to search in.
NAV104 8. Tap if you have not done it before. 9. Using the keyboard, start entering the name of the Place. 10. After entering a few letters, tap to open the list of Places with names containing the entered character sequence. 11. (Optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap .
NAV104 12. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. to see the details of the selected Place. Tap 13. (Optional) Tap to return to the map. 14. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 15.
NAV104 Selecting Nearby Assistance from ‘Where Am I?’ You can quickly search for nearby assistance from the ‘Where Am I?’ screen. 1. On the Map screen, tap 2. Tap to open the Quick menu. , and then . 3.
NAV104 4. Tap any of the quick search buttons to get an instant list of that type of Places. 5. (Optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 6. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle.
NAV104 8. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the to select a different destination. destination, or tap 9. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
NAV104 Selecting a Map Location as the Destination 1. If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap the following buttons: , . 3. Locate your destination on the map: move and scale the map as needed. 4. Tap the location that you want to select as your destination. The Cursor ( ) appears. 5. Tap to select the Cursor as the destination. 6. After a short summary of the route parameters, the map appears showing the entire route.
NAV104 Selecting the Destination from Your Favorites You can select a location that you have already saved as a Favorite to be your destination. 1. Access the list of Favorites: • If you are on the Map screen, tap and then tap . • If you are in the Navigation menu, tap 2. The list of Favorite destinations is displayed. and then tap . 3. Tap the Favorite that you want to set as your destination.
NAV104 5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
NAV104 Selecting One of the Most Likely Destinations (Smart History) The destinations that you have set earlier appear in the History list. Two of those recent destinations are shown in the Destination menu for easy access. Smart History offers these locations based on your navigation habits, using parameters like the current time of day, the day of week, and the current location. The more you use the navigation software, the better it can guess your desired destination. 1.
NAV104 5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
NAV104 Selecting a Recent Destination from the History The destinations that you have set earlier appear in the History. 1. Access the History: • If you are on the Map screen, tap and then tap . • If you are in the Navigation menu, tap and then tap . 2. The list of recent destinations appear. Smart History promotes three destinations to the first page based on your previous routes (most likely destinations). The rest of the destinations are ordered by time they were last selected.
NAV104 5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap your journey.
NAV104 Entering the Coordinates of the Destination You can also select a destination by entering its coordinate. Do as follows: 1. If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap to return to the . 3. Open the menu and tap . 4. You can enter the latitude and longitude values in any of the following formats: decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds. 5. (Optional) If necessary, tap coordinate in UTM format. 6.
NAV104 7. A full screen map appears with the selected point in the middle. The Cursor ( ) appears at the new location. Tap to confirm the to select a different destination. destination, or tap 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated.
NAV104 Building a Route from the List of Destinations (Create Route) You can also build your route destination by destination from the My Route menu. 1. If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap 3. Tap to return to the . . 4. There is only one line in the list of route points, the start point of the route, normally the current GPS position. 5. Tap to select the destination. 6.
NAV104 7. When the new destination is selected, the list returns. 8. To add more destinations, tap where you want to insert the new route point in the list, and repeat the above procedure.
NAV104 VIEWING THE ENTIRE ROUTE ON THE MAP It is easy to get a map overview of the active route. Do as follows: 1. If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap to return to the . 3. Tap . The active route is displayed in its full length on the map together with additional information and controls.
NAV104 CHECKING ROUTE PARAMETERS AND ACCESSING ROUTE RELATED FUNCTIONS You can check different parameters of the route recommended by iGo primo. 1. If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap . 3. The following pieces of information are displayed: • The name and/or address of the destination. • Warning icons (if any). They provide extra information about your route (e.g. unpaved roads or toll roads to be taken). • The total time of the route.
NAV104 MODIFYING THE ROUTE When navigation is already started, there are several ways to modify the active route. The following sections show some of those options.
