User's Guide Jeppesen 55 Inverness Drive East Englewood, CO 80112-5498 1-800-621-5377 Western Hemisphere 303-328-4274 Fax 303-328-4153 Eastern Hemisphere +49 6102 5070 Fax +49 6102 507999 http://www.jeppesen.
Table Of Contents Welcome ............................................................................................................ 13 JeppView Recommended Use ................................................................................... 15 Legal Notices ............................................................................................................. 15 Your Records .............................................................................................................
JeppView User's Guide What You Need ........................................................................................ 49 Creating a Master Image ........................................................................... 50 Installing Electronic Chart Data Disc 1 ......................................................... 50 Installing Electronic Chart Data Disc 2 ......................................................... 52 Upgrade Procedures ...........................................................
Table Of Contents ToolTips .....................................................................................................................83 Airport List Features ................................................................................................... 84 RoutePack Overview.................................................................................................. 85 Multiple Select........................................................................................................
JeppView User's Guide Navigational Aid Information .................................................................... 119 Working with User-Defined Waypoints ..................................................................... 120 Placing a User-Defined Waypoint on the Enroute Chart ................................ 120 Modifying a User-Defined Waypoint........................................................... 121 Showing and Hiding User-Defined Waypoints .............................................
Table Of Contents Airport List Overview ................................................................................................ 133 Sorting by Column Heading...................................................................... 134 Resizing Columns ................................................................................... 134 Moving Columns ..................................................................................... 134 Sorting by Distance ........................................
JeppView User's Guide High Quality Mode Terminal Chart Display ................................................. 166 Navigating in the Terminal Charts View.................................................................... 166 Scrolling ................................................................................................ 167 Zooming ................................................................................................ 167 Zooming to a Preset Terminal Chart Section.....................
Table Of Contents Setting the Chart Types for Departure, Destination, and Alternate Airports .... 198 Applying Chart Type Filters to Existing RoutePacks, Routes, and Airports ....... 200 Resetting To the Default Filter Settings ..................................................... 201 Setting the Chart Types for Other Airports ................................................. 201 Manually Selecting Terminal Charts in Your RoutePack ..........................................
JeppView User's Guide Revision Letters and Update Letters ........................................................................ 220 Examples............................................................................................... 221 Printing a Revision Letter ......................................................................... 221 Printing an Update Letter ......................................................................... 222 Jeppesen Paper for Printing Terminal Charts ..............
Table Of Contents ToolTips ................................................................................................................... 241 Conversions ............................................................................................................. 241 Options .................................................................................................................... 242 Display Tab ............................................................................................
Welcome Select any topic in the Table of Contents window or enter specific terms into the Index search to view the pages that reference that subject. The following links direct you to JeppView’s main features: • View the JeppView / JeppView FliteDeck Tutorial, click Help > Interactive Training. • Locate terminal charts for an airport, see Working with Terminal Charts. • View Chart NOTAMs, see NOTAMs. • Print a revision letter, see Revision and Update Letters.
JeppView Recommended Use JeppView provides the capability to view and print Jeppesen terminal charts and enroute maps from a desktop or portable computer. It is intended for use in the ground environment. Jeppesen recommends printing the charts that you need prior to flight.
JeppView User's Guide unless such copies or derivative works are solely in the form of machine-executable object code generated by a source language processor. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NONINFRINGEMENT.
Legal Notices Xalan - Copyright © 2007-2010 Jeppesen. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
Your Records We suggest you record your serial number on this page for safekeeping. You may need to provide your serial number and customer number when calling customer service or technical support. It may also be useful in the future to have your Site Key and Site Code available.
What's New in This Version Version 3.7.2, Released JULY, 2010 Fixes Terrain Overlay Fix for terrain overlay problem in 3.7.1 update. Version 3.7.1, Released JULY, 2010 Fixes Terminal Chart Update Fix for (terminal chart installation/ update runtime and ".dll not found" errors related to daylight savings time. Version 3.
