VM9312 Instruction Manual
CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9312 Mobile Multimedia Receiver for maximum enjoyment. Preparation............................................................................................................................ 1 Installation ............................................................
ii
VM9312 PREPARATION Congratulations on your purchase of the Jensen VM9312 Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9312 installed by a reputable installation shop.
VM9312 INSTALLATION Pre-installation 1. Press the metal levers on both sides to remove the halfsleeve from the radio. PREPARE RADIO FINAL INSTALLATION CAUTION! Be careful not to damage the car wiring. 3. 4 5 Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve. 1 Wiring Complete wiring as illustrated in the wiring diagram on page 3. Once the wiring is complete, reconnect the battery negative terminal.
VM9312 WIRING DIAGRAM the MediaLink and Satellite Connections diagram for more information * See about connecting a satellite receiver and an iPod (through the MediaLink). MediaLink Bus SAT Radio * Satellite Receiver Connections WHITE BLUE SAT L SUB.
VM9312 To Head Unit MEDIALINK AND SATELLITE CONNECTIONS SAT Radio SAT L SAT R *SAT Cable Kit: JXMC or XMDJEN100 (sold separately) MediaLink **XM or Sirius satellite tuner (sold separately) 3.
VM9312 CONTROLS AND INDICATORS Button Operation 1. OPEN Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 4 3 2 1 BAND AS/PS DISP OPEN TILT PICTURE WIDE CLOSE 2. WIDE/DISP Press to adjust the display aspect of the picture to one of two settings: Full or Normal. With the monitor closed, press the DISP button to cycle through information available on the LCD screen. 3.
VM9312 CONTROLS AND INDICATORS 9. IR Remote Control Receiver 10. ( ) 4 3 2 1 BAND AS/PS DISP OPEN TILT PICTURE WIDE CLOSE DVD Mode: Press once to play back the previous chapter/ track. TUNER Mode: Press once to auto-search for the previous available radio station. MENU Mode: Press once to move the cursor to the left. 11. ( ) DVD Mode: Press once for slow forward/slow reverse. TUNER Mode: Press to go down one frequency step. MENU Mode: Press once to move the cursor down. 12.
VM9312 REMOTE CONTROL 8 3 35 4 1 5 2 10 9 MUSIC PHOTOS 13 VIDEO iPod 6 7 DISP 26 28 25 27 WIDE 11 15 TILT 12 14 16 34 PRESET 33 20 18 MENU 19 17 32 22 23 21 24 SLOW 29 SETUP 31 CLEAR 30 NOTE: Your remote control may differ slightly from the one pictured here. The above diagram is for illustrative purposes only.
VM9312 Table 1: Remote Control Functions Button Name Function Ref# DVD VCD MENU 1 Enters the main menu of the disc Turns on/off PBC when playing VCD TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title TUNER CD/MP3 SATELLITE Displays diagnostics screen iPod Selects Photo mode Selects Music mode MUTE 3 Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/
VM9312 Table 1: Remote Control Functions Button Name OPEN/ CLOSE Function Ref# 25 DVD VCD Opens/closes the TFT monitor Opens/closes the TFT monitor TUNER Opens/closes the TFT monitor CD/MP3 SATELLITE iPod Opens/closes the TFT monitor Opens/closes the TFT monitor Opens/Closes the TFT monitor 26 Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle 27 Increases monitor t
VM9312 USING THE TFT MONITOR Open/Close TFT Monitor Aspect Ratio Parking Brake Open TFT Monitor Press the DISP button (28) on the remote control or DISP/ WIDE button (2) on the monitor to adjust the aspect ratio as follows: Parking Brake Inhibit Press the OPEN button (1) on the front panel or press the ( ) button (25) on the remote control to activate the mechanism that moves the display panel into the viewing position. FULL The entire screen is extended horizontally to the aspect ratio of 16 to 9.