NAV104 Setting a New Starting Position for the Route For normal navigation, all routes are planned from the current position. In order to check future routes, simulate them or see their length in time and distance, you can turn off the GPS receiver. Then you can set the starting point of the route to a different location than the current GPS position. 1. If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap 3.
NAV104 4. The first line is the start of the route, normally the current GPS position. Tap and confirm your action at the warning message. 5. The Destination menu appears and you can select the start point of the route the same way you select a destination. 6. When the new start point is set, tap . 7. The map returns with a transparent Vehimarker (showing that there is no GPS reception). If an active route already existed, it is now recalculated starting from the selected location. 8.
NAV104 Editing the List of Destinations (Edit Route) You can edit the route by modifying the list of destinations. You can add or remove destinations, modify the start position or reorder the list. 1. If you are on the Map screen, tap Navigation menu. 2. In the Navigation menu, tap 3. If you already have a route, tap to return to the . . 4. You have the following options: • Tap to add a new destination. • Tap to delete a destination. • Tap to modify the start point of the route.
NAV104 Pausing the Active Route You do not need to pause the active route: when you start driving again, iGo primo restarts the voice instructions from your position. Canceling the Active Route To cancel the navigated route, do one of the following: • If you are on the Map screen, tap and then tap (If you have a route with waypoints, you need to tap are deleted.) and then tap • In the Navigation menu, tap active route is deleted with all its waypoints. . until all waypoints .
NAV104 Checking Route Alternatives when Planning the Route You can select from different route alternatives or change the route planning method after you have selected a new destination. Do as follows: 1. Select a destination as explained earlier, and go to the route confirmation screen. 2. Tap . 3. Tap . 4. You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map.
NAV104 5. Or if you cannot find a good alternative, tap routes with different routing methods. and scroll down for 6. Select one of the route alternatives and tap to return to the previous screen. iGo primo recalculates the route. The orange line now shows the new recommended route. Checking Route Alternatives for an Existing Route To recalculate the active route with a different route planning method, you can modify the Route settings.
NAV104 3. Tap . 4. Tap . 5. You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map. 6. Or if you cannot find a good alternative, tap routes with different routing methods. and scroll down for 7. Select one of the route alternatives then tap and hold for a few seconds to return to the Map screen. iGo primo recalculates the route. The orange line now shows the new recommended route.
NAV104 Changing the Vehicle Used in Route Planning To recalculate the active route for a different vehicle, do as follows. These changes can also be made in Settings. 1. On the Map screen, tap 2. Tap and then tap . and then tap one of the following: • • • • • • 3. iGo primo recalculates the route optimized for the new vehicle type. The orange line now shows the new recommended route.
NAV104 Changing the Road Types Used in Route Planning To recalculate the active route with different road type preferences, do as follows. These changes can also be made in Settings. 1. On the Map screen, tap and then tap . 2. Tap any of the listed road types to modify the route. If needed, scroll the list for all road types.
NAV104 SAVING A LOCATION AS A FAVORITE DESTINATION You can add any location to Favorites, the list of frequently used destinations. 1. Select a destination as described before. It can be an address, a Place, any location on the map, a previously used destination from History, a coordinate or a location where a photo was taken. 2. When the full screen map appears with the selected location in the middle, tap . 3. Tap . 4. (Optional) Using the keyboard, you can change the name offered for the Favorite.
NAV104 SAVING A LOCATION AS AN ALERT POINT You can save any map location as an alert point (for example a speed camera or a railroad crossing). 1. Browse the map and select a location. The red Cursor appears there. 2. Tap . 3. Scroll down the list and tap . 4. On the newly opened screen, select the type of the alert point, the direction from which you expect the alert, and (if applicable) the speed limit for this alert point. 5. Tap 104 to save the location as a new alert point.
