VX4012 7” Single DIN Multimedia Receiver DVD / SiriusXM Ready™ / Built-In BT Technology / iPhone® - iPod® / Pandora® / USB / AV In Operation Manual 4VRMS RCA Output
VX4012 Android is a trademark of Google Inc. Sirius, XM and all related marks and logos are registered trademarks of Sirius XM Radio Inc. All rights reserved. microSD is a trademark or registered trademark of SD-3C, LLC in the United States, other countries or both. Pandora® is a registered trademark of Pandora Media, Inc.
VX4012 CONTENTS Features ...��������������������������������������������������������������������������������������������������������������� 5 Controls and Indicators ..........������������������������������������������������������������������������������� 8 Remote Control ..... �����������������������������������������������������������������������������������������������10 External Devices ......�.�������������������������������������������������������������������������������������������14 Quick Start ....
VX4012 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
VX4012 Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VX4012 Multimedia Receiver for maximum enjoyment. Please save this manual for future reference. We recommend having your Jensen VX4012 Multimedia Receiver installed by a reputable installation shop.
VX4012 SiriusXM-Ready® • Satellite Channel Name, Artist, Song, and Categories Displayed on Monitor (Vehicle Tuner and Subscription required and sold separately) Chassis • • • • 1.0 DIN (Import / ISO-DIN Mountable) Motorized Flip-Out / Flip-Up TFT Screen 7” High Definition TFT LCD 800h x 480v x RGB WVGA General • Beep Tone Confirmation (ON-OFF Option) • BT Hands-Free operation for safety and convenience and A2DP for streaming music from your smartphone.
VX4012 WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This is a violation of federal law. WARNING! Never disassemble or adjust the unit. WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water. WARNING! Never use irregular discs.
VX4012 CONTROLS AND INDICATORS OPEN VX4012 Controls and Indicators 1. L CD Screen and Touch Screen: Touch icons on this screen to access menus or control functions. 2. Eject ( ) Button: Press this button to eject a DVD/CD/MP3 disc. Disc play is stopped, the disc is ejected and the unit will change to radio operation. If the disc is not removed from the unit and the button is pressed again, the disc will be re-loaded.
VX4012 3. D isplay (DISP) Button: Touch to adjust the screen brightness. Touch and hold to turn the screen off. When the TFT is closed, press once and repeat to cycle through clock time, metadata, RDS information, etc. The type of information displayed depends upon the selected source 4. 3.5 mm AV IN Jack: This connector accepts a 3.5 mm jack through which signals from various audio/video devices can be applied to the unit. 5. Open Button: Press to open/close the TFT/LCD screen. 6.
VX4012 NOTES ON REMOTE CONTROL USAGE • Aim the remote control at the TFT/screen. • Remove the battery from the remote control or insert a battery insulator if the remote control will not be used for a month or longer. • DO NOT store the remote control in direct sunlight or in a high temperature environment, or it may not function properly. • The battery will last for 6 months under normal conditions. If the remote control does not work, please change the battery. • Use lithium battery type CR2025 (3V) only.
VX4012 Remote Control Functional Description 1. SOURCE (SRC) Button: Press this button to switch between and select available sources. (Radio/Disc/Phone/USB/Phone-Audio/SWC/AUX-1/AUX-2/Camera) 2. EJECT Button ( ): Press this button to eject a DVD/CD/MP3 disc. Disc play is stopped, the disc is ejected and the unit will change to radio operation. If the disc is not removed from the unit and the button is pressed again, the disc will be re-loaded.
VX4012 12. NEXT (uul) Button: Press this button to skip to the next chapter, track or song during playback of a disc. Press this button while in Radio mode to search available radio station by increasing tuning frequency. 13. PLAY / PAUSE ( ) Button: Press this button to pause the playback of a disc. Press this button again to resume normal playback. 14. PREVIOUS (ltt) Button:: Press this button to go back to the previous chapter, track or song during playback of a disc.
VX4012 USING THE TFT MONITOR Opening / Closing the TFT Monitor Open the TFT Monitor Press the OPEN button on the front panel to activate the mechanism that moves the TFT screen into the viewing position. Close the TFT Monitor Press the OPEN button on the front panel to load the TFT screen back into the compartment. TFT Monitor Tilt Angle Adjustment A known characteristic of TFT panels is that the quality of the display varies in relationship to the viewing angle.
VX4012 EXTERNAL DEVICES Connecting External Devices External devices, including a game console, video camera, etc. can be connected to this unit using its front A/V In 3.5mm connector (AV In1), the rear RCA inputs (AV In 2) or the USB port. You cannot directly control external devices connected to the A/V inputs using the front panel controls or this unit’s remote control. AV In 1 AV In1 is used for playback of audio/video from an external device connected to the unit through a 3.5mm connector.
VX4012 QUICK START GUIDE Turning the Unit ON or OFF Press the front panel SRC / Power ( ) button to turn the unit ON. To turn the unit OFF, press and hold the front panel SRC / Power ( ) button for 2 seconds. Selecting an Audio/Video Source, Phone, Steering Wheel Controls, Backup Camera or Pandora To select a source by using the front panel SRC button or main menu screens: 1. Press the SRC button on the front panel to switch playing sources. SRC Button VX4012 Front Panel 2.
