User manual
Table Of Contents
- FEATURES
- CONTROLS AND INDICATORS
- REMOTE CONTROL
- EXTERNAL DEVICES
- QUICK START GUIDE
- EQUALIZER CONTROL MENU
- SYSTEM SETTINGS
- DISC OPERATION
- RADIO TUNER OPERATION
- USB OPERATION
- iPod®/iPhone® OPERATION
- AV-In1/AV-In2 OPERATION
- BLUETOOTH OPERATION
- REAR CAMERA OPERATION
- STEERING WHEEL CONTROLS (SWC) OPERATION
- PANDORA RADIO OPERATION
- SiriusXM® RADIO OPERATION
- CARE AND MAINTENANCE
- SPECIFICATIONS
- NOTES
- Blank Page
- Blank Page
- Blank Page
- Blank Page
- Blank Page
- Blank Page
- Blank Page
- Blank Page
61
VX4024
8. Touch the “Pair” icon on the unit’s Bluetooth user interface screen.
9. A prompt to pair should appear on your mobile phone. Accept the request
and initiate the process.
NOTE: Some mobile phones require a “pass key” or pairing code to
connect. If your phone requires a pass key or pairing code, you will need
to enter this number. The default pairing code for the VX4024 is
"5309".
10. A prompt to enter a PIN number or passkey for the unit should appear. The
default passkey for the unit is “5309”.
11. At this point a prompt stating pairing successful should appear. Another
prompt should appear asking connect to the unit, Yes or NO. Touch Yes. The
mobile phone and the unit should connect. The mobile phone should display
a message similar to “Device Connected” and the mobile phone and the unit
are now connected. VX4024 will appear on the mobile phone list of devices.
Managing Incoming Calls
When connected to a Bluetooth mobile phone, the unit will mute audio output,
pause CD play, and change to the Bluetooth screen below when a call is received.
The incoming phone number or assigned name for that number will appear on
the screen. An audible tone will sound from the unit and a graphic display will
appear on the front panel.
Bluetooth Incoming Call Screen
1.
31
icon: Touch to answer an incoming call.
2. icon: Touch to end an incoming call.