VX7228 6.
VX7228 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove trim ring from unit. • Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve.
VX7228 INSTALLATION Wiring Diagram SiriusXM Tuner Input (SiriusXM Tuner and subscription sold separately) GREY (RED CAP) VIOLET VIOLET/BLACK Note: When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses (1) 10 amp blade-type fuse located on the back of the unit. Wiring Notes: Rear camera input A rear view camera (not included) can be used with the Camera input.
VX7228 OPERATION Control Locations 1 7 6 2 3 4 5 1 Local / Distance 5 Additional Inputs (USB, AV) 2 EQ 6 IR Remote Sensor 3 Source / Navigation 7 Reset Button 4 Power / Volume / Mute 1 2 3 4 5 6 7 8 9 20 19 18 17 16 15 14 13 12 11 10 1 Power / Mute 11 No function 2 No function 12 No function 3 Play / Pause 13 Random 4 Tune / Track Down 14 Volume Down 5 Previous 15 PTT 6 EQ 16 Volume Up 7 Repeat 17 Tune / Track Up 8 Display 18 Band 9 No function 19 AS/PS Source
VX7228 OPERATION General Operation Power On/Off Press or any other button (except Eject) to turn the unit on. Press and hold to turn the unit off. Source Press SRC to access available input modes: Radio, Pandora, USB, Bluetooth Phone, Bluetooth Audio, SiriusXM, AV In 1, AV In 2, Camera, Navigation and Settings. USB device must be connected/inserted to appear in the mode selection string. Volume Rotate the volume knob to increase or decrease the volume level.
VX7228 OPERATION General Operation Setup Menu From the Main Menu screen, press Settings in the bottom right corner to access the Setup Menu and select from the following categories: General, Time, Display, Panel, Radio, General, Illumination, Wallpaper and Version. After accessing the desired category, press the up/down arrows to navigate all the category options and use the touch screen to adjust each option. General: • OSD Language - Select English as the language for the on-screen display.
VX7228 OPERATION General Operation Setup Menu Radio: • Dual - Select between Stereo and Mono operation. • Local - Select between Local and Distance tuning • Areea - Select between Europe, USA, American1 American 2 and OIRT. • RDS - Select On or Off. • RDS Region - Select On or Off. • PI - Select Sound or Mute. • TA - Select to turn traffic announcements On or Off. • AF - Select to turn alternative frequencies On or Off. • Radio Text - Select to turn radio text On or Off.
VX7228 OPERATION Radio Operation 2 1 3 12 4 5 Radio Operation Main Menu 1 Current Mode Indicator 2 Current Frequency 3 Source 4 Band 5 Seek Tune Down 6 Auto Store 7 Manually Tune Down 8 Seek Tune Up 9 7 8 9 10 11 Select the Radio icon from the Main Menu screen. Press to return to Main Menu screen. Displays current mode of operation. Displays current frequency. Press to view and select available sources. Press to select between 3 FM and 2 AM bands.
VX7228 OPERATION Radio Operation 13 14 15 16 Local / Distance 13 17 18 19 Press to select between Local or Distance tuning. Mono / Stereo 14 Press to select Stereo or Mono operation. Program Type 15 Press to view and select a station category, and the unit will automatically seek stations with that type of programming. Direct Entry 16 EQ 17 Press to directly enter the desired station number and begin playback of that station.
VX7228 OPERATION USB Operation 2 1 3 4 6 7 8 9 10 USB Operation Connect a USB device, and playback will begin automatically. To switch to USB mode from another mode of operation when a device is already inserted, select the USB icon from the Main Menu screen. Main Menu 1 Press to return to Main Menu screen. Current Mode Indicator 2 File Information 3 Source 4 List 5 Displays current mode of operation.
VX7228 OPERATION USB Operation 11 Repeat 11 Random 12 Direct Entry 13 EQ 14 12 13 14 15 Press to select one of the following option for Repeat play: Repeat 1, Repeat Folder, Repeat All or Repeat Off. Press to enable or disable random playback. Press to directly enter a folder (optional) and file number to begin playback of specific file.
VX7228 OPERATION iPod Operation 1 2 3 4 iPod Operation 5 6 7 8 9 10 The unit will automatically switch to iPod® mode when an iPod® or iPhone® is plugged into the front panel USB connector. iPod® mode can be accessed from the Main Menu by touching the iPod® icon (only available when an iPod® or iPhone® is connected). Note: For audio playback, the iPod® / iPhone® must be connected using the iPod® / iPhone® adapter cable that came with the iPod / iPhone device (also available separately).
VX7228 OPERATION iPod Operation 10 Repeat 10 Random 11 Direct Entry 12 EQ 13 11 12 13 14 Press to select one of the following option for Repeat play: Repeat 1, Repeat Folder, Repeat All or Repeat Off. Press to enable or disable random playback. Press to directly enter a folder (optional) and track number to begin playback of specific track.
VX7228 OPERATION Pandora Operation 2 1 3 4 Pandora Operation Main Menu 1 Current Mode Indicator 2 Information Display 3 Source 4 Station List 5 EQ 6 Elapsed Time 7 Play / Pause 8 Skip 9 Additional Options 10 14 5 6 7 8 9 10 Pandora Radio is available (in the United States, Australia and New Zealand) on your iPhone® - iPod® touch via USB cable or an Android™ device via Bluetooth. Data usage may occur. Note: The Pandora Radio app must be installed on your device.
