Installation

VX3022

What’s in the Box

The following items are supplied

with the VX3022:

• VX3022HeadUnit

• TrimRing

• HardwareBag

• Power/SpeakerOutputHarness

• RemoteControl

• ExternalMicrophone

• Installation / Quick Start Guide

Tools and Supplies

The following tools and supplies

are needed to install the VX3022:

• Torx type, flat-head and Philips

screwdrivers

• Wire cutters and strippers

• Tools to remove existing radio (screw

driver, socket wrench set or other

tools)

• Electrical tape

• Crimping tool

• Volt meter/test light

• Crimp connections

• 18 gauge wire for power connections

• 16 – 18 gauge speaker wire

WARNING!Neverinstallthisunitwhereoperationandviewingcouldinterferewith

safedrivingconditions.

Installation / Quick Start Guide

Complete operation manual is

online at www.jensenmobile.com

Note: There is no operation manual in this package

PAGE 1
VX3022 Installation / Quick Start Guide Complete operation manual is online at www.jensenmobile.
PAGE 2
Steering Wheel Control (SWC) Ready The recommended SWC Interface is the PAC SWI-RC steering wheel control adapter. SWI-RC installation hints: Step 1-c 1. Set "Radio Select Switch". Set the SWI-RC to position 7 - "Pioneer/Sony/Other". 2. Programming - Use the Pioneer/Sony/Other radio function mapping order for Jensen branded head units. 3. When programming the SWI-RC, if a function is not supported (or not desired), then the function MUST be skipped as per the PAC SWI-RC instructions. 4.
PAGE 3
Wiring Diagram CAUTION! IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or have the installation handled by an experienced technician. Need Help? For technical assistance, call the Jensen customer support line at 1-800-323-4815. Red Red Radio Ant.
PAGE 4
QUICK START GUIDE Turning the Unit ON or OFF Press the front panel Power/Menu button [ / SRC ] to turn the unit ON. To turn the unit OFF, press and hold the front panel Power/Menu button [ / SRC ] for 2 seconds. Selecting an Audio/Video Source, BT or Backup Camera To access an Audio/Video source: 1. Momentarily press the front panel Power/Menu button or touch the Menu icon located in the upper left corner of the display to view the Main Menu Screen. MENU Button 2.