UNDER CABINET UNIVERSAL BLUETOOTH MUSIC SYSTEM USER MANUAL SMPS-628 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
CAUTION Follow the advice below for safe operations. To reduce the risk of fire, do not place any heating or cooking appliance beneath this unit. Stop operation immediately if any liquid or solid object should fall into the cabinet. If the unit is not to be used for a long period of time, make sure that all power sources are disconnected from the unit. Remove all batteries from the battery compartment, and unplug the AC-DC adaptor from the wall outlet.
DEAR JENSEN® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
PREPARATION FOR USE Installing the unit under a cabinet 1. Make the position of the 3 holes by using the supplied template. Use a drill to make the holes. 2. When the cabinet door overhangs the shelf and obstructs the unit, you can adjust the unit/shelf height. 3. Install the unit with the supplied mounting kit. Unpack the unit carefully to remove all the accessories from the packing. Verify that the following accessories are present before setting up the unit.
20 25 21 23 22 24 1 STANDBY BUTTON 13 FM INDICATOR 2 LIGHT BUTTON 14 LINE-IN INDICATOR 3 SOURCE BUTTON 15 PM INDICATOR 4 TIMER BUTTON 16 TIMER INDICATOR 5 MEM / CLK BUTTON 17 MEMORY INDICATOR 6 PAIR / 18 LINE IN JACK 7 TUNE - / SKIP - BUTTON 19 DC IN JACK 8 TUNE +/ SKIP + BUTTON 20 LED LAMP 9 VOL - BUTTON 21 BATTERY COMPARTMENT BUTTON 10 VOL + BUTTON 11 BUTTON 22 SPEAKER (L) 12 BLUETOOTH 24 CORD WRAP 25 NFC LINKING POINT 23 SPEAKER (R) INDICATOR E-4
POWER SOURCE The SMPS-628 operates using the supplied AC Adapter (Operate at 120V ~ 60Hz) AC ADAPTOR OPERATION NOTE: Only use the supplied adapter 1. Plug the AC adaptor into normal AC power outlet socket. 2. Insert the DC plug of the AC adaptor cord into the DC IN JACK (#18) at the back of the unit. WARNING : • Before connecting to the power supply, ensure that the supply corresponds to the information on the rating label at the back of the apparatus.
CLOCK SETTING 1. In standby mode, press and hold the MEM / CLK BUTTON (#5). The “12H” will blink. 2. Press the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to set the 12Hour or 24Hour format. 3. Press the MEM / CLK BUTTON (#5) to confirm. The hour digits will blink. 4. Press the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to set the current hour. 5. Press the MEM / CLK BUTTON (#5) to confirm. The minute digits will blink. 6.
LISTENING TO THE RADIO 1. Press the STANDBY BUTTON (#1) to turn on the SMPS-628. 2. Press the SOURCE BUTTON (#3) repeatedly to select FM band, the FM INDICATOR (#13) and frequency will show on the LCD display. 3. Press and hold the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to search the next/previous available station. 4. If the reception is poor, try manual tuning to fine-tune the station.
5. If you are pairing (linking) your computer to the speaker using Bluetooth, you may need to set the SMPS-628 as your computer’s default sound device. 6. After successfully pairing (linking) the Bluetooth enable device, the BLUETOOTH INDICATOR (#12) will stop flashing and remain lit, and a confirmation tone will be heard. 7.
USING THE SMPS-628 AS A HANDS-FREE SPEAKERPHONE To use SMPS-628 as a speakerphone for receiving a phone call from a Bluetooth enabled phone. 1. Follow the “Pairing a Bluetooth enabled device with the SMPS-628” section above to set up the Bluetooth connection with your smartphone. 2. When a call is received when music is playing, the music will pause, and a ringtone will be heard from the SMPS-628. Press the BUTTON (#11) once to answer the call. 3. Use the VOLUME +/- buttons to adjust the volume level. 4.
LINE-IN OPERATION You can play other music sources (iPod, MP3 or other digital audio players) through the speakers of the SMPS-628 by connecting the LINE-IN Jack (#18) to your external player’s audio out jack or headphone jack. 1. Plug one end of an audio cable (not included) into the LINE-IN Jack (#18) and the other end of the cable to the headphone jack of your digital audio player. 2. Turn ON the SMPS-628 and your external audio device. 3. Tap the SOURCE BUTTON (#3) repeatedly to select AUX mode.
SPECIFICATIONS Power Adaptor: Battery Back-up: Bluetooth: Frequency Range: Audio Power output: Dimensions: AC input 120V~ 60Hz 10W DC Output 5V 1.2A 2 x DC 1.5V UM-4 type batteries (not included) Bluetooth Specification version 2.1 Support profile A2DP / HFP FM 87.5 – 108 MHz 2W (RMS) x2 6.6 cm (H) x 23.2 cm (W) x 17.0 cm (D) TROUBLESHOOTING GUIDE PROBLEM The unit does not respond (no power) POSSIBLE CAUSE REMEDY The unit is disconnected from the AC outlet. Reconnect to the AC outlet.
SPECTRA GREEN NOTICE At Spectra, environmental and social responsibility is a core value of our business. We are dedicated to continuous implementation of responsible initiatives with an aim to conserve and maintain the environment through responsible recycling. Please visit us at http://www.spectraintl.com/green.htm for more information on Spectra’s green initiatives or to find a recycler in your area. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
