Owner's Manual

18
VM9126
Hardware Sub-menu Features
If the rear-view video camera is connected, the unit is on, Camera mode is selected
upon shifting into REVERSE gear. If the monitor is in display mode, the monitor
automatically switches to CAMERA mode upon reverse driving. When the reverse
driving stops, the monitor return to its original input mode.
Setting Options Function
Camera In Normal Reverse the camera image as if looking
through a rear-view mirror.
Mirror
Video Input (Input
circuitry auto detects the
video signal from the
Aux In source).
NSTC
The color signals are output in the
standard NTSC format.
PAL
The color signals are output in the
standard PAL format.
Auto
The color signal output is switched
automatically based on the current
video input signal - NTSC or PAL.
Demo Sub-menu Features
The Demo mode is on and set to Auto run by default. The Demo mode will
display various user interface TFT display pages such as the Radio, Disc, Aux In,
and Camera sources. The Demo mode will also display the Equalizer and Settings
menu pages. Touching any portion of the touch screen will pause the Demo mode
temporarily. If the touch screen is not pressed again (within 30 seconds) the Demo
mode will resume.
To turn the Demo mode o, access the Settings Menu and turn Auto run to OFF.
TS Cal (Screen Calibration)
To access the “Screen Calibration” function from the SETTINGS MENU, select the
“TS CAL” option.
After entering calibration mode, a crosshair + appears in a corner quadrant of the
screen. To begin calibration, touch and hold the crosshair for one second until it
moves to the next quadrant. Continue for each quadrant until the calibration is
completed.
Exiting the System Setup Menu
To exit setup mode and resume normal playback, touch the Setting button on the
screen.