VX4012 System Settings Adjustment To access and adjust system settings: 1. Touch the Settings ( ) icon on the Main Menu screen to enter the SETTINGS MENU. Sub-menus where adjustments can be made will be highlighted. Volume Adjustment / Turn On Volume To increase or decrease the volume level, rotate the rotary encoder knob. The unit’s front panel screen will display the volume level for 2 seconds. The volume level ranges from 0 to 50.
VX4012 Playing a Disc To begin playback of an Audio/Video Disc: 1. Press the front panel Rotary Volume ( ) knob / Mute button to turn the unit ON. 2. Insert a disc with the label side facing up. Playback will begin automatically. To eject a disc: 1. Press the front panel Eject ( ) button. Resetting the System Soft Reset - To correct a system halt or other illegal operation, use the tip of a pen to press and release the reset button located just below the front panel interface cover.
VX4012 EQUALIZER CONTROL MENU Adjusting Equalizer Controls The Equalizer adjustment screen allows the user to easily adjust the audio system to meet the acoustical characteristics of the vehicle. The acoustical characteristics vary depending on the type of vehicle and measurements. The Balance/Fader levels and Loudness ON/OFF option of a selected audio/video source (Disc, Radio, USB/iPod®, AV-IN1, AV-IN2 or SXM) is also adjusted through the Equalizer adjustment screen. Equalizer (EQ) (10 Band) 1.
VX4012 Reset Touch the Reset icon to reset the 10 equalizer band frequencies to the mid point. Loudness Touch the Loud icon to turn the loud option ON or OFF. The loud option automatically alters the frequency response curve of audio to make it sound more natural when played at a lower volume level. Exiting the Equalizer To exit the Equalizer menu touch the SRC icon to return to the current source.
VX4012 SYSTEM SETTINGS To access System Settings, touch the icon on the Main Menu screen. There are seven System Settings Sub-Menus (General, Audio, Time, Language, BT, DVD or Volume) that are used to adjust the performance of each option of the VX4012. The Version Sub-Menu is for information only. Touch a desired SubMenu and the Sub-Menu will appear highlighted. The features available for adjustment will appear on the screen. System Settings Screens Adjusting a Sub-Menu Feature 1.
VX4012 Beep - Touch ON or OFF to turn the selection confirmation beep ON or OFF. Wallpaper - Touch wallpaper selection to select wallpaper. Touch again to confirm and set the wallpaper. Calibration- The Touch Screen Calibration adjustment is used to set the parameters of the touch screen to ensure that when the screen is touched, it corresponds to the feature desired. Note: Never use a pen or sharp object to calibrate the touch screen as this will damage the panel. 1.
VX4012 Illumination - Customize the front panel illumination. Touch to change the illumination color. Select a color or touch Custom > Adjust to select the color palette. UI Color - Touch green, red, amber, blue or purple to select the user interface color. Touch again to confirm and set the color. Demo - Touch ON or OFF to turn the demonstration mode ON or OFF. The factory default setting is ON.
VX4012 Audio Sub-Menu Features The Audio Sub-Menu is used to turn the Subwoofer output ON or OFF and to select a Subwoofer crossover frequency. Audio Sub-Menu Screen Subwoofer - Touch ON or OFF to turn the subwoofer output ON or OFF. Subwoofer Crossover - Touch a crossover frequency (80Hz, 120Hz or 160Hz) to set a cut-off frequency for the subwoofer’s low-pass filter (LPF). Time Sub-Menu Features The clock appears in the top right corner of the screen during certain operations.
VX4012 Time - Touch the Time icon and use the p or q icons to set the hour, minute, and either AM or PM. After setting the time, touch Save. The time will appear to the right of the Date option. Date Settings Time Settings Date and Time Setting Screens Language Sub-Menu Features If a DVD supports more than one Subtitle or Audio language, all the languages are available for selection during playback. If the selected language is not supported by the DVD, then the default language is used.
VX4012 BT Sub-Menu Features The BT audio capabilities can be used for wireless phones hands free applications. Before attempting to use the BT functions on this unit, please make sure the wireless phone to be connected supports BT functions. BT Pairing Code Screen 2 BT - Touch ON or OFF to turn the BT function ON or OFF. Auto-Connect - Touch ON or OFF to turn the BT Auto-Connect function ON or OFF. Auto-Answer - Touch ON or OFF to turn the BT Auto-Answer function ON or OFF.
VX4012 DVD Sub-Menu Features The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is unlocked. Once set up, the parental lock is released only by entering the correct password. Once the password is entered, rating is available for setup. DVD Sub-Menu Screen Set Password - This feature allows the user to create a unique 4-digit password to activate or deactivate the “Rating” option. 1.
VX4012 Load Factory - This feature allows the user to “Reset” to restore the factory default settings (Rating system only). To reset the password, access the “RATING” menu and enter the current password. Once the correct password is entered, you can access the “Password” field and enter a new one. Note: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc package, or documentation.
VX4012 AV-IN 1 - Touch the AV-IN 1 icon to enter the setting of the connected device then use the p or q icons to increase or decrease the relative volume level between -6 to +6. AV-IN 2 - Touch the AV-IN 2 icon to enter the setting of the connected device then use the p or q icons to increase or decrease the relative volume level between -6 to +6.
