Instruction Manual

18 19
Installing JSUM (Continued)
3. Read the software license agreement and accept the terms. Click Next.
4. Select the path to install JSUM and click Next. It is recommended that
you use the default folder or a location where other Jeppesen programs
have been installed. If you use a different drive or folder, click Change,
then type the path or browse to the directory (folder) chosen.
5. Select a program folder and click Next.
6. If you use a SkyBound adapter, be sure to accept the device software
installation. In the XP Software Installation dialog, click Continue
Anyway. In the Vista Windows Security dialog, click Install.
7. After the program files install, select the appropriate check boxes to
place the Jeppesen Services icon on your desktop, and launch JSUM
immediately and during startup. Click Next.
8. Click Finish.
Your JSUM installation is complete. Return to page 6 to complete JeppView
installation, or use the steps below to update your MFD data card or media
and complete the JeppView installation.
What You Need to Update MFD Charts
To copy terminal chart data to your MFD hardware data card, you need
the following:
• Appropriate Media Adapter and Media compatible with your MFD system:
- Iomega Zip
®
250MB USB-Powered External Drive with a 250MB Zip Disk
- USB Flash Drive (only applicable with Avidyne EX5000 units with
revision 6 and EX500 with revision 3 or later)
- Secure Digital (SD) Reader/Writer and SD card
- Compact Flash (CF) Reader/Writer and CF card
• Avidyne CMAX Users: Register at http://www.myavidyne.com before
starting the following procedures. To do so, you need your Avidyne MFD
hardware 8-digit serial number found on the EX500 or EX5000 Setup or
Aux screen. During the programming phase to the datacard, you will
receive information on how to retrieve the CMax Key Code and enter it.
• Internet connection
JSUM Login
After the JSUM installer finishes, log in to JSUM on your computer.
You must have an Internet connection the first time you log in:
1. Establish an Internet connection.
2. If JSUM did not open automatically when the JSUM installer ended,
click Start > Programs > Jeppesen Services > Jeppesen Services, or click
the Jeppesen Services icon on your desktop (if you chose to create one).
3. When the JSUM login dialog opens, enter your current username
and password if you are an existing customer, or the username and
password you received when you ordered JeppView MFD. This is also
your username and password for www.Jeppesen.com.
After login, the system checks that the Jeppesen servers are online, verifies
that you have the most recent version of the application, and downloads a
list of all your subscribed data services.
Updating Your Media
The following instructions assume that you installed the terminal chart
data on your hard drive during the JeppView Disc 1 installation, and that
you are logged into JSUM.
1. Ensure that your media adapter is connected to the computer and the
correct media is inserted.
2. Select your chart data service from the JSUM service list and click
Start. If you completed the JeppView Disk 1 installation, JSUM displays
“100%” in the Download Progress column because the charts have been
loaded and saved in JeppView.
3. The service dialog opens with your adapter and media drive displayed.
If the adapter and media were not found, click Browse to locate the
adapter and media. If you are unable to locate the media, verify the
connection, and review the troubleshooting section in the JSUM Help file.