User guide

31
8.4.2 Constructing a New Calibration Curve
8.4.2.1 Measuring Standard Samples
Select the Standard tab.
Insert the first standard into the sample position in
the sample chamber and the reference into the
reference position in the sample chamber.
Select the Start button to initiate the measurement
A new window will open allowing the Standard
name and concentration to be edited. The actual
photometric reading of the standard will be
displayed in the Readout window. Select OK to
transfer the information to the main standard tab.
Repeat this procedure for each standard sample.
8.4.3 Sample Measurement
To quantify an unknown sample select the
Sample tab and select the Start button.