VX4012 DISC OPERATION Compatible Audio Discs Types This system will play the following types of discs: • DVD - DVDs that contain audio and/or video. • Audio discs - Audio CDs that contain audio files. • MP3 discs - A disc that contains audio, video and image files (for example, a CD-R with downloaded MP3 files). Note: This unit is designed to play pre-recorded (original) CD/DVDs. Some burned CD/DVD's may not play due to different recording formats/speeds.
VX4012 Title/Chapter Information - The title/chapter information displayed is the current number of the track playing, the total number of tracks on the disc, the current chapter playing and the total number of chapters on the disc. Time Display - This indicator displays the time as entered by the user in the Settings Menu. Chapter Elapsed Playback Time - The elapsed playback time of chapter is displayed on the screen. Total Playback Time - The total playback time of disc is displayed on the screen.
VX4012 ( ) Repeat - Touch this icon during playback to repeat the current chapter. The icon on the screen will light and small letter C will appear below the icon and the chapter will repeat. Touch this icon a second time to repeat the current title. The icon on the TFT LCD screen will light and small letter T will appear below the icon and the title track will repeat. Touch the icon a third time to repeat the title and chapter.
VX4012 Direct Entry When the Direct Entry icon is touched the Direct Entry Screen appears. The user can manually select a title or a chapter. By touching q icon, the user can select a chapter or title. The title or chapter can be selected by touching the corresponding number for a title or chapter. After entering the numbers, touch the OK icon. If a wrong digit is entered, touching the arrow will remove the number. After touching OK, playback will begin.
VX4012 Multi-Language Discs (DVD Only) Changing Audio Language - If you are watching a disc recorded in multiple languages, touch the TFT LCD screen, then touch AUDIO to choose a language. Each time the icon is touched the language will change. Changing Subtitle Language - If you are watching a disc recorded in multiple languages with subtitles, touch the TFT LCD, then touch Language screen to choose the language that you would like the subtitles to appear.
VX4012 General Disc Information Disc Properties Symbol 12cm Disc Properties Max Play Time Single side single layer (DVD-5) Single side double layer (DVD-9) Double side single layer (DVD-10) Double side double layer (DVD-18) (MPEG 2 Method) 133 minutes 242 minutes 266 minutes 484 minutes Single side single layer (VCD) (MPEG 1 Method) 74 minutes Single side single layer 74 minutes Disc Symbols Symbol Meaning Number of voice languages recorded.
VX4012 CD Operation From the Main Menu Screen touch the DISC icon or insert a CD into the disc slot, label side up. Playback begins in CD mode when a disc is inserted correctly. CD Main Menu The on-screen icons and touch key areas are outlined below. CD Main Menu SRC Icon - Touch this icon to return to the Main Menu Screen. DISC - Displays the current source. Track Number- Lists the current track playing and the total number of tracks contained on the disc.
VX4012 List - Touch this icon to access the list of tracks contained on the disc. Touch a desired track icon twice and the track will begin playing. ( ) Shuffle - Touch this icon to play tracks in the directory in a random order. The icon will light on the main CD screen. ( ) Repeat - Touch this icon to repeat playback of the current track. The icon on the TFT LCD screen will light and small number 1 will appear below the icon and the track will repeat.
VX4012 CD List Touching the List icon will display the CD List Screen. The CD List Screen illustrates the contents of a CD disc. The contents are divided into folders and various file types. Touching the icon will display the files present on the disc. CD List Screen ( ) Audio Files - Touch the audio file icon to display the audio file. Touch the audio file icon to select a track. Touch the audio file icon again to confirm and playback will begin.
VX4012 Track Direct Entry When the Direct Entry icon is touched the Direct Entry Screen appears. The user can manually select a track by touching the corresponding number. After entering the track numbers touch the OK icon. If a wrong digit is entered touching the arrow will remove the number. After touching OK playback will begin. CD Track Direct Entry Screen Controlling Playback Inserting a Disc - Upon inserting a CD, disc play begins.
VX4012 MP3 / WMA Operation MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. Insert a MP3 Disc into the disc slot, label side up. Playback begins in MP3 mode when a disc is inserted correctly. The unit plays the songs in the order they were burned on to the disc. The menu for playing audio MP3 music files is the same as previously described for CD discs.
VX4012 Controlling Playback Inserting a Disc- Upon inserting a MP3/WMA disc, disc play begins. You cannot insert a disc if there is already a disc in the unit or if the power is off. Ejecting a Disc - Press the Eject ( ) button on the front of the unit to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.
VX4012 RADIO TUNER OPERATION From the main menu screen touch the radio icon. The radio tuner display screen appears. Radio Tuner TFT Display The on-screen icons and touch key areas are outlined below. Radio Tuner TFT Display Screen SRC Icon - Touch to view the SOURCE MENU and select a new playback source. Radio - Displays the current source. Time Display - This indicator displays the time as entered by the user in the Settings Menu. Preset List - Provides a display of the preset frequencies.
VX4012 More ( p/q ) - Touch the p/q icons to display the next or previous page of the Disc menu. ( ) Seek Down / Manual Seek - Touch this icon to seek the previous available radio station. Touch and hold this icon (Until "Manual Seek -" is displayed) to manually tune the radio in increments. Default Seek Down mode is resumed after 5 seconds of inactivity. ( AS ) Auto Store - Touch to automatically search and store all strong stations.