NAV104 EDITING AN ALERT POINT You can edit a previously saved or uploaded alert point (for example a speed camera or a railroad crossing). 1. Browse the map and select the alert point to edit. The red circle appears around the alert point. 2. Tap . 3. Scroll down the list and tap . 4. On the newly opened screen, modify the type of the alert point, the direction from which you expect the alert, or (if applicable) the speed limit for this alert point. 5. Tap to save the changes to the alert point.
NAV104 WATCHING THE SIMULATION OF THE ROUTE You can run a simulated navigation that demonstrates the active route. Do as follows: 1. If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap 3. Tap . . 4. Scroll down the list and tap . The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route.
NAV104 5. (Optional) You have the following controls during the simulation (the control buttons disappear after a few seconds but you can open them again if you tap the map): • : Jump to the next route event (maneuver). • : Pause the simulation. • : Jump to the previous route event (maneuver). • : Tap to increase the speed of the simulation to 4, 8 or 16 times faster. Now tap again to return to the normal speed. 6. Tap to stop the simulation.
NAV104 This page intentionally left blank.
NAV104 REFERENCE GUIDE On the following pages you will find the description of the different concepts and menu screens of iGo primo. CONCEPTS Smart Zoom Smart Zoom provides much more than just a usual automatic zoom feature: • While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily recognize your maneuver at the next junction. If the next turn is at a distance, it will zoom out and lower the view angle to be flat so you can see the road in front of you.
NAV104 Route Calculation and Recalculation iGo primo calculates the route based on your preferences: Route planning methods: • : Gives a quick route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars. • : Gives a route that has the smallest total distance of all possible routes. It can be practical for slow vehicles. • : Gives a quick but fuel efficient route based on the fuel consumption data given in Green Routing settings (page 88).
NAV104 • Maneuver restrictions and directional constraints (if they are applied to bicycles in the map data) are taken into account when planning a route. • Roads are used only if access for bicycles or pedestrians is allowed. • Controlled-access roads are excluded from routes. • A private road is used only if the destination is there. • Speed limits are not used in route calculation and an average cycling speed is used when calculating the estimated time of arrival.
NAV104 Road types used or avoided in route calculation: • • • • • • Whenever data exist, route calculation takes into account statistical traffic data for the given day of week and time of day. Real-time Traffic events are also taken into account and sometimes greatly modify the route. iGo primo automatically recalculates the route if you deviate from the proposed itinerary or if a newly received Traffic event concerns a part of the recommended route.
NAV104 Green Routing Route calculation is not only about finding the quickest or shortest route. For some of the vehicle types, you can also check the fuel consumption and CO2 emission when planning a route, and you can create cost effective routes with less effect on the environment. In Settings, select to enter the necessary parameters of your vehicle and the average fuel price.
NAV104 Road Safety Cameras and Other Proximity Alert Points There is a special proximity warning for road safety cameras (like speed or red light cameras) and other proximity alert points (like schools or railroad crossings). These alert points are preloaded in iGo primo. You can download more from www. naviextras.com or you can upload points in a specific text file if needed. You can also add your own alert points or edit the preloaded or uploaded points.
NAV104 GPS Position Quality Indicators You can find useful information in the top corners of menu screens. In the top right corner, the GPS reception quality icon shows the current accuracy of the position information. Icon Description iGo primo has no connection to the GPS receiver: GPS navigation is not possible. Devices with a built-in GPS receiver are permanently connected. On such devices, the icon does not appear in normal circumstances.
NAV104 ‘MORE’ MENU The ‘More’ menu provides you with various options and additional applications. Tap the following buttons: Button , . Description You can configure the program settings, and modify the behavior of iGo primo. Fine-tune route planning options, change the look of the Map screen, turn on or off warnings, or restart the Configuration wizard, etc. See the next chapter for details. Visit www.naviextras.com to get additional content, such as new maps or 3D landmarks and useful applications.
NAV104 If you save your trip logs when you arrive at some of your destinations or let the application automatically save the trip logs for you, those logs are all listed here. Tap one of the trips to see the trip statistics, speed and altitude profile. If track log has also been saved, you can display it on the map with the selected color. Track logs can be exported to GPX files for later use. Select a country from the list and see useful driving information about the selected country.