VX7228 OPERATION Pandora Operation 11 Thumbs Up 11 Thumbs Down 12 12 13 14 Press to tell Pandora you like the track currently playing, and Pandora will play more tracks like it. Press thumbs down to tell Pandora you do not like the track. The track will be skipped, if possible, and your feedback will be recorded. Bookmark Track 13 Press to bookmark a track. Bookmark Artist 14 Press to bookmark an artist. Traffic Announcements 15 15 Press to turn the Traffic Announcements feature On or Off.
VX7228 OPERATION Bluetooth Operation 2 1 3 4 5 Preparation Pairing a New Device Connecting a Paired Device Bluetooth Phone Main Menu 1 Current Mode Indicator 2 Phone Keypad 3 Keypad 4 7 Before you can use a Bluetooth device, it must be paired and connected. Make sure that Bluetooth is activated on your device before you begin the pairing process. The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device.
VX7228 OPERATION Bluetooth Operation 8 9 10 11 Missed Call 8 Redial 9 Backspace 10 Contacts 11 Voice Access 12 12 13 14 15 16 Press to display a list of missed calls. Use the up/down arrows to scroll through the list, and press desired number to connect a call. Press to redial the most recently-dialed number. When dialing the number, press to backspace when needed. Press to display a list of stored contacts.
VX7228 OPERATION SiriusXM® Satellite Radio Operation SiriusXM® Radio Only SiriusXM® Satellite Radio brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com.
VX7228 OPERATION SiriusXM® Satellite Radio Operation 1 2 3 4 Main Menu 1 Current Mode Indicator 2 5 6 7 8 9 Press to return to the Main Menu screen. Displays current mode of operation. File Information 3 Displays information about the current song, including Station Name, Song Title, Artist Name and Album Name. Information Display 4 Displays program information such as channel name, category, song title, artist name and any additional information available.
VX7228 OPERATION SiriusXM® Satellite Radio Operation 4 5 6 7 Band 4 Memory 5 8 9 10 11 Touch to select a band of preset channels. Three bands are available: SXM1, SXM2, and SXM3. Each band can store up to six preset channels. (Preset channels are accessed from the List icon.) Press to view a list of preset channels for each channel, song, artist, info or category. Press any preset number twice to save the current station in that preset spot.
VX7228 OPERATION Unlocking a Channel To unlock an individual channel 1. On the SirusXM menu page2, touch the lock icon. The Enter password Screen appears. 2. Enter your 4-digit password. The following screen appears: Unlock Screen 3. Touch a lock( ) icon until icon disappear. Channel is unlocked. 4. Touch Unlock All icon to unlock aii channels. Change Lock Password The Change Lock Password option allows you to change the password from the default or current custom password to another password.
VX7228 OPERATION SiriusXM Radio Advisory Messages TM SiriusXM Advisory Message Check Antenna 1. The radio has detected a fault with the SiriusXM antenna. The antenna cable may be either disconnected or damaged. 2. Verify that the antenna cable is connected to the SiriusXM Connect Vehicle Tuner. 3. Inspect the antenna cable for damage and kinks. Replace the antenna if the cable is damaged. 4. SiriusXM products are available at your local car audio retailer or online at www.shop.siriusxm.com.
VX7228 OPERATION Media Compatibility - USB/SD Card Media Compatibility MP3 playback sequence begins in the root folder of the USB flash drive or SD card. Any empty folders or folders that do not include MP3/JPG files are skipped. ISO9660 standards: • Maximum nested folder depth is 8 (including the root folder). • Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and “_” (underscore). Some characters may not be displayed correctly, depending on the character type.
VX7228 OPERATION Front 3.5mm Aux Input & Rear RCA A/V Input Auxiliary Input Connect an optional audio source into the 3.5mm (front panel) input. Select auxiliary input from the Main Menu to listen to audio. Adjust volume on the external audio source as needed (if connected to the headphone output of the device). Using AV Input Connect an optional audio/video source to the rear auxiliary input (Red/White/Yellow RCA connectors). Refer to page 6 for details.
VX7228 OPERATION Navigation Built-In Navigation • iGo Primo Next Gen Navigation Engine • USA Map Data (Tele Atlas) • >10 Million Points of Interest • 4GB SD Card w/ Navigation Software • Latest Map Guarantee (Must be redeemed within 30 days of initial activation) • 13 Natural Voice Languages for Navigation Guidance • TTS (Text to Speech) Voice Guidance - Street Names Pronounced Bluetooth Call While Navigating When navigating and a Bluetooth call comes in, the user interface (UI) will automatically switch
VX7228 OPERATION Troubleshooting Problem Unit will not turn on (no power) Unit has power (but no sound) Cause Action Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Black wire not connected Fuse blown Speaker wires not connected Check connections for proper voltage (11~16VDC) One or more speaker wires touching each other or touching chassis ground Check connection to ground Replace fuse Check connections at speakers Insulate all bare speaker wires from each
VX7228 OPERATION FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
VX7228 OPERATION Specifications FM Tuner Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: >30dB Frequency response: 30Hz-13kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: <42dBu Frequency response: 30Hz-2.2kHz General USB Charge: 1A Speaker output impedance: 4~8 ohms Line output voltage: 4 Volts RMS Dimensions: 7" x 7" x 4" (178 x 178 x 100 mm) Design and specifications subject to change without notice.
VX7228 OPERATION Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Dual Electronics Corp.
Dual Electronics Corp. Toll Free: 888-921-4088 www.jensenmobile.com ©2018 Dual Electronics Corp. All rights reserved. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Namsung is under license. Other trademarks and trade names are those of their respective owners.