VX4012 RDS ON / OFF - Radio Data System (RDS) is a communications protocol standard for embedding small amounts of digital information in conventional FM radio broadcasts. CT ON / OFF - (Clock Time) Some stations broadcast the time and date within the encoded RDS signal. The clock time is automatically adjusted when ‘CT’ is set to ‘ON’. Note: Stations broadcasting close to time zones may not broadcast the correct time in your particular area. In this case, turn CT Off and manually set the time.
VX4012 Direct Entry Tuning When the Direct Entry icon is touched the Direct Entry Screen appears. The user can enter the desired radio station frequency using the on-screen number pad. After entering the radio station frequency touch the OK icon. If a wrong digit is entered touching the green arrow will remove the number. After touching OK the radio will tune to the entered station. Playback will begin.
VX4012 3. T ouch the preset number in which you would like to store the current station. The station frequency is displayed at the top of the menu. The preset number will appear highlighted. The station frequency will be stored in the highlighted preset. The station will be displayed Tuner TFT LCD screen. Station can also be stored by touching and holding the preset icon to store the station currently tuned as a preset. Recalling a Station 1. Select a preset band (if needed). 2.
VX4012 USB / MicroSD Card OPERATION The unit will read the audio/video files on USB / MicroSD card devices automatically. NOTE: The USB port will recognize most USB flash memory devices and portable hard drives. Hard drives must be formatted to FAT32. NTFS is not supported. Up to 32GB SD cards are supported. Inserting / Removing a USB / MicroSD card Device To insert a USB device: 1. Locate the Interface Cover on the front of the radio. 1 2 3 4 Right Audio Left Audio Ground V ideo 3.
VX4012 USB / MicroSD Card Operation From the main menu screen touch the USB icon. USB / MicroSD Card Main Menu The on-screen icons and touch key areas are outlined below. USB Main Menu SRC Icon - Touch this icon to return to the Main Menu Screen. Scrolling Display - Displays current track information. Track Number - Lists the current audio track playing and the total number of audio tracks in audio mode. Lists the current video folder and the total number of video folders in video mode.
VX4012 List - Touch this icon to access the list of audio and video files contained on the USB device. Touch a folder icon and the contents of the folder will be displayed. Touch a desired track icon twice and the track will begin playing. ( ) Shuffle - Touch this icon to play audio or video tracks in a random order. The icon will light on the main TFT LCD screen. ( ) Repeat - In audio mode touch this icon to repeat playback of the current audio track.
VX4012 USB / MicroSD card List Touching the List icon will display the USB List Screen. The USB List Screen illustrates the audio and video files present in the USB device. The contents are divided into folders and various file types. The file types consist of audio and video files. Touching the folder icon will display the files present in the folder. USB List Screen ( ) Audio Files - Touch the audio file icon to display the audio file. Touch the audio file icon to select a track.
VX4012 Direct Entry When the Direct Entry icon is touched the Direct Entry Screen appears. The user can manually select a track by touching the corresponding number. After entering the track numbers touch the OK icon. If a wrong digit is entered touching the arrow will remove the number. After touching OK playback will begin. USB Track Direct Entry Screen Moving Through Tracks Touch the Next ( ) icon to advance to the next track on the USB device.
VX4012 iPod® / iPhone® Controls Accessing iPod® Mode The user can control an iPod®/iPhone® using the touch screen to access, albums, songs, etc. The unit will automatically switch to iPod® mode when an iPod®nano, iPod® touch or iPhone® is plugged into the front panel USB connector. Also the iPod® can be accessed from the Main Menu Screen by touching the iPod® icon (only available when an iPod® or iPhone® is connected to the front panel USB connector).
VX4012 ( ) Previous - Touch this icon to play the previous track. ( ) Play/Pause - Touch this icon to begin playback. Touch this icon again to pause playback. ( ) Next - Touch this icon to play the next track. List - Touch this icon to access the list of audio and video files contained on the iPod®. Touch a folder icon and the contents of the folder will be displayed. Touch a desired track icon twice and the track will begin playing.
VX4012 ( ) Audio Files - Touch the audio file icon to display the audio file. Touch the audio file icon to select a track. Touch the audio file icon again to confirm and playback will begin. ( ) Video Files - Touch the video file icon to display the video file. Touch the video file icon to select a video file. Touch the video file icon again to confirm and playback will begin. ( ) Image Files (JPEG etc) - Image files are selected and controlled by the iPod®.
VX4012 Pausing Playback Touch the Play/Pause ( ) icon to suspend or resume playback. PIC - When the PIC icon is touched the picture adjust screen appears. Touch this icon during playback to adjust the color brightness, contrast, saturation and hue. The levels can be adjusted to suit the users preferences. The adjustments are accomplished by touching the + or - icons to decrease or increase the desired setting. The settings have range of 1 to 20.
VX4012 Connecting External Devices AV In 1 / AV In 2 AV In 1 AV In 1 is used for playback of audio/video from an external device connected to the unit through a 3.5mm jack located on the front panel. The unit can increase or decrease the volume of the connected device. All other controls are done on the connected device. AV In 1 Screen (No Signal) AV In 2 AV In 2 is used for playback of audio/video from an external device connected through RCA connectors located on the back of the unit.
VX4012 Using a Smartphone via HDMI / MHL What is HDMI? HDMI (High Definition Multimedia Interface) is a digital interface for audio and video sources. HDMI is a digital replacement for analog video standards (Such As "Audio-Video Input" via RCA Cables).