NAV104 SETTINGS MENU You can configure the program settings, and modify the behavior of iGo primo. Tap the following buttons: , The Settings menu has several options. Tap full list. Button , . or scroll with your finger to see the Description Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. The content of the Quick menu is fully customizable.
NAV104 You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, choose suitable color themes from the list for both daytime and night use, change the red arrow to a 3D car model, show or suppress 3D buildings, turn track logging on or off, and manage your Place visibility sets (which Places to show on the map). Settings related to guidance on the map screen can be adjusted here.
NAV104 Sound and Warnings Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Button Description Tap this button to adjust the volume of the different sounds in the application. A new screen shows the different sound types and their controls. See below for details. This button shows the current voice guidance profile.
NAV104 This feature allows you to receive a warning when approaching a Road Safety Camera. You must ensure on your own liability that using this feature is legal in the country where you intend to use it. This button is not displayed when GPS position is not available or if you are in certain countries where road safety camera warning is prohibited. Even if the button is available, you are responsible for checking whether it is legal to use this feature at your location.
NAV104 You can control the volume of the following sound types: Button Description This is the main volume control. These controls affect all below sounds. They can also be accessed from the Quick menu. These controls affect the volume of the guidance sounds (verbal instructions). These controls affect the volume of the alert sounds (beeps). These controls affect the volume of the background music. Key sounds provide audible confirmation of tapping the touch screen. These controls affect key sounds.
NAV104 Customize Quick Menu The content of the Quick menu is fully customizable. Tap the button you want to change, and select its new function from the list. Traffic Settings The recommended route is not always the same between two points. Whenever suitable data exists, offline statistical traffic information (historical speed information or traffic patterns) can be taken into account in the route calculation based on the time of day and the day of week. This function is subject to data availability.
NAV104 Route Settings These settings determine how routes will be calculated. Button Description You can set the type of vehicle you will use to navigate the route. Based upon this setting, some of the road types can be excluded from the route, or some of the restrictions may not be taken into account in route calculation. The route calculation can be optimized for different situations and vehicle types by changing the planning method. See below for details.
NAV104 iGo primo excludes unpaved roads by default: unpaved roads can be in a bad condition and usually you cannot reach the speed limit on them. Carpool or HOV lanes can be used if a given number of passengers are traveling in the vehicle. You should check whether you are allowed to use carpool lanes before enabling this road type. Vehicle types: • Maneuver restrictions and directional constraints are taken into account when planning a route. • Roads are used only if access for cars is allowed.
NAV104 • • All maneuvers are available in intersections. • Directional constraints are taken into account the way that opposite direction is allowed with a low speed. • A private road is used only if the destination is there. • Walkways are excluded from routes. • Maneuver restrictions and directional constraints are taken into account when planning a route. • Roads are used only if access for buses is allowed. • Private roads, resident-only roads and walkways are excluded from routes.
NAV104 Green Routing Settings These settings determine how Green routes will be calculated. They are also used to display the cost and CO2 emission of routes. Button Description Enter the average consumption of your vehicle when used in built-up areas. If necessary, tap select and to change the measurement unit. Enter the average consumption of your vehicle when used on highways. If necessary, tap select and to change the measurement unit. Select the engine and fuel type of your vehicle.
NAV104 Map Settings You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, choose suitable color themes from the list for both daytime and night use, change the red arrow to a 3D car model, show or hide 3D buildings, turn track logging on or off, and manage you Place visibility sets (which Places to show on the map). The map is always shown on the screen so that you can see the effect when you change a setting.
NAV104 Show or suppress 3D city models, 3D artistic or block representation of full city building data containing actual building size and position on the map. Turn on or off track log saving, that is, saving the sequence of the locations your journeys go through. Select which Places to show on the map while navigating. Too many Places make the map crowded so it is a good idea too keep as few of them on the map as possible. For this, you have the possibility to save different Place visibility sets.
