Manualshelf

Use and Care Manual

ManualsBrandsJENSEN ManualsElectricalUnder Cabinet Universal Bluetooth Music System - Silver
12345678910
Setting the Radio Station Presets
Pairing a Bluetooth enabled device with the SMPS-628.
E-7
LISTENING TO THE RADIO
BLUETOOTH OPERATION
1. Press the STANDBY BUTTON (#1) to turn on the SMPS-628.
2. Press the SOURCE BUTTON (#3) repeatedly to select FM band, the FM
INDICATOR (#13) and frequency will show on the LCD display.
3. Press and hold the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to
search the next/previous available station.
4. If the reception is poor, try manual tuning to fine-tune the station. Press the TUN+
/ SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) briefly to manually tune
through the frequency band.
5. Adjust the VOL + / VOL – (#10/#9) to obtain the desired volume level.
1. Press the STANDBY BUTTON (#1) to turn on the SMPS-628.
2. Press the SOURCE BUTTON (#3) repeatedly to select FM band, the FM
INDICATOR (#13) and frequency will show on the LCD display.
3. Press the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to select the
desired station.
4. Press the MEM / CLK BUTTON (#5) to enable the program function and the
program number “P01” will show on the LCD display and flashing.
5. Press the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to select the
desired program number of program.
6. Press the MEM / CLK BUTTON (#5) to confirm.
7. Repeat above steps #3 and #6 to preset up to 20 stations.
8. To retrieve one of the preset stations already programmed, press
BUTTON (11) repeatedly until you reach the desired program number of the
station.
1. Press the STANDBY BUTTON (#1) to turn on the SMPS-628.
2. Press the SOURCE BUTTON (#3) repeatedly to select Bluetooth Mode. The
BLUETOOTH INDICATOR will show on the LCD display and flash. The
SMPS-628 will enter the Pairing/Discoverable mode.
3. Turn on the Bluetooth function for the device you want to link to, and enable the
search or scan function to find the SMPS-628.
4. Select ” SMPS-628” from the device list when it appears on your device screen. If
required, enter the pass code ”0000” to pair (link) the unit with your device.
Note :
The LCD display will change to show the clock time after a few seconds. Press the
TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to check the tuned
frequency.
The SMPS-628 allows you to store up to 20 stations for easy recall at any time.