VX4012 Interfacing your Smartphone - iPhone 6® / iPhone 6 Plus® / iPhone 5® / iPhone 5S® / iPhone 5C® Note: In order to connect your smartphone, you will need the "Apple Lightning Digital AV adapter" (HDMI adapter). No app or software is needed for Apple devices. Apple HDMI adapters are available at your local mobile phone retailer. Apple devices do not require a BT connection.
VX4012 Connecting Your Smartphone - Android / Apple 1. Jensen HDMI / MHL Connect App Installation Procedure Download and install the Jensen HDMI / MHL Connect app from Google Play (Android Devices Only) onto your smartphone. 2. Smartphone / Head Unit BT Connection In order to have full touch screen control (Android Devices Only) from the head unit screen (via the HDMI / MHL Connect app), a BT connection is required between your smartphone and head unit.
VX4012 BT OPERATION NOTE: The line-of-sight distance between this unit and your mobile phone must be 8 feet (2.4 meters) or less for sending and receiving voice and data via BT wireless technology. Please make sure your mobile phone supports BT. (Headset or Handsfree profiles or both and A2DP). Adhere to the following guidelines for successful operation. • Before using BT functions, you must pair your mobile phone to the VX4012 unit (see “Pairing the Your Mobile Phone with the Unit”.
VX4012 BT User Interface The on-screen icons and information for BT functions are outlined below. SRC - Touch this icon to return to the Main Menu Screen. BT - Displays the current source. LGVX9200 - Indicates the device that is paired with the unit. ( ) - Indicates whether the unit is connected with a BT device. Touch to connect to a BT device. ( ) - Touch to disconnect from a BT device. V4012 Device Name - Provides the name that will appear on the BT device.
VX4012 The user can make or receive phone calls with BT enabled phones through the unit. The user can also listen to music from a BT enabled device. Pairing BT Devices To connect your BT phone to the unit, the user needs to pair the phone to the unit. Pairing only needs to be done once per phone. The user can pair up to five (5) phones. Use your mobile phone to begin the BT pairing process. 1. Touch the MENU on the front panel to access the source menu. 2.
VX4012 8. Touch the “Pair” icon on the unit’s BT user interface screen. 9. A prompt to pair or bond should appear on your mobile phone. Accept the request and initiate the process. NOTE: Some mobile phones require a “pass key” or pairing code to connect. If your phone requires a pass key or pairing code, you will need to enter this number. The default pairing code for the VX4012 is "5309". 10. A prompt to enter a PIN number or passkey for the unit should appear. The default passkey for the unit is “5309”.
VX4012 Making an Outgoing Call Outgoing calls can be performed in two manners. The outgoing call can be direct dialed using the front panel keypad or the by touching either the Phonebook or Call History icons, selecting a name and touching the phone number. Phonebook Synch / Importing Contacts / Call History 1. Select BT function (Handset icon) from the BT Home Menu. 2. Press "Option". Go to > "Phone Synch". Press "Synch" to import the mobile phone contacts.
VX4012 Audio Mute To mute the phone call audio from the unit when a call is received, press the front panel rotary knob. Press the front panel rotary knob again and phone call audio will be restored to the unit. Call Log The call log consists of dialed numbers, received calls and missed calls. Note: Not all mobile phones allow access to missed, received or dialed calls and some will not allow uploading of your mobile phone's address book.
VX4012 Call Transfer While talking, to transfer audio from the unit back to the mobile phone, touch the Transfer to Phone icon. You can only transfer a call after it has been answered. Touching the Transfer to Radio icon will return the audio from the mobile phone to the unit.
VX4012 While listening to audio the following functions are available: 1. Pause/Play ( ) icon: Touch to pause playback. Touch again to resume playback. 2. Previous ( ) icon: Touch to play the previous track. 3. Next ( ) icon: Touch to play the next track. Functionality varies depending on the profile used: • A2DP: Stream audio from your BT compatible audio player and listen to the music through the unit. • AVRCP: Play back, pause, select songs, etc.
VX4012 REAR CAMERA OPERATION This unit is “camera ready.” Before accessing any camera features, you must install a rear video camera. When the camera is not installed and the function is accessed by the gear selector being placed in reverse or by the unit’s menu, the message “No Signal!” will be displayed and the following screen will appear. Rear Camera Screen When the camera is installed, the rear view image of what is behind the vehicle will appear when the vehicle is placed in reverse gear.
VX4012 SWC Ready The built-in SWC Interface is compatible with PAC steering wheel control modules. The PAC SWI-RC is recommended. A third-party adapter must be used in order for the VX4012 to be compatible with any steering wheel controls. Note: Not all OE steering wheel functions may be supported by the VX4012. PTT Will activate Siri / Google Voice if mobile phone supports the feature. Not compatible with all phones/vehicles. The following controls are available for most vehicles: 1. Volume Up (+) 4.
VX4012 PANDORA® RADIO OPERATION Pandora Radio is available on your iPhone® / iPod® touch via USB cable or an Android™ device via BT. Data usage may occur. Note: Pandora is available in the United States, Australia and New Zealand. Note: The Pandora Radio app must be installed on your iPhone®/iPod® touch or Android device. For iPod®/ iPhone® connectivity, you can use the cable that comes with your Apple device for audio connectivity.
