Owner's Manual
Table Of Contents
- Installation / Quick Start Guide (Downloaded from Jensen)
- Installation Guide (Supplied with Product)
- Operation Manual
- Reset (Button #6)
- Bluetooth PIN (5309)
- Table of Contents
- Features
- Parts & Controls
- Remote Control
- Using the TFT Monitor
- External Devices
- Quick Start Guide
- Equalizer Control Menu
- System Settings
- Disc Operation
- Tuner Operation
- USB Operation
- iPod / iPhone Operation
- AV-In1 / AV-In2 Operation
- Bluetooth Operation
- Rear Camera Operation
- Steering Wheel Control Operation
- Pandora Operation
- SiriusXM Operation
- Care and Maintenance
- Specs
- Warranty
14
VX4012
EXTERNAL DEVICES
You cannot directly control external devices connected to the A/V inputs using
the front panel controls or this unit’s remote control.
3.5mmA/V Cable (not included)
Video
Left Audio
Right Audio
Ground
1
2
3
4
USB Cable (not included)
Connecting External Devices
Connecting External Devices
External devices, including a game console, video camera
, etc. can be connected
to this unit using its front A/V In 3.5mm connector (AV In1), the rear RCA inputs
(AV In
2) or the USB port.
AV In 1
AV
In1 is used for playback of audio/video from an external device connected to
the unit through a 3.5mm connector. The unit can increase or decrease the
volume of the connected device. All other controls are done on the connected
device. Select AV In1 to playback audio/video from the front panel 3.5mm AV In.
AV In 2
AV In2 is used for playback of audio/video from an external device connected to
the RCA connectors located on the back of the unit (see the VX4
012 Installation
Guide). The unit can increase or decrease the volume of the connected device. All
other controls are done on the connected device. Select AV In 2 to playback audio/
video from the rear RCA AV In
MicroSD card slot