Jeppesen World Headquarters 55 Inverness Drive East • Englewood, CO 80112-5498 • USA Jeppesen GmbH Frankfurter Str. 233 • 63263 Neu-Isenburg • Germany Technical Support Americas Europe, Asia, Australia 800.732.2800 or 303.328.4587 + 49 6102 508270 e-mail: pctechsupport@jeppesen.com e-mail: fra.pctechsup@jeppesen.com Sales & Service Americas 800.621.5377 or 303.328.4274 e-mail: captain@jeppesen.com Europe, Asia +49 6102 5070 e-mail: fra-services@jeppesen.
System Requirements Minimum System Requirements Recommended System Requirements PC Type • Desktop, notebook, or tablet PC • JSUM – USB port* • Desktop, notebook, or tablet PC • JSUM – 100mA or higher powered USB port* Processor • 1 GHz PC or higher processor • 2 GHz or higher processor Memory • 1 GB RAM This guide briefly explains the procedures for installing JeppView® and JeppView FliteDeck®. It also provides information to help you get started quickly in each application.
Installation Procedures Installation Overview The following instructions guide you through the installation process for JeppView and JeppView FliteDeck. To install the software, you must have administrative permissions on your computer. The three JeppView discs must be installed in the following order: Administrative Permissions Before installing JeppView and JeppView FliteDeck, verify that the permissions are set so your user account has full access to the applications.
Existing Users Start Here New JeppView Users Start Here If this is your first time installing JeppView, follow these steps. Ensure that you have administrative permissions on your computer before starting. To install the JeppView program on your computer: If you changed your JeppView subscription to update your MFD system, or currently use JeppView v3 with a different serial number, you must deactivate your current version.
Electronic Chart Data Disc 1 (DVD) New users must install the Program CD prior to loading Disc 1. Once the programs are installed, update the data every 14 days through the Internet or with the disc updates received in the mail. To install your terminal charts by DVD, follow these steps: To install your terminal charts from the DVD, follow these steps: 1. I nsert Disc 1 into your computer DVD reader. If the setup program doesn’t start automatically, browse to your computer DVD drive and double-click setup.
Activating Your Software Getting Started with JeppView Your software license permits you to install and run JeppView and/or JeppView FliteDeck on up to four computers for your own personal use. When you open JeppView or FliteDeck for the first time on each computer, the Activation Wizard launches and guides you through the activation process.
Creating your First RoutePack and Route (Continued) • U pdate Letter—includes a list of all terminal charts that have changed since the last time the RoutePack was printed. • B ooklet printing—to use booklet printing, you must have a printer that can print on both sides of the paper (duplex printing). Only the following options can be selected for Booklet printing: JeppView Charts for RoutePack, Two per page, and Print on both sides.
Printing a Subscription Revision Letter To print a subscription Revision Letter from the Airport List, follow these steps: 1. C heck that filters are inactive in the filter status at the bottom of the Airport List window. Active filters may hide some airports in your subscription. The Revision Letter reports only on the airports shown in the Airport List. 2. S elect all of the airports in the Airport List by selecting any airport and pressing CTRL+A. 3.
Creating a Route (Continued) Using the Clipboard 7. Click Insert Waypoint (F8). 8. FliteDeck draws the proposed route on the chart and lists the waypoints. 9. Click Execute (F7) to confirm your route. You now have a route in FliteDeck from which to choose terminal charts or conduct enroute navigation. Viewing Terminal Charts for the Route To view terminal charts, follow these steps: 1. Click Terminal or press PAGE DOWN to go to the Terminal page. 2. Click Select Airport (F1). 3.
Viewing Enroute Information for the Route (Continued) Using the Jeppesen Services Update Manager (JSUM) Congratulations, you are now using JeppView FliteDeck. Multi-function Display users only To learn more, refer to the Help file by going to Start > Programs > Jeppesen > JeppView FliteDeck3 > FliteDeck3 Getting Started Help. This section details the JSUM installation steps and how to copy terminal chart data onto the appropriate media to update your MFD hardware.
Installing JSUM (Continued) JSUM Login 3. Read the software license agreement and accept the terms. Click Next. 4. S elect the path to install JSUM and click Next. It is recommended that you use the default folder or a location where other Jeppesen programs have been installed. If you use a different drive or folder, click Change, then type the path or browse to the directory (folder) chosen. 5. Select a program folder and click Next. 6.
NOTES Updating Your Media (Continued) 4. C lick Continue. The programming cycle writes the data to the media. As the programming steps are successfully completed, the status bar and the Program Progress column display the percentage complete. CAUTION! Do not remove the media until the programming cycle is complete! Otherwise, your data may be incomplete or corrupt. 5.