VX4012 ( ) Pause / Play Icon - Touch the icon to pause playback. Touch the begin playback. ( icon to ) Next Icon - Press this icon skip a song, subject to the skip limit. ( ) Thumbs Up - Press thumbs up to tell Pandora you like the track currently playing, and Pandora will play more tracks like it. ) Thumbs Down - Press thumbs down to tell Pandora not to play this track. ( Pandora will skip to the next track.
VX4012 Station List Screen The Station List Screen allows you to search for music by stations you created. Pandora® Radio Station List Screen Touch a station on the list to choose that station. Touch the Scroll Down (q) icon to view the next page in the list or the Scroll Up (p) icon to view the previous page. Touch the Return to Now Playing icon to return to the Pandora Radio user interface screen. To Launch/Stop Pandora Radio 1. Launch the Pandora app on the iPhone®, iPod® or Android device. 2.
VX4012 3. I f both an Android device and iPhone®/ iPod® are connected to the radio, the Select Android or iOS Screen appears. Select Android or iOS Screen 4. To stop Pandora,® exit the Pandora app on the iPhone®, iPod® or Android device. Pandora Error Messages Message Displayed Cause Corrective Action BookMark Track Error Software Error The track could not be bookmarked, please try again in a moment.
VX4012 SiriusXM® RADIO OPERATION Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com. Activating SiriusXM® Radio After installing your SiriusXM Connect Vehicle Tuner and antenna, power on your radio and select SiriusXM mode.
VX4012 SiriusXM® User Interface The on-screen indicators and touch key areas for SiriusXM® functions are outlined below. Menu Page 1 SiriusXM® Menu Page 1 SRC Icon - Touch to return to the unit’s Main Menu Screen. Band indicator (SXM1 icon) - Displays SiriusXM® radio band currently selected. Three bands are available: SXM1, SXM2, and SXM3. Time Display - This indicator displays the time as entered by the user in the Settings Menu.
VX4012 Previous ( ) Icon - Touch to tune to the previous channel. Channel/Category Icon - Touch to toggle the icon displayed between Category and Channel. When Channel is displayed, touching or tunes channels up or tunes channels within a or down. When Category is displayed, touching category up or down. Next ( ) Icon - Touch to tune to the next channel. List Icon - Touch to select a channel search criteria. Presets lists preset channels stored by the user. Channels lists all SXM channels.
VX4012 Menu Page 2 SiriusXM® Menu Page 2 More Icon - Touch to go to SiriusXM® Menu Page 1. Band Icon - Touch to select a band of preset channels. Three bands are available: SXM1, SXM2, and SXM3. Each band can store up to ten preset channels. (Preset channels are accessed from the List icon.) Mem Icon - Touch to display screen used to enter current channel into preset memory. Scan Icon - Touch to scan all channels starting at channel 1. The tuner will pause for approximately five seconds at that channel.
VX4012 Switching to SiriusXM® Radio • Touch the top left corner of the screen (the SRC box) to view the Main Menu screen. From the Main menu screen, touch the SiriusXM icon. • Press the MENU button on the front panel to switch to the SXM source. Selecting the SiriusXM® Band Touch the Band icon on the SXM Menu screen to change between the following bands: SXM1, SXM2, and SXM3.
VX4012 Using Preset Channels A preset is a channel name that is stored for instant access to that channel. Ten numbered preset buttons store and recall channels for each band. Storing a Channel 1. Select a band (if needed), then select a channel. 2. O n the SiriusXM® menu page 2, touch the Mem icon to access the Preset Channel Screen. SXM Preset Channel Screen 3.
VX4012 Searching for a Channel Search by Channel To search by channel: 1. On the SirusXM® menu page 1, touch the Category/Channel icon (if needed) to select Channel. 2. Touch List to display the Channel Search Screen: Channel Search Screen 3. T ouch a channel to tune to that channel. Touch the or icon to scroll up or down the list. Search by Category Categories group music by type such as jazz, rock, classical, etc. To search by category: 1.
VX4012 Locking SXM Mature Channels SiriusXM® attaches a label to channels with mature content. The radio recognizes these channels as “Mature”. The Mature Channel Lock option allows you to lock out channels with “Mature” labels. These channels will still appear in the channel listing (with a lock icon), but will not be tunable unless the parental lockout password is correctly entered. Lock Mature Channels To lock mature channels: 1. On the SirusXM® menu page 2, touch the Lock icon.
VX4012 Temporarily Unlock a Mature Channel When the global “Mature Lock” is enabled, a mature channel can be temporarily unlocked. All mature channels are temporarily unlocked (but still hidden when channel browsing) until the SXM source is changed, Accy (Key) is cycled or the “Power Button” on front panel of radio turns the Radio off. This mode is useful for listening to mature/adult content on a temporary basis, allowing you to listen on a locked channel without having to disable the global “Mature Lock.
VX4012 Unlock All Mature Channels To unlock all mature channels: 1. On the SirusXM® menu page 2, touch the Lock icon. The following screen appears: Enter Lock Password Screen 2. E nter your 4-digit password and then press the Ok icon. The following screen appears: 3. Touch the Unlock All icon. All channels are now unlocked.
VX4012 Locking Individual SXM Channels An user can lock individual channels. When locked, a channel has the lock ( icon next to it on the channel list. ) Locking a Channel To lock an individual channel: 1. On the SirusXM® menu page 2, touch the Lock icon. The following screen appears: Enter Lock Password Screen 2. E nter your 4-digit password and then press the OK icon. The following screen appears: Lock Screen 3. T ouch an unlocked ( ) icon.