VM9312 Table 3: Monitor Protective Measures Obstruction Self Protection OPEN Button Pressed Power Reconnected Monitor loading out vertically Unit stops at obstruction point Monitor swivels back to the unit Monitor swivels back to the unit Monitor loading in vertically Unit stops at obstruction point Monitor swivels back to the unit Monitor swivels back to the unit After the protective procedure is executed, normal operation is resumed by pressing the OPEN button (1) or disconnecting and reconnec
VM9312 OPERATING INSTRUCTIONS Power On / Off Audio Control Menu System Reset Press the /SRC button (6) on the unit (or the button (4) on the remote control) to turn the unit on. The buttons on the front of the unit light up and the current mode status appears in the LCD (7). You can also turn on the unit by pressing the OPEN button (1) and opening the TFT screen.
VM9312 SETUP MENU To access system settings, press the SETUP button (31) on 3. the remote control or touch the button on the screen to enter the “SETUP” menu. The “GENERAL” sub-menu appears highlighted in blue. 4. RADIO Select a new value by using the touchscreen or pressing the >> or << buttons (14, 22) on the remote control or the /\ or V buttons (18, 19) on the joystick. Use the touchscreen or press the >/|| button (18) on the remote control or press the joystick button (13) to confirm setup.
VM9312 Setting Sub.W Phase Options Function 0 Subwoofer output IN phase 180 Subwoofer output OUT OF phase NOTE: Depending on your installation, reversing the subwoofer phase may increase Bass output. Sub Filter 80Hz 100Hz 120Hz Selecting a crossover frequency sets a cut-off frequency of the subwoofer's LPF (lowpass filter) and the “SMALL” speakers' HPF (high-pass filter). The Crossover frequency setting has no effect if the subwoofer is set to “OFF” and any other speaker is set to “LARGE”.
VM9312 TUNER OPERATION Tuner TFT Display 8 1 17 RADIO 4 FM-1 2 24 25 3 01:02 PM P1 87.5 MHz ST E Q 10 5 LOC P1 87.5 MHz P2 90.1 MHz P3 98.1 MHz P4 106.1 MHz P5 107.9 MHz P6 102.9 MHz PTY RDS BAND 6 20. : Touch to view the SETUP menu 21. PS (Preview Scan): Touch to scan all stations available, stopping for 5 seconds at each and continuing until a station is selected 22. LOC: Touch to tune to strong local stations 23.
VM9312 3. Touch the preset number in which you would like to store the current station (or press EXIT to cancel and close the menu). The preset number and station appears highlighted. Recalling a Station 1. Select a band (if needed). 2. Touch an on-screen preset button (6) to select the corresponding stored station. P1 87.5 MHz P2 90.1 MHz P3 98.1 MHz P4 106.1 MHz P5 107.9 MHz P6 102.9 MHz Auto Store (AS) To select six strong stations and store them in the current band: 1. 2.
VM9312 SATELLITE RADIO OPERATION Listeners can subscribe to XM® Radio on the Web by visiting www.xmradio.com, or by calling (800) 967-2346. Customers should have their Radio ID ready (see “Displaying the Identification (ID) Code”). Customers can receive a limited number of free-to-air channels without activation. Listeners can subscribe to Sirius® Radio on the Web by visiting www.sirius.com, or by calling (888) 539-SIRIUS.
VM9312 SAT E Q SAT1 XM Preview 01:02 CH001 Preview ######## 001 XM Preview CH 004 The 40s 005 The 50s CG 006 The 60s CAT 007 The 70s Title: www.xmradio.com • • • • • SCN MEM DIAG While in Search Mode, to switch between Channel and Category search modes, press the CH or CAT buttons in the touch screen. Use the scroll bar and arrows on the touch screen to view the next/previous page of stations. Each page contains six channels to select from.
VM9312 DVD/VCD VIDEO OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if applicable, will operate normally. Using the Touch-Screen Controls Slow Motion Playback The touch key areas for DVD playback are outlined below.
