VM9226BT Operating Instructions 160 watts peak 40W x 4
VM9226BT CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9226BT Mobile Multimedia Receiver for maximum enjoyment.
VM9226BT FEATURES Congratulations on your purchase of the Jensen VM9226BT Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9226BT installed by a reputable installation shop.
VM9226BT Chassis • • • • • • 2.0 DIN (Import / ISO-DIN Mountable) Fixed Front Panel 6.
VM9226BT WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This is a violation of federal law. WARNING! Never disassemble or adjust the unit. WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water. WARNING! Never use irregular discs.
VM9226BT CONTROLS AND INDICATORS 12 1 2 EJECT 3 SRC 4 EQ VM9226BT 13 5 6 7 8 9 SD CARD AV INPUT OPEN 10 11 1. D isc Slot 2. EJECT Button Press to eject a disc. 3. SRC Button Press to switch between the available audio/video sources applied to the unit. 4. NAV Button Press to toggle back and forth between the navigation and currently selected source. 5. Reset Button Press to reset system settings to factory default (except password and parental lock settings). 6.
VM9226BT 1. REMOTE CONTROL See Table 1 for remote control functions.
VM9226BT Table 1: Remote Control Functions Button Function Name # DVD VCD MENU 1 Enters the main menu of the disc. Turns on/off PBC when playing VCD. TITLE 2 Enters the Plays the title menu first ten of the disc. seconds of each chapter/ title. MUTE 3 Toggles on/off audio output. Toggles on/ off audio output. Toggles on/ Toggles off audio on/off output. audio output. Toggles on/off audio output. POWER (( ) ) 4 Turns the power on/ off. Turns the power on/ off. Turns the power on/ off.
VM9226BT Table 1: Remote Control Functions Button Function Name # DVD PHOTO/ SUBTITLE 9 Language selection for subtitle. DISP/ CLEAR 10 Displays VCD iPod Delete entry or move backwards to correct error in Direct Access mode. Displays playing information. Display playing information. Displays playing information. Delete entry or move backwards to correct error in Direct Access mode. Delete entry or move backwards to correct error in Direct Access mode.
VM9226BT Table 1: Remote Control Functions Button Function Name # DVD VCD TUNER CD/MP3/ iPod USB VOL + 16 Increases volume. Increases volume. Increases volume. Increases volume. Increases volume. 17 Selects the previous chapter for playback. Selects the previous chapter for playback. Searches for an available radio station by decreasing tuning frequency. Selects the previous track for playback. Pauses playback/ starts playback. 18 Pauses playback/ starts playback.
VM9226BT Table 1: Remote Control Functions Button Function Name # DVD PIC 24 Displays Displays set-up set-up parameters. parameters. OPEN/ CLOSE ( ) 25 Opens/ closes the TFT monitor. TILT 26 TILT VCD TUNER CD/MP3/ USB iPod Opens/ closes the TFT monitor. Opens/ closes the TFT monitor. Opens/ closes the TFT monitor. Opens/ Closes the TFT monitor. Decreases monitor tilt angle. Decreases monitor tilt angle. Decreases Decreases Decreases monitor monitor monitor tilt angle. tilt angle.
VM9226BT Table 1: Remote Control Functions Button Function Name # SETUP VCD TUNER CD/MP3/ USB iPod 31 Displays Setup menu. Displays Setup menu. Displays Setup menu. Displays Setup menu. Displays Setup menu. EQ 32 Accesses equalizer menu. Accesses equalizer menu. Accesses equalizer menu. Accesses equalizer menu. Accesses equalizer menu. RDM /# 33 Plays all chapters in random order. Plays all tracks in random order.
VM9226BT OPERATING INSTRUCTIONS Power On / Off Press the /SRC button to turn the unit on. The buttons on the front of the unit light up and the current mode status appears on the LCD. Press and hold the button to power off the unit. Audible Beep Confirmation An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu. Mute Press momentarily to activate the MUTE function. Press again to resume normal listening.