VX4012 Unlocking a Channel To unlock an individual channel: 1. On the SirusXM® menu page 2, touch the Lock icon. The Enter Password Screen appears appears. 2. Enter your 4-digit password. The following screen appears: 3. Touch a lock ( unlocked ( Unlock Screen ) icon to unlock a channel. The icon is replaced by an ) icon. The channel is now locked. Change Lock Password The Change Lock Password option allows you to change the password from the default or current custom password to another password.
VX4012 SiriusXM® Radio Advisory Messages SiriusXM® user advisory messages are listed below: Advisory Displayed Cause Check SXM Tuner Check the SiriusXM® tuner connection on the back of the unit to ensure that it’s correctly connected. Check SXM Antenna Ensure the SiriusXM® antenna cable is connected to the SiriusXM® tuner correctly. Check the SiriusXM® antenna wire for breaks or sharp bends. Replace the antenna if necessary. If the message remains, the antenna may have been damaged.
VX4012 User Up-Loadable Wallpaper In addition to the 5 selectable wallpaper selections, you can up load your own wallpaper image to the VX4012. Note: The wallpaper image must have a .bmp file extension and the size / resolution must be 800 x 480, 24 or 32 bit. Other file sizes / resolutions will result in the image being enlarged or reduced and may appear distorted. Uploading User Wallpaper Only one user wallpaper can be loaded at a time into the VX4012.
VX4012 TROUBLESHOOTING Troubleshooting Problem Cause Corrective Action Radio Fuse open Install new fuse with correct rating Car battery fuse open Install new fuse with correct rating Illegal operation Press the RESET button located in the middle of the left side of the front panel Improper audio output connection Check wiring and correct Volume set too low Increase volume level Improper “MUTE” connection Review wiring diagram and check “MUTE” connection Speakers damaged Replace speakers H
VX4012 Problem Cause Corrective Action Incorrect connection to parking brake wire Check wiring and correct Parking brake is not engage Stop vehicle in safe place and apply parking brake DVD is not compatible with current TV system settings Change setup to accommodate disc Improper video signal connections Check wiring and correct Improper aspect ratio setup Use correct aspect ratio setting Auto antenna is not fully extended Extend antenna fully or connect the auto antenna control cable properl
VX4012 Problem Cause Corrective Action Disc does not play back Disc is warped or scratched Use disc in good condition Disc is dirty or wet Laser pickup is dirty Clean disc with soft cloth Clean laser pickup with cleaning disc Incompatible disc is used Use compatible disc Disc rating exceeds Parental Lock rating limit Change Parental Lock settings to lower restriction Disc region code is not compatible with unit Use disc with proper region code Disc is inserted upside down Insert disc with lab
VX4012 Disc Error Messages Message Displayed Cause Loading Disc is being read No Disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side up Disc not present in loading compartment Insert disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side up Bad Disc Unknown disc Disc format is not compatible with this unit Region Error DVD is not compatible with region code of unit Error Illegal mechanism operation 90 Cor
VX4012 CARE AND MAINTENANCE 1. 2. 3. 4. 5. 6. 7. 8. se only a clean silicone cloth and neutral detergent to clean the front panel U or monitor. A rough cloth and non-neutral detergent (such as alcohol) may result in scratching or discoloration. Do not get water or cleaning fluids on the unit. If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs, allow the unit to cool before operating the player again.
VX4012 SPECIFICATIONS DVD/CD Player Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RW Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, Xvid, AVI, MPEG 1/2 and AAC Signal to Noise Ratio: >95dBA Dynamic Range: >95dB Frequency Response: 20Hz to 20 kHz, -3dB Channel Separation: > 60dB @ 1 kHz D/A Converter: High Performance Multi-Bit Sigma-Delta Modulator Video Format: NTSC, PAL (auto-detection) Output: 1Vp-p (75-ohm) Input: 1Vp-p (75-ohm) FM Tuner Tuning Range: 87.5MHz - 107.
VX4012 General Auxiliary (Audio) Input Impedance: 10k -Ohm Power Supply: 11 to 16VDC, negative ground Power Antenna / Amp Remote (Blue): 500mA max (Current limited protection) Operating Temperature: 0C ~ 65C / 32F ~ 149F Fuse: 15-Amp, ATO type Chassis Dimensions: 7” X 7” X 2” (178mm x 178mm x 50mm) CEA Power Ratings Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference (Reference: 1 Watt, 4-Ohms) Frequency Response: 20 Hz - 20 kHz, -3dB.
VX4012 NOTES: 94
VX4012 Voxx Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 800-323-4815 www�jensenmobile�com © 2015 Printed in China VX4012 Common Replacement Parts Wire Harness (Pwr / Spk / Line Out / BT Mic / SWC Adapter) 30314250 Trim Ring 30413940 Remote Control 30714230 Hardware Bag 30513940 33914230 HDMI Right Angle Adapter Operation manuals and other material online at: www.jensenmobile.