VM9312 • NOTE: When a VCD is playing with PBC turned “On”, activating random playback automatically turns PBC off. For VCD mode, press the GOTO button to choose between Track Search, Disc Search and Exit. VCD Track Search Accessing the DVD Menu Time – Go to specific time in the current track Press the MENU button (1) on the remote control to recall the main DVD menu.
VM9312 screen, including the media playing and current playback time. DVD Playback Information The following information is displayed at the top of the screen during DVD playback: Table 6: Disc Symbols Symbol Meaning Number of voice languages recorded. The number inside the icon indicates the number languages on the disc (maximum of 8). Number of subtitle languages available on the disc (maximum of 32). • • • • T : 5/8 – “5 / 8" indicates the fifth of 8 titles on the DVD is currently playing.
VM9312 DVD/CD AUDIO OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and CD operation. Please see the DVD/Disc Video Operation section for information about these topics. The VM9312 will play music or other audio files from the following disc media: • • • • • CD-DA CD-R/RW DVD DVD+R/RW DVD-R/RW 14. Touch to access the direct entry screen 15. : Touch to view the SETUP menu 16. Touch for quick access to Equalizer level settings 17.
VM9312 MP3/WMA OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and MP3 operation. Please see the DVD/Disc Video Operation section for information about these topics. Media and File Requirements This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make sure it is formatted using the full method and not the quick method to prevent illegal disc operation.
VM9312 Controlling Playback Playing MP3/WMA Files After inserting a MP3/WMA disc, files will play in the sequence of the “Root’ directory. NOTE: When burning MP3 / WMA files onto a DVD disc, use the 2X or 4X burning option, if available. This slower burning speed will help eliminate buffer errors and increase disc reading reliability. Also, use folders when burning large numbers of songs / files to a disc for easy music navigation. Select the "Disc at Once" option and close your disc.
VM9312 IPOD OPERATION NOTE: Be sure your iPod has the latest Apple firmware installed to avoid connectivity issues. Accessing iPod Mode Controlling your iPod Direct Track Entry Touch the MENU button to access the main iPod menu. The following touch screen icons and remote control buttons are used to access the iPod menus: To select a track directly, touch the button on screen control to display the direct entry menu.
VM9312 TROUBLESHOOTING Table 7: Troubleshooting Problem Cause Corrective Action GENERAL Unit will not power on Remote control does not function No/low audio output Radio Fuse blown Install new fuse with correct rating Car battery fuse blown Install new fuse with correct rating Illegal operation Press the RESET button located in the bottom right corner of the front panel Battery depleted Replace battery with new one Battery installed incorrectly Remove battery and install correctly Improper a
VM9312 Table 7: Troubleshooting Problem Disc does not play back Cause Corrective Action Disc is warped or scratched Use disc in good condition Disc is dirty or wet Clean disc with soft cloth Laser pickup is dirty Clean laser pickup with cleaning disc Incompatible disc is used Use compatible disc Disc rating exceeds Parental Lock rating limit Change Parental Lock settings to lower restriction Disc region code is not compatible with unit Use disc with proper region code Disc is inserted upside
VM9312 Table 8: Error Messages Message Displayed Error Cause Corrective Action Illegal mechanism operation Press EJECT key for 5 seconds to reset loading mechanism Care and Maintenance 1. 2. 3. 4. 5. 6. 7. 8. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and nonneutral detergent (such as alcohol) may result in scratching or discoloration. Do not get water or cleaning fluids on the unit.
VM9312 SPECIFICATIONS DVD/CD Player Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RW Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, AVI, MPEG1 / 2, XviD, DivX and Kodak picture CD (JPEG).
VM9312 30
Limited Warranty DO NOT RETURN THIS PRODUCT TO THE STORE CD or Multimedia Radios/Headunits Audiovox Electronics Corporation (“the Company”) is committed to quality and customer service, and are pleased to offer you this Warranty. Please read it thoroughly and contact the Company at 1-800323-4815 with any questions. Who is covered? The Company extends this warranty to the original retail purchaser of products purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or Canada.
Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.jensen.com © 2007 Audiovox Ver.