VM9226BT External Devices External peripheral devices, including a game console, camcorder, navigation unit, iPod®, Zune, etc. can be connected to this unit via RCA output using an A/V Media Adapter Cable (not included). MUTE SD CARD AV INPUT Right Audio Left Audio Ground V ideo 1 2 VM9226BT 3 4 3.5mm A/V Cable (not included) Connect the external device to the A/V Media Adapter Cable and then plug the cable into the A/V INPUT connector on the front of the radio.
VM9226BT Audio Control Menu The Audio Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer. Equalizer Touch the EQ screen.
VM9226BT Table 2: Equalizer Adjustments Setting Adjustable Range Function BCF 60 Hz Selects the low pass filter frequency. Touch the + or - buttons to adjust the settings. 80 Hz 100 Hz 200 Hz MCF 0.5 kHz 1 kHz 1.5 kHz Selects the mid pass filter frequency. Touch the + or - buttons to adjust the settings. 2.5 kHz TF 10 kHz 12.5 kHz 15 kHz Selects the high pass filter frequency. Touch the + or - buttons to adjust the settings. 17.
VM9226BT Balance-Fader Touch the BAL-FAD button on the left side of the equalizer screen to display the balance/fader screen. Setting Adjustable Range Function Balance -16 to +16 Balances the audio output levels between the left and right side of the vehicle. Touch the or button to change the setting. Fade -16 to +16 Balances the audio output levels between the front and back side of the vehicle. Touch the or button to change the setting.
VM9226BT System Reset [RESET] Button To correct a system halt or other illegal operation, use the tip of a pen to press the reset button located on the front bottom-left corner of the unit behind the protective cover. After a system reset, the unit restores all factory default settings. NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the reset is complete. Image/Display Settings Video Output Modes Table 3 shows the video output mode for each playing source.
VM9226BT SETTINGS MENU To access system settings, touch the button on the screen to enter the SETTINGS MENU. The GENERAL Sub-menu appears highlighted in blue. Accessing Menu Items Touch the sub-menu name to select a sub-menu (Language, Audio, RDS, etc.). The features available for adjustment under the highlighted sub-menu option will appear in the left of the screen. Adjusting a Feature 1. T ouch an item on the touchscreen to select the feature to be adjusted.
VM9226BT General Sub-menu Features Setting Options Function Tuner Region USA • • • • AM Frequency Spacing - 10 kHz AM Frequency Band - 530 kHz ~ 1720 kHz FM Frequency Spacing - 200 kHz FM Frequency Band - 87.5 MHz ~ 107.9 MHz S.Amer1 • • • • AM Frequency Spacing - 10 kHz AM Frequency Band - 530 kHz ~ 1720 kHz FM Frequency Spacing - 100 kHz FM Frequency Band - 87.5 MHz ~ 108.
VM9226BT Setting Options Function Clock (HH:MM) Clock appears in the top right corner of the screen during certain operations. NOTE: The AM/PM indication will change as you continue to adjust the hour past 12. Beep Off No beep sounds. On When turned on, an audible beep tone confirms each function selection. TsCal Yes Press to access the touch screen calibration function. Wallpaper Engine Button Allows the user to select a screen background.
VM9226BT Rating Sub-menu Features The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is unlocked. Once set up, the parental lock is released only by entering the correct password. Once the password is entered, rating is available for setup. Setting Options Function Set Password ____ Enter a 4-digit password to activate the “Rating” feature Parental Ctrl 1.
VM9226BT Audio Sub-menu Features Setting Options Function DRC Off Employ the Dynamic Range Control for better playback for low volumes. On Loudness Off LO Select low frequency boost only or high and low frequency boost. HI/LO Subwoofer Off Turns the subwoofer output on or off. On Sub Filter 80 Hz 120 Hz 160 Hz BASS Q 1.0 1.25 Select a crossover frequency to set a cut-off frequency for the subwoofer’s LPF (low-pass filter).
