MODEL JCR-300 AM/FM TALKING DUAL ALARM CLOCK RADIO WITH TALK ’N SET® USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
WARNINGS WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICING TO QUALIFIED SERVICE PERSONNEL.
11) Only use attachments/accessories specified by the manufacturer. 12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel.
DEAR JENSEN CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
LOCATION OF CONTROLS Controls and Functions of Unit 1. Volume Control 2. ALARM 1 (AL1) On/Off Button 3. Trigger On/Off Switch 4. < (Down) Button 5. Set Button 6. > (Up) Button 7. AM/FM Band Selector 8. ALARM 2 (AL2) On/Off Button 9. Tuning Control 10. Sleep Button 11. Snooze Bar (also works as Trigger Button for “Talk ’N Set”) 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
IMPORTANT NOTES Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. • Humid, moist or dusty places. • Places subject to constant vibration. • Noisy places. POWER REQUIREMENTS This unit operates on 120V~ 60Hz and requires 2 x CR2032 Lithium batteries (included) for system and time backup during power outage.
WHAT IS TALK’N SET? Talk ’N Set is an innovative clock operating system using the latest voice recognition technology. It’s the HANDS-FREE way to set your alarm clock. No more fumbling with instructions or pressing multiple buttons to set the time and alarm.
Time Set Time Alarm Set Alarm Alarm Sound Alarm Off Snooze Play Sleep Sound Display Cancel To check the current time. * Factory preset time is 12:00AM. To set the current time in AM or PM. To check the alarm time and status of AL1 & AL2. If the alarm is currently off, you have the option to turn it on or vice versa. * Factory preset alarm time is 7:00AM for AL1 and 8:00AM for AL2. To set the alarm time of AL1 & AL2 in AM or PM. To set the alarm sound for AL1 & AL2.
7. When the alarm source is successfully understood, the unit will reply, “Please say the time you would like the alarm to sound, including AM or PM” while the current alarm time is displayed. 8. Say the time you wish Alarm One to sound in a clear, normal voice without any pause between words. Example: to set Alarm One to 10:19AM, say “Ten Nineteen AM”. 9. When the alarm one time is successfully understood, the unit will reply “Alarm One is now set to …” and repeat the time you gave.
1. 2. 3. 4. Start by saying the trigger word “Hello Clock Radio” or press the SNOOZE BAR (#11). The unit will reply “Yes” and will wait for your next command. Say “Alarm” and the unit will announce the Alarm One time, play a brief sample of the alarm sound and also ask if you want to turn the alarm off if on. Alarm Two settings will be announced in the same way once the Alarm One setting checks are completed. a. Example: You say “Alarm”. b.
2. 3. If you do not wish the alarm to sound again, you can disable it by pressing either the AL1 ON/OFF BUTTON (#2) or AL2 ON/OFF BUTTON (#8). The corresponding alarm indicators on the display (#25 & #26) will go off. To enable the alarms again, press either the AL1 ON/OFF BUTTON (#2) or AL2 ON/OFF BUTTON (#8). The corresponding alarm indicators on the display (#25 & #26) will turn on. USING TALK ’N SET 1.
- When sleep sound is playing, its volume can be adjusted from low to high (level 1-4) by pressing the > (UP) (#6) or < (DOWN) (#4) BUTTONS. The selected sleep sound volume will be displayed. To change the sleep sound during sleep, press the SNOOZE BAR (#11) and use “Play Sleep Sound” voice command to change it as usual. Say “Cancel” when asked to choose the sleep time to keep the current sleep time. LISTENING TO RADIO 1. 2. 3. 4. 5.
Note: In very rare case (such as an electrostatic discharge on a dry cold winter day), if the unit still fails to reset after pressing the RESET Button, you should unplug it from the AC power and then remove the backup batteries from the battery compartment at the bottom of the unit for at least 10 minutes.
90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