79 79 *OTUBMMBUJPO 2VJDL 4UBSU (VJEF $PNQMFUF PQFSBUJPO NBOVBMT BSF POMJOF BU XXX KFOTFONPCJMF DPN /PUF 5IFSF JT OP PQFSBUJPO NBOVBM JO UIJT QBDLBHF What’s in the Box 5IF GPMMPXJOH JUFNT BSF TVQQMJFE XJUI UIF 79 79 +HDG 8QLW *36 $QWHQQD 9; 2QO\ 7ULP 5LQJ +DUGZDUH %DJ 3RZHU 6SHDNHU 2XWSXW +DUQHVV 5HPRWH &RQWURO ([WHUQDO 0LFURSKRQH 0RXQWLQJ 6OHHYH 5HPRYDO .H\V ,QVWDOODWLRQ 4XLFN 6WDUW *XLGH Tools and Supplies 5IF GPMMPXJOH UPPMT BOE TVQQMJFT BS
4UFFSJOH 8IFFM $POUSPM 48$ 3FBEZ 5IF SFDPNNFOEFE 48$ *OUFSGBDF JT UIF 1"$ 48* 3$ TUFFSJOH XIFFM DPOUSPM BEBQUFS 48* 3$ JOTUBMMBUJPO IJOUT 4FU 3BEJP 4FMFDU 4XJUDI 4FU UIF 48* 3$ UP QPTJUJPO 1JPOFFS 4POZ 0UIFS 1SPHSBNNJOH 6TF UIF 1JPOFFS 4POZ 0UIFS SBEJP GVODUJPO NBQQJOH PSEFS GPS +FOTFO CSBOEFE IFBE VOJUT 8IFO QSPHSBNNJOH UIF 48* 3$ JG B GVODUJPO JT OPU TVQQPSUFE PS OPU EFTJSFE UIFO UIF GVODUJPO .645 CF TLJQQFE BT QFS UIF 1"$ 48* 3$ JOTUSVDUJPOT 5IF 48$ GVODUJPOT .
SWC A SWC B SWC GND (14 "/5&//" 79 0OMZ HDMI Some vehicles may not support all SWC functions. Professional Installation is recommended.
26*$, 45"35 (6*%& 5VSOJOH UIF 6OJU 0/ PS 0'' 1SFTT UIF GSPOU QBOFM WPMVNF LOPC UP UVSO UIF VOJU 0/ 1SFTT BOE IPME UIF WPMVNF LOPC TFDPOE UP UVSO UIF VOJU 0'' 4FMFDUJOH BO "VEJP 7JEFP 4PVSDF 1IPOF 4UFFSJOH 8IFFM $POUSPMT #BDLVQ $BNFSB PS 1BOEPSB 5P TFMFDU B TPVSDF 1SFTT UIF GSPOU QBOFM .&/6 CVUUPO PS UPVDI UIF 43$ JDPO UP WJFX UIF .BJO 4PVSDF .
VX7012/VX4 012 INSTALLATION GUIDE What's in the Box The following items are supplied with the VX7012/VX4012: Head Unit GPS Antenna (VX7012 Only) • Trim Ring Hardware Bag Power/Speaker Output Harness • Remote Control • External Microphone Mounting Sleeve & Removal Keys Installation Guide Tools and Supplies The following tools and supplies are needed to install the head unit: • Torx type, flat-head and Philips screwdrivers • Wire cutters and strippers • Tools to remove existing radio (screw driver, socket w
Optional Equipment Steering Wheel Control Interface (SWC) - The VX7012/VX4012 are compatible with various PAC, Metra and iDatalink Maestro SW steering wheel control adapters. Disconnect the Battery To prevent a short circuit, be sure to turn off the ignition and remove the negative(-) battery cable prior to installation. NOTE: If the head unit is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable.
Wiring Diagram CAUTION! IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or have the installation handled by an experienced technician. Need Help? For technical assistance, call the Jensen customer support line at 1-800-323-4815. ,"'3 ,< YELLOW- VIDEO OUT BLACK 3.5MM - BT MICROPHONE 0 J-[ ~ ':r SWCA White/Purple if SWCB White/Brown SWCGND Brown/Black ;:;· 3 ~ :::s , ..
Voxx Electronics Corporation Hauppauge,NY11788 Technical Assistance: 800-323-4815 www.jensenmobile.
DO NOT RETURN THIS PRODUCT TO THE RETAIL STORE. FOR TECHNICAL ASSISTANCE, PLEASE CALL: 800-323-4815 OR VISIT OUR WEBSITE: WWW.JENSENMOBILE.
Limited Warranty DO NOT RETURN THIS PRODUCT TO THE STORE CD or Multimedia Radios/Headunits Voxx Electronics Corporation ("the Company") is committed to quality and customer service, and are pleased to offer you this Warranty. Please read it thoroughly and contact the Company at 1-800323-4815 with any questions. Who is covered? The Company extends this warranty to the original retail purchaser of products purchased through an authorized Voxx retailer in the U.S.A., Puerto Rico or Canada.
Garantia Limitada Radios del CD o de los Multimedia NO RETORNE ESTE PRODUCTO A LA TIENDA Voxx Electronics Corporation ( "Ia Compai\ia) es una corporaci6n comprometida con Ia calidad y el servicio al cllente, y se com place en ofrecerle esta Garantia. Por favor, Ieaia completamente y contacte a Ia Compai\ia al1-800-323-4815 por cualquier duda. i. Quiim esta cubierto? La Campania extiende esta garanti a al comprador minorista original de los productos comprados a un distribuidor Voxx autorizado en USA.