VM9226BT Setting Options Function Level 0 to 6 Default level is 3 (0dB reference) 0 = (-6dB) 1 = (-4dB) 2 = (-2dB) 3 = (0dB) 4 = (+2dB) 5 = (+4dB) 6 = (+6dB) Hardware Sub-menu Features Setting Options Function Color Select White This feature allows the user to select eight predefined LED colors for the front panel button illumination.
VM9226BT Setting Options Function Camera In Normal Reverse the camera image as if looking through a rear-view mirror. Mirror NSTC Video Input (Input circuitry auto detects the video signal from the PAL Aux In source). Auto The color signals are output in the standard NTSC format. The color signals are output in the standard PAL format. The color signal output is switched automatically based on the current video input signal - NTSC or PAL.
VM9226BT TUNER OPERATION Tuner TFT Display Menu Page 1 Menu Page 2 RADIO: Touch to view the SOURCE MENU and select a new playback source. Current radio band indicator. Stereo broadcasting indicator. Strong local signal broadcasting indicator. Equalizer setting indicato.r EQ: Touch for quick access to Equalizer level settings. Clock Program Information Info: This indicator provides three types of information: PS, RT, and PTY.
VM9226BT 15. AS: Touch to automatically store stations. 16. PTY: Touch to activate the program type related search function. 17. SCAN: Touch to scan all stations available, stopping for 5 seconds at each and continuing until a station is selected. 18. SAVE: Touch to display view screen used to enter current channel into preset memory. 19. BAND: Touch to change between AM/FM bands. 20. DIRECT ENTRY: Touch to access the direct entry screen. 21.
VM9226BT Direct Tuning To enter a radio station directly, touch DIRECT ENTRY to display the direct entry menu. Enter the desired radio station frequency using the on-screen number pad. If you wish to delete an entry number touch . Press OK to tune to the selected station and touch the OK button. To exit the screen without changing the station, touch X. Using Preset Stations Six numbered preset buttons store and recall stations for each band.
VM9226BT Recalling a Station 1. Select a band (if needed). 2. Touch an on-screen preset button to select the corresponding stored station. Auto Store (AS) To select six strong stations and store them in the current band: 1. Select a band (if needed). 2. Touch AS on the on-screen controls to activate the Auto Store function. The new stations replace stations already stored in that band.
VM9226BT DVD/VCD VIDEO OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays: Warning!!! It is illegal to view video while driving or operating a motor vehicle. Set parking brake to view video. Menu Page 1 Menu Page 2 Controlling Playback To access the on-screen controls, touch the bottom 1/3 of the screen while a DVD is playing.
VM9226BT 1. Touch to advance to the next chapter on the DVD. 2. Touch to see the second page of DVD controls. 3. Touch to select a chapter/track directly using the on-screen display direct entry menu display. 4. Touch to stop DVD playback. 5. Sub: Touch during playback to select the subtitle language if the disc is recorded in multiple languages. Each time the icon is touched a different subtitle language is selected. The subtitle function can also be turned on or off. 6.
VM9226BT Inserting a Disc Upon inserting a DVD disc, DVD mode is entered and disc play begins. NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit code must be entered and/or the disc must be authorized (see “Rating Sub-menu Features”). You cannot insert a disc if there is already a disc in the unit or if the power is off. NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed.
VM9226BT Sectional Repeat Function (A-B) Use the A-B function to define a specific area of a disc to repeat. • Touch A-B on the second page of DVD on-screen controls to set the start point (A) of the repeated section. • Touch A-B again once you reach the desired end point (B) of the repeated section. The selected portion of the DVD will now repeat continuously. • Touch A-B a third time to cancel the A-B section setting and stop repeat play.
VM9226BT Multi-Language Discs (DVD Only) Changing Audio Language If you are watching a disc recorded in multiple languages, touch AUDIO on the second page of DVD on-screen controls to choose a language. Each time the icon is touched the language will change. Changing Subtitle Language If you are watching a disc recorded in multiple languages with subtitles, touch Sub on the second page of DVD on-screen controls to choose the language in which you would like the subtitles to appear.