NAV104 Visual Guidance Settings Settings related to guidance on the map screen can be adjusted here. Button Description The data fields in the corner of the Map screen can be customized. Tap this button and select the values you want to see. The values can be different when you navigate a route from when you are just cruising without a given destination.
NAV104 Display Settings Display related settings include menu animations, separate skins for daytime and night use and the brightness of the display. Button Description When animation is turned on, buttons on menus and keyboard screens appear in an animated way. Screen transitions are also animated. Select the style and colors of the application used in daytime mode. Select the style and colors of the application used in night mode. Adjust the display backlight.
NAV104 Trip Monitor Settings Trip logs and track logs contain useful information about your trips. Trip logs can be saved manually when you reach your destination or you can turn on the automatic saving here. You can access these logs in the Trip monitor. Trip monitor is available from the More menu. Button Description Trip monitor can record statistical data of your trips. If you need these logs later, you can let the application save them automatically for you. This is not a button.
NAV104 GLOSSARY 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
NAV104 North-up map orientation In North-up mode the map is rotated so its top always faces North. This is the orientation for example in Find on Map. See also: Track-up map orientation. Road Safety Camera Special alert points for speed, red light or bus lane cameras. Different data sources are available. You can configure iGo primo to warn you when you approach one of these cameras. Detecting the location of Road Safety Cameras is prohibited in certain countries.
NAV104 END USER LICENSE AGREEMENT 1 The contracting parties 1.1 This Agreement has been entered into by and between NNG Kft. (registered seat: 23 Bérc utca, H-1016 Budapest, Hungary; Company reg.no.: 01-09-891838) as Licensor (hereinafter: Licensor) and You as the User (hereinafter: User; the User and the Licensor jointly referred to as: Parties) in subject of the use of the software product specified in this Agreement. 2 Conclusion of the Agreement 2.
NAV104 4.5 Your rights under this Agreement will terminate immediately without notice from Licensor if you materially breach it or take any action in derogation of Licensor’s and/or its licensors’ rights to the Software Product. Licensor may terminate this Agreement should any Software Product become, or in Licensor’s reasonable opinion likely to become, the subject of a claim of intellectual property infringement or trade secret misappropriation.
NAV104 7.1.3 to translate the Software Product (including translation (compilation) to other programming languages); 7.1.4 to decompile the Software Product; 7.1.5 to evade the protection of the Software Product or to modify, circumvent or obviate such protection through technological or by any other means; 7.1.
NAV104 8.5 The Licensor also draws the attention of the User to the fact that, when using the Software Product in any form of vehicle, observing the traffic regulations and rules (e.g. use of obligatory and/or reasonable and suitable security measures, proper and generally expected care and attention in the given situation, and special care and attention required due to the use of the Software Product) is the exclusive responsibility of the User.
NAV104 9.4 Contents and services provided by the Licensor or an agent of the Licensor The Licensor or a contractual partner may offer various products and services to the User through www.naviextras.com. The User may only use these services when the User has read and understood the relevant end user license agreement(s) at www.naviextras.com and the User is obliged to use the services in line with the terms and conditions thereof. 9.
Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.jensen.
NAV104 Installation Guide Insert one end of the SmartBus cable into the “DATA BUS” slot on the side of the NAV104 and secure it with an 11 mm ( 0.4 in ) screw (provided). Connect the other end of the cable to the NAV104 input on the back of your Jensen navigation-ready head unit. Secure Smartbus Cable with 11 mm ( 0.4 in ) Screw Where applicable, secure the cable to the radio using an 11 mm ( 0.4 in ) screw. DATA BUS SMB GPS ANTENNA Jensen 1.
Parts List NAV104 Placement √ NAV104 navigation module The NAV104 should be installed under the back or front seat. It can also be installed in the trunk, if necessary. Do not install the NAV104 where it will come in contact with water or direct sunlight.
