VR209TP TOUCH PANEL MOBILE AUDIO AND OBSERVATION SYSTEM Installation and Operation Manual
VR209TP SAFETY INFORMATION When Driving Keep the volume level Iow enough to be aware of the road and traffic conditions. Protect from Water Do not expose the product to water, as this can cause electrical shorts, fire or other damage. Protect from High Temperatures Exposure to direct sunlight for an extended period of time can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback. Do not mount radio within close proximity of engine compartment.
VR209TP DISC NOTES Depending on the recording status, conditions of the disc, and the equipment used for recording, some CD-Rs/CD-RWs may not play on this unit. For more reliable playback, please adhere to the following recommendations: • • • NOTE: A disc may become scratched (although not enough to make it unusable) depending on how you handle it and other conditions in the usage environment. These scratches are not an indication of a problem with the player.
VR209TP INSTALLATION Before You Begin 1. Disconnect Battery Before you begin, always disconnect the battery negative terminal. 2. Remove Transport Screws and discard. Important Notes • • • • • • Before final installation, test the wiring connections to make sure the unit is connected properly and the system works. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
VR209TP WIRING 5
VR209TP Recommended Camera Installation Configurations 6
VR209TP BASIC OPERATION Camera (CAM) 8 1 • • 9 Audio 2 3 10 4 11 5 12 Press the CAM button (5) to access camera mode. Press and Hold to enter the “Camera Setup” menu. See “Camera Operation” on page 21. • • Press the AUDIO button (4) to access Audio Mode and select a source for playback. Press and hold the AUDIO button to enter the “Audio Setup” menu. See “Source Select Menu” on page 10.
VR209TP Auxiliary Input To access an auxiliary device: 1. Connect the portable audio player to the AUX IN connector on the front panel (12) or to the AUX IN cables on the back of the radio. 2. Touch the AUDIO button on the left side of the screen to select AUX IN mode. 3. Touch the “F.AUX” (front AUX) or “R.AUX” (rear AUX) button to select front or rear AUX in. Video output is available for the Rear Aux input through video cables at the back of the unit.
VR209TP USER SETTINGS MENU Press the MENU button (3) to access the User Settings Menu. Table 2: Audio Setup Menu Options Setting Adjustable Range NOTES: The Bass and Treble levels are only adjustable when EQ is set to "Off" mode. The Loud function compensates for deficiencies in sound ranges at low levels. Camera Setup Menu NOTE: You can also press and hold the CAM button (5) on the front panel to enter the Camera Setup menu.
VR209TP System Setup Menu Table 3: Camera Setup Menu Options Setting Options Trigger Delay The following “System Setup” options can be adjusted: Function 1 SEC Table 5: System Setup Menu Options Set delay time for displaying camera image after trigger signal is removed. 2 SEC Setting 3 SEC Beep Tone 4 SEC (default) Radio 6 SEC USA (default) Europe MIC 1 Select microphone to be used for rear camera. Clock Format Off (default) Select "On" to restore camera factory settings.
VR209TP AM/FM/RBDS CONTROLS Select a Band 1 8 Touch the BAND button on the left side of the touch screen to change between FM and AM bands. 9 Tuning • 2 3 10 4 11 5 12 • Touch the TUNE + or TUNE - buttons on the touch screen to tune up or down in one step increments. Touch the SEEK + or SEEK - button to seek the next strong station. Preset Stations 18 FM or 12 AM numbered preset stations are listed on the touch screen and can be selected when touched.
VR209TP Automatic Store / Preset Scan (AS/PS) Automatic Store 1. Select a band (if needed). 2. Touch and hold the AS/PS button for more than three seconds to automatically select 18 strong stations for FM (12 for AM) and store them in the current band. New stations replace any stations already stored in that band. 3. After stations have been stored, the radio will enter Preset Scan and preview each stored station. 4.
VR209TP CD/MP3/WMA OPERATION Ejecting a Disc 8 1 Press the eject button (9) on the front panel to stop disc play and eject the disc. The unit must be turned on to eject the disc. After the disc is ejected, the unit automatically returns to AM/FM mode. 9 MP3 Specifications 2 3 10 4 11 5 12 • • • • • • • • 6 13 A directory that does not include an MP3 file is skipped.
VR209TP Display Modes (MP3 Discs) NOTE: Only six tracks are displayed at one time. Touch the up/down arrows to the right of the list to access additional tracks. Touch the INFO button to toggle between MP3 files/directories view and large screen format, where the artist, song title and album is displayed. Shuffle Play • • • Touch the SHUF button on the touch screen during disc play to play all tracks/files in random, shuffled order.