VM9226BT General Disc Information Table 4: Disc Properties Symbol 12cm Disc Properties Max Play Time Single side single layer (DVD-5) Single side double layer (DVD-9) Double side single layer (DVD-10) Double side double layer (DVD-18) (MPEG 2 Method) 133 minutes 242 minutes 266 minutes 484 minutes Single side single layer (VCD) (MPEG 1 Method) 74 minutes Single side single layer 74 minutes Table 5: Disc Symbols Symbol Meaning Number of voice languages recorded.
VM9226BT DVD/CD AUDIO OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and CD operation. Please see the DVD/Disc Video Operation section for information about these topics. Media Requirements The VM9226BT will play music or other audio files from the following disc media: • CD-DA • CD-R/RW • DVD • DVD+R/RW • DVD-R/RW Upon inserting a disc, the disc and track title (if available), along with the track number and playing time appear on the screen.
VM9226BT ISC: Touch to view the SOURCE MENU and select a new playback source. D Repeat Play Indicator - This indicator is lit when the repeat mode is active. Random Play Indicator - This indicator is lit when the random mode is active. Equalizer setting indicator. EQ : Touch for quick access to the Equalizer level settings menu. Toggle icon ( ): Touch to toggle between menu page 1 and menu page 2. 7. Stop ( ) icon: Touch to stop playback. 8. Next ( ) icon: Touch to play the next track. 9.
VM9226BT Playlist Screen The Playlist screen allows you to directly search for music on your disc. • Touch a track title (if available) or track number to begin playback of that track. • Touch to view the previous playlist page. Touch to view the next playlist page.
VM9226BT Controlling Playback Inserting a Disc Upon inserting a CD, disc play begins. You cannot insert a disc if there is already a disc in the unit or if the power is off. Ejecting a Disc Press the button on the front of the unit to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.
VM9226BT MP3/WMA OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and MP3 operation. Please see the DVD/Disc Video Operation section for information about these topics. Media and File Requirements This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make sure it is formatted using the full method and not the quick method to prevent illegal disc operation.
VM9226BT For example, a medium with the following folder/file hierarchy is subject to Folder Search, File Search or Folder Select, as shown below. The VM9226BT player will only recognize three folder levels and does not display folders containing only other folders. In the example above, the unit will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any tracks directly. Folder 5 is not recognized at all since it is at the fourth level.
VM9226BT MP3/WMA TFT Display The on-screen indicators and touch key areas for MP3/WMA playback are outlined below.
VM9226BT ISC: Touch to view the SOURCE MENU and select a new playback source. D Repeat Play Indicator - This indicator is lit when the repeat mode is active. Random Play Indicator - This indicator is lit when the random mode is active. Equalizer setting indicator EQ : Touch for quick access to the Equalizer level settings menu. Toggle icon ( ): Touch to toggle between menu page 1 and menu page 2. 7. Stop ( ) icon: Touch to stop MP3/WMA playback. 8. Next ( ) icon: Touch to play the next track. 9.
VM9226BT Playlist Screen The Playlist screen allows you to directly search for music, video or photo files stored on your MP3 disc/USB device. • Touch a folder to view the contents of the directory or touch a track title/file name to begin playback of that file. • Touch to view the previous playlist page. Touch to view the next playlist page. • Touch to return to menu page 1. Search Playlist by File Type 1. Touch the MUSIC icon. 2. T ouch “MUSIC,” “PHOTO” or “VIDEO”.
VM9226BT Controlling Playback Inserting a Disc Upon inserting a MP3/WMA disc, disc play begins. You cannot insert a disc if there is already a disc in the unit or if the power is off. Ejecting a Disc Press the button on the front of the unit to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.