Version 3.6.2, Released JANUARY, 2009 Fixes Airport Diagrams Fix to worldwide airport diagram display. Version 3.6.1, Released AUGUST, 2008 Fixes Tower Frequencies The tower frequency labels were fixed. UpdatePacks A problem with Updatepacks misreading NavData cycles and including text was corrected. Version 3.6.0, Released JUNE,2008 New Features and Improvements Microsoft Windows Vista The release of version 3.6 incorporates two changes: o Settings previously stored in the [application].
Index License Agreements Avidyne Files Updated the JeppView and NavSuite License agreement to acknowledge that Jeppesen uses Australia Air Services data. To view the agreement, click Help > License Agreement. Updated the Avidyne Extractor with new Avidyne files. Fixes Printing a Revision Letter Fixed an application crash when printing a Revision Letter for a RoutePack containing previously and currently updated charts. Version 3.5.
Text Information Text pages are now provided in XML format rather than PDF which makes searching and accessing both IFR and VFR information much easier. You can search keywords, bookmark pages, zoom and scroll to quickly find text-based information. If you have a European VFR subscription, the text for the Bottlang Airfield Manual becomes available. Recommended Topic: Viewing the Text Pages Favorite Airports Modified the Favorite Airport column in the Airport List.
JeppView User's Guide Terminal Chart Filters Moved the terminal chart check boxes that were previously in the Airport List window to the Filter button in the Airport List window. Recommended Topic: Terminal Chart Filters Routing Techniques Added and fixed some auto routing techniques that can be used in the RoutePack Wizard. Recommended Topic: RoutePack Wizard Fixes Opening RoutePacks with Explorer Repair Function Enroute Chart Data Fixed a program crash when opening a RoutePack from Explorer.
Using the Help File The JeppView help file is one of many sources to help you learn JeppView. Besides this help file, you may also want to look at the following sources of information: • A JeppView and JeppView FliteDeck tutorial is available by clicking Help > Interactive Training. • A JeppView User's Guide is available by clicking Start > Programs > Jeppesen > JeppView3 > JeppView3 User's Guide. The User's Guide is formatted in a Portable Document Format (PDF) and may be printed easily.
JeppView User's Guide • Blue or underlined text links to other Help pages, additional information and Internet addresses related to that topic. Click the text to view additional information. • Click on the blue bold text to view additional information about a topic. • Use the Back button at the top of your browser to return to previously-visited topics, or the Forward button to return to the present topic after using the Back button.
Installation and Activation These instructions cover installation of JeppView and FliteDeck. These programs are designed to work together, but they do not need to be installed on the same computer. Your JeppView/JeppView FliteDeck license allows you to install any combination of these two programs on up to four separate computers. • You may wish to install JeppView on a desktop computer for planning. • And install FliteDeck on a Tablet PC to take in the aircraft.
JeppView User's Guide these requirements, Jeppesen cannot guarantee that the program will run properly unless the system meets these requirements.
Installation and Activation Free Hard Drive Space* (U.S. 48 State Coverage) JeppView: 2.0GB JeppView FliteDeck: 2.1GB Both: 2.2GB Higher than the minimum requirement (Europe IFR) JeppView: 2.0GB JeppView FliteDeck: 2.0GB Both: 2.15GB Higher than the minimum requirement (Europe VFR) JeppView: 2.0GB JeppView FliteDeck: 2.1GB Both: 2.2GB Higher than the minimum requirement (Worldwide IFR and VFR Coverage) JeppView: 2.5GB JeppView FliteDeck: 2.55GB Both: 2.
JeppView User's Guide NavSuite Global Free Hard Drive Space NavSuite Global consists of JeppView, JeppView FliteDeck, and JetPlanner. Requirement Minimum* Recommended USA - 48 States 580 MB 1.7 GB Europe 550 MB 1.7 GB Worldwide 875 MB 2.75 GB NOTE The figures above are estimates, as the data varies across update cycles. * Minimum Requirements are for no installation of the optional data from the Program and Electronic Chart Data CDs.
Installation and Activation • Electronic Chart Data (ECD) Disc 2 — Contains program updates to JeppView and FliteDeck, Jeppesen aeronautical data, and the text information in the Jeppesen Airway Manual and the Bottlang Airfield Manual. This data is updated every 14 days. Install it after the ECD Disc 1 installation and update the data through the Internet.
