Owner's Manual

VM9116

Demo Sub-menu Features

The Demo mode is on and set to Auto run by default. The Demo mode will

display various user interface TFT display pages such as the Radio, Disc, Aux In,

and Camera sources. The Demo mode will also display the Equalizer and Settings

menu pages. Touching any portion of the touch screen will pause the Demo mode

temporarily. If the touch screen is not pressed again (within 30 seconds) the Demo

mode will resume.

To turn the Demo mode o, access the Settings Menu and turn Auto run to OFF.

TS Cal (Screen Calibration)

To access the “Screen Calibration” function from the SETTINGS MENU, select the

“TS CAL” option.

After entering calibration mode, a crosshair + appears in a corner quadrant of the

screen. To begin calibration, touch and hold the crosshair for one second until it

moves to the next quadrant. Continue for each quadrant until the calibration is

completed.

Exiting the System Settings Menu

To exit setup mode and resume normal playback, touch the Setting button on the

screen.