VM9226BT iPod®/iPhone® OPERATION ® NOTE: Be sure your iPod has the latest Apple firmware installed to avoid connectivity issues. Accessing iPod® Mode This unit is Made for iPod® and iPhone®. You can control your iPod® via touch screen to access Playlist, Artist, Albums, Songs, etc.
VM9226BT The Search Screen allows you to search for music or video files stored in your iPod®/ iPhone®. Touch the Music list box to search for music grouped by playlists, artists, albums, songs, genres, composer or podcast. Touch the Video list box to search for videos grouped by movie, music videos, TV shows, video podcasts, rentals and video playlists. Photos are displayed by using the iPod®/iPhone® to control and select photos.
VM9226BT Indicators/Controls The on-screen indicators and touch key areas for iPod® playback are outlined below. 1. iPod: Touch to view the SOURCE MENU and select a new playback source. 2. ll Indicates whether media is playing or paused. 3. Rock: Indicates the current equalizer setting. 4. EQ: Touch for quick access to Equalizer level settings. 5. Clock 6. Repeat ( ) icon: Indicates the repeat function is enabled. 7. Random ( ) icon: Indicates the random function is enabled. 8.
VM9226BT Controlling your iPod® Touch the MENU button to access the main iPod® menu. Use the touchscreen to navigate the iPod® menus. Direct Track Entry To select a track directly, touch the icon to display the direct entry menu. Touch to select a chapter/track directly using the direct entry menu by entering the desired track number. Touch the “check mark” to enter your selection. To exit the screen without changing the file, touch the X. To clear your entry and start over, touch the back arrow.
VM9226BT PANDORA RADIO OPERATION Pandora Radio is available via your iPhone® (data usage will occur) or iPod® touch (Wi-Fi). NOTE: For basic iPod®/ iPhone® connectivity, you can use the white 30-pin to USB iPod cable that came with your Apple device . For iPod® video or photo playback, you must purchase the jLink-USB cable. NOTE: The Pandora app must be installed on your iPhone®/iPod® touch.
VM9226BT 13. Thumbs Down Icon: Press this icon to tell Pandora to not play this track. Pandora will skip to the next track. If the skip limit has been reached, Pandora will continue to play but your feedback will be recorded. 14. List icon: Press this icon to access the Station List Screen. Bookmark Submenu • Touch the Bookmark this Track icon to bookmark a track. • Touch the Bookmark this Artist icon to bookmark an artist. • Touch the Cancel icon to return to the Pandora Radio screen.
VM9226BT To Launch/Stop Pandora Radio 1. L aunch the Pandora app on your iPhone. The Pandora icon appears on the Main Menu Screen. 2. Touch the Pandora icon. The Pandora Screen appears. 3. Touch the icon to begin playback or the icon to pause playback. 4. Touch the iPod icon to exit Pandora and return to the iPod Screen. 5. Touch the Pandora icon to return to Pandora Radio.
VM9226BT BLUETOOTH OPERATION Bluetooth® was launched by a special interest group (SIG) comprised of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM in 1998, and it is currently developed by nearly 2,000 companies worldwide. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Audiovox Corporation is under license. Other trademarks and trade names are those of their respective owners.
VM9226BT Bluetooth User Interface The on-screen indicators and touch key areas for Bluetooth® functions are outlined below. BT: Touch to view the SOURCE MENU and select a new playback source. ser: Indicates the current equalizer setting. U EQ: Touch for quick access to Equalizer level settings. Clock / : Indicates whether the unit is connected/disconnected with a Bluetooth®device. 6. Pair: Touch to initiate the pairing process with a Bluetooth®device. 7.
VM9226BT Hands Free Profile (HFP) To use a mobile phone with this unit, it is necessary to first establish a connection using Bluetooth® wireless technology. The connection is normally established using Hands Free Profile (HFP), which gives you full control of functions available on the mobile phone source. However, depending on your mobile phone, the connection may be made using Head Set Profile (HSP), making some functions unavailable. This is a limitation of your mobile phone, not theVM9226BT.
