Installation

What’s in the Box

The

following items are supplied

with

the VX4025:

• VX4025HeadUnit

• TrimRing

• HardwareBag

• Power/SpeakerOutputHarness

• RemoteControl

• ExternalMicrophone

• Installation/ Quick Start Guide

Tools and Supplies

The following tools and supplies

are needed to install the VX4025:

• Torx type, flat-head and Philips

screwdrivers

• Wire cutters and strippers

• Tools to remove existing radio (screw

driver, socket wrench set or other

tools)

• Electrical tape

• Cr

imping tool

• Volt meter/test light

• Crimp connections

• 18 gauge wire for power connections

• 16 – 18 gauge speaker wire

WARNING!Neverinstallthisunitwhereoperationandviewingcouldinterferewith

safedrivingconditions.

VX4025

Installation / Quick Start Guide

Complete operation manual is

online at www.jensenmobile.com

Note: There is no operation manual in this package

PAGE 1
VX4025 Installation / Quick Start Guide Complete operation manual is online at www.jensenmobile.
PAGE 2
Steering Wheel Control (SWC) Ready The recommended SWC Interface is the PAC SWI-RC steering wheel control adapter. SWI-RC installation hints: Step 1-c 1. Set "Radio Select Switch". Set the SWI-RC to position 7 - "Pioneer/Sony/Other". 2. Programming - Use the Pioneer/Sony/Other radio function mapping order for Jensen branded head units. 3. When programming the SWI-RC, if a function is not supported (or not desired), then the function MUST be skipped as per the PAC SWI-RC instructions. 4.
PAGE 3
YELLOW RCA - REAR CAMERA BLACK DIN CABLE - SiriusXM BLACK 3.
PAGE 4
QUICK START GUIDE Turning the Unit ON or OFF Press the front panel volume knob to turn the unit ON. Press and hold the volume knob > 1 second to turn the unit OFF. Selecting an Audio/Video Source, Phone, Steering Wheel Controls, Backup Camera or Pandora To select a source: 1. Press the front panel MENU button or touch the SRC icon to view the Main Source Menu MENU Button 2. Touch the desired source icon on one of the two main menu screens.