VR209TP USB OPERATION 1 8 NOTE: The USB button is operative only when a USB device is connected. 9 Removing a USB Device Change to another mode and then remove the USB device from the USB connector. 2 3 10 4 11 5 12 Accessing USB Mode from Another Playback Mode Touch the USB button on the right side of the touch screen to access USB mode. NOTE: After loading a USB device, files and folders are accessed in the order in which they were written to the device.
VR209TP NOTE: Only six files are displayed at one time. Touch the up/down arrows to the right of the list to access additional files. Direct File Access 1. Touch the 2. Enter the file number using the keypad in the center of the screen to directly select a file. NOTE: Touch the 3. button to make the keypad appear on the screen. button on the keypad to backspace and cancel wrong number input. Touch the ok button to play the entered file number.
VR209TP SIRIUS RADIO OPERATION Tuning a Channel 1 8 Touch the TUNE + or TUNE - buttons to tune up or down in one step increments. 9 Display Information • 2 Touch the INFO button to toggle list display in the following order: Channel Name -> Song Title -> Artist. Touch and hold the INFO button and the screen information will scroll twice and then return to the default channel display.
VR209TP Direct Channel Access 1. Touch the button to make the keypad appear on the screen. 6. Use the on-screen number pad to re-enter the new 4-digit code, and then press the ok button. 7. If the new code is correctly entered twice, “Code Saved” appears on the screen and the radio returns to SIRIUS mode. Lock a Channel 1. In Sirius mode, tune to the channel you want to lock. 2. Touch the LOCK button on screen. The keypad appears with fields for the code entry. 3.
VR209TP iPod OPERATION This unit is equipped with an iPod ready function that will allow you to control your iPod (if compatible) using the control panel buttons. The following iPod versions are supported: • • • • • • • Touch and hold the playback. or button to fast forward or fast reverse. Release to resume normal • In list view, touch the desired file name on the screen to play the file. The artist and song title is displayed in the middle of the screen.
VR209TP Play/Pause Playback • • Touch the Press the button to suspend playback. button again to resume playback. Repeat Play • • Touch the RPT button during playback to repeat play the current file. Touch RPT again to stop repeat play. Shuffle Play • • During playback, touch the SHUF button on the screen to play all files on the iPod in random order. Touch SHUF again for normal playback. Direct File Access 1. Touch the 2.
VR209TP CAMERA OPERATION Enter Camera Mode It is important to set this correctly so that the proper camera/microphone combination will be used to interrupt playback when the vehicle is backing up. Connect the cameras to the unit using camera connection cable at the back of the unit. Press the CAM key on the front control panel to access camera mode.
VR209TP REMVRCC CARD REMOTE CONTROL (SOLD SEPARATELY) • • • • • • • • • • • • • • • POWER: Powers on/off. MODE: Cycles through all available play modes (Radio, CDP, SAT, iPod, Aux). VOL /\ / \/: Adjusts volume level. AUDIO MENU: Accesses Audio and System Menu. ENTER: Enter key. TUNE /\ /TUNE \/: Changes frequency/channel by one step in AM/FM/SAT modes. P-TUNE /\ / \/: Navigate/tune to preset stations. MUTE: Mutes audio in all modes. WB: Directly accesses weatherband.
VR209TP CARE AND MAINTENANCE • • • • • Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts. Handle the product gently and carefully. Dropping it can damage circuit boards and cases, and can cause the product to work improperly. Wipe the product with a dampened cloth occasionally to keep it looking new.
VR209TP TROUBLESHOOTING Symptom No power Cause Solution The vehicle’s ignition is not on If the power supply is properly connected to the vehicle accessory terminal, switch the ignition key to “ACC”. The fuse is blown Replace the fuse. Presence of CD disc inside the player Remove the disc in the player and insert the new one. Inserting the disc in reverse direction Insert the compact disc with the label facing upward.
SPECIFICATIONS CD Signal to Noise Ratio................................................................................................... > 60dB Channel Separation ...................................................................................... More than 50 dB Frequency Response ........................................................................................40Hz - 18 kHz CD Format Compatibility .....................................................................
VR209TP ASA Electronics Corporation www.asaelectronics.com www.jensenrvdirect.com © 2009 ASA Electronics Corporation v.