VM9226BT 10. A prompt to pair or bond should appear on your mobile phone. Accept the request and initiate the process. NOTE: Some mobile phones require a “pass key” or pairing code to connect. If your phone requires a pass key or pairing code, you will need to enter this number. The default pairing code for many mobile phones is “0000”. The default code for the unit is “1234”. 11. A prompt to enter a PIN number or passkey for the unit should appear. The default passkey for the unit is “1234”. 12.
VM9226BT Answering an Incoming Call To answer an incoming call touch the icon. For best reception, speak loudly and clearly into the microphone. To end the conversation, touch the icon. Rejecting an Incoming Call Press the Transfer Call icon to reject an incoming call. The call will revert to your mobile phone and be left for voice mail.
VM9226BT Call Transfer While talking, to transfer audio from the unit back to the mobile phone, touch the Transfer Call icon. You can only transfer a call after it has been answered. Pressing the Transfer Call icon again will return the audio from the mobile phone to the unit.
VM9226BT While listening to audio the following functions are available: 1. Pause/Play ( ) icon: Touch to pause playback. Touch again to resume playback. 2. Previous ( ) icon: Touch to play the previous track. 3. Next ( ) icon: Touch to play the next track. 4. Touch the Stop ( ) icon to stop playback . Functionality varies depending on the profile used: •A2DP: Stream audio from your Bluetooth® compatible audio player and listen to the music through the unit. •AVRCP: Play back, pause, select songs, etc.
VM9226BT SiriusXM® RADIO OPERATION SiriusXM User Interface The on-screen indicators and touch key areas for SiriusXM® functions are outlined below. Menu Page 1 Menu Page 2 1. S XM icon: Touch to view the SOURCE MENU and select a new playback source. 2. Band indicator - Displays SiriusXM® radio band currently selected. 3. Equalizer setting indicator: Displays the current equalizer preset setting. 4. EQ : Touch for quick access to the Equalizer level settings menu. 5.
VM9226BT 14. Options icon: Touch to go to the SXM Parental Lock Menu. 15. Mem icon: Touch to display screen used to enter current channel into preset memory. 16. Scan icon: Touch to scan to the next available channel. The tuner will pause for approximately five seconds at that channel. Touch scan again to listen to that channel. If scan is not touched, the tuner will automatically seek the next channel. 17. Band icon: Only six preset channels will display at a time.
VM9226BT Switching to SiriusXM® Radio • Touch the top left corner of the screen (the radio box) to view the SOURCE MENU. Touch the “SiriusXM” icon. • Press the SRC button on the front panel to switch to the SXM source. Selecting the SiriusXM® Band Touch the Band icon on the screen to change between the following bands: Band1, Band2, and Band3. Seek Tuning • To seek the next higher channel, touch the • To seek the next lower channel, touch the icon. icon.
VM9226BT Using Preset Stations Six numbered preset buttons store and recall channels for each band. All six stored channels for the current band appear on the screen. Storing a Channel 1. Select a band (if needed), then select a channel. 2. Touch the on-screen Mem icon to access the Preset Screen. 3. 4. T ouch the preset number (P1 through P6) in which you would like to store the current channel (or touch Exit to cancel and close the menu). The channel is displayed at the top of the menu.
VM9226BT Searching for a Channel Search by Channel To search by channel: 1. On the SirusXM® menu page, touch the Category/Channel icon (if needed) to select Channel. 2. Touch List to go to the Channel Screen. The following screen appears. 3. Touch a channel to tune to that channel. Search by Category Categories group music by type such as jazz, rock, classical, etc. To search by category: 1. On the SirusXM® menu page, touch the Category/Channel icon (if needed) to select Category. 2.
VM9226BT Parental Lock Options The SXM Parental Lock Menu allows you to block access to individual channels or mature channels. Lock Current Channel: Individual channels may be locked. The Lock Current Channel option allows you the ability to lock a certain channel. Locking does not allow the SiriusXM® tuner to access that channel’s audio or metadata. To lock a channel: 1. Tune to a channel. 2. Touch the Options icon to enter the SXM Parental Lock Menu. 3.
VM9226BT password, use this code to change a password. Unlock All Channels: The Unlock All Channels option unlocks all (individual and mature) locked channels. To unlock all channels: 1. Tune to a channel that is not locked (for example Channel 1, preview channel). 2. Touch the Options icon to enter the SXM Parental Lock Menu. The Unlock All Channels choice will be enabled. 3. Touch the blue box adjacent to Unlock All Channels. 4. Enter your password using the on-screen number pad. 5.
VM9226BT REAR CAMERA OPERATION This unit is “camera ready.” Before accessing any camera features, you must install a rear video camera. When the camera is not installed and the function is accessed by the gear selector being placed in reverse or by the unit’s menu, the message “VIDEO NOT DETECTED” will appear, indicating the function is not available. When the camera is installed, the rear view image of what is behind the vehicle will appear when the vehicle is placed in reverse gear.
VM9226BT TROUBLESHOOTING Table 6: Troubleshooting Problem Cause Corrective Action Radio Fuse blown Install new fuse with correct rating Car battery fuse blown Install new fuse with correct rating Illegal operation Press the RESET button located in the bottom right corner of the front panel Improper audio output connection Check wiring and correct Volume set too low Increase volume level Improper “MUTE” connection Review wiring diagram and check “MUTE” connection Speakers damaged Replace sp
VM9226BT Problem Cause Corrective Action Incorrect connection to parking brake wire Check wiring and correct Parking brake is not engage Stop vehicle in safe place and apply parking brake Flashing image or interference appears on screen DVD is not compatible with current TV system settings Change setup to accommodate disc Improper video signal connections Check wiring and correct Prolonged image or improper height/ width ratio display Improper aspect ratio setup Use correct aspect ratio settin
VM9226BT Problem Cause Corrective Action Disc does not play back Disc is warped or scratched Use disc in good condition Disc is dirty or wet Clean disc with soft cloth Laser pickup is dirty Clean laser pickup with cleaning disc Incompatible disc is used Use compatible disc Disc rating exceeds Parental Lock rating limit Change Parental Lock settings to lower restriction Disc region code is not compatible with unit Use disc with proper region code Disc is inserted upside down Insert disc with
VM9226BT Disc Error Messages Message Displayed Cause Loading Disc is being read No Disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side up Disc not present in loading compartment Insert disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side up Bad Disc Unknown disc Disc format is not compatible with this unit Region Error DVD is not compatible with region code of unit Error Illegal mechanism operation Corre
VM9226BT Care and Maintenance 1. U se only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and non-neutral detergent (such as alcohol) may result in scratching or discoloration. 2. Do not get water or cleaning fluids on the unit. 3. If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs, allow the unit to cool before operating the player again. 4.
VM9226BT SPECIFICATIONS DVD/CD Player Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RW Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, Xvid, AVI, MPEG 1/2 Signal to Noise Ratio: >95dBA Dynamic Range: >95dB Frequency Response: 20Hz to 20 kHz, -3dB Channel Separation: > 60dB @ 1 kHz D/A Converter: High performance 24-bit / 192 kHz sample rate, Multi-Bit SigmaDelta Modulator Video Format: NTSC, PAL (auto-detection) Output: 1Vp-p (75-ohm) Input: 1Vp-p (75-ohm) FM Tuner Tuning R
VM9226BT Operating Temperature: -20C ~ 65C Fuse: 15-amp, mini ATO type DIN chassis dimensions: 7” X 7” X 4” (178mm x 178mm x 100mm) CEA Power Ratings Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference (Reference: 1 Watt, 4-Ohms) Frequency Response: 20 Hz - 20 kHz, -3dB. (Aux Input used as reference input) Reference Supply Voltage: 14.
VM9226BT NOTES 75
VM9226BT Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.jensenmobile.