JeppView User's Guide Administrators: Access is denied. The local group properties cannot be edited or viewed at this time." If you are trying to install JeppView on a corporate computer, please contact your network administrator for administrative permission. Windows Vista If you do not have administrative permissions on Windows Vista, you will receive the following message when attempting to install or update JeppView: If this occurs, you need to elevate your status with administrative permissions.
Installation and Activation When using the Compatibility mode feature, Windows Vista redirects some files and folders to other areas of your computer. For instance, if you are a standard user and cannot write to the C:\Program Files folder, it will redirect the files and place it in the C:\Users[User Profile] folder. Windows Vista gives the application its own private copy of the file in the user's profile, so the application will function properly.
JeppView User's Guide RoutePack files (.rpk) UpdateClient.exe C:\Jeppesen\Common\ RoutePack C:\Users\[user profile]\Jeppesen\ Common\RoutePack C:\Jeppesen\JeppView3 C:\Program Files\Jeppesen\JeppView3 * Depending on your computer setup, files might also be placed in the [root]:\Program Files\Jeppesen\ folders. Hidden folder To view hidden folders, see Backup and Recovery. Standard Installation The following instructions are for standard installation on a computer.
Installation and Activation IMPORTANT Accept the license agreement. Because JeppView is designed to be used on a combination of home, office, laptop, and aircraft computers, the license agreement allows you to install the JeppView and FliteDeck components on various combinations of up to four computers for your own personal use. Under no circumstances should this software be used by more than one person at the same time. 4.
JeppView User's Guide The first installation of JeppView requires ECD Disc 1 and 2. Thereafter, update the data every 14 days through the Internet or with the CD updates received in the mail. To install your terminal charts, follow these steps: 1. Insert ECD Disc 1 into your computer CD-ROM drive. If the setup program doesn’t start automatically, browse to your computer CD-ROM drive and double-click setup.exe. 2. If you deactivated a JeppView 3 serial number, enter your new serial number and click Next. 3.
Installation and Activation 1. If you haven’t already done so, insert ECD Disc 2 into the CD-ROM drive. If the setup program doesn't start automatically, browse to your computer CDROM drive and double-click setup.exe. 2. Click Next after the welcome screen appears. 3. JeppView MFD Users Only: If you do not have FliteDeck installed, the installer gives you the option to install it. If given the option and you want FliteDeck, select the span class=Bold>Install FliteDeck check box and click Next. 4.
JeppView User's Guide mail, you will receive two Electronic Chart Data Discs. Install Electronic Chart Data Disc 1 and 2 on the server: • Electronic Chart Data (ECD) Disc 1 — Contains Jeppesen terminal chart data and is updated every 14 days. • Electronic Chart Data (ECD) Disc 2 — Contains program updates to JeppView and FliteDeck, Jeppesen aeronautical data, and the textual information in the Jeppesen Airway Manual and the Bottlang Airfield Manual. This data is updated every 14 days.
Installation and Activation C. To set a user limit other than the default Maximum Allowed, click Allow this number of users and specify the maximum number of concurrent users. D. To specify which users may access the shared folder, click Permissions. E. Select the users or groups of users who will have access to JeppView. F. Under the Allow column, select the Change and Read check box for each user or each group of users accessing JeppView. G. Click OK to return to the previous screen. H. Click OK. 2.
JeppView User's Guide D. In the Folder text box, enter \\\Jeppesen where servername is the name of the server where you installed the JeppView program. E. Select the Reconnect at logon check box. F. Click Finish. You should now be able to access your network drive. 3. Start JeppView on the client. 4. Read the message that appears about using a network drive instead of a network path, and then click OK. 5. JeppView shuts down and attempts to launch the NetworkCorrectionUtility.
Installation and Activation 8. Specify the network drive that contains the server JeppView3 executable. (Z:\, where Z is the network drive). This location is on the server and not on the local machine. 9. Click Next to complete the installation. 10. Repeat steps 2 through 8 for each client. Initial Server Installation Insert the JeppView program disc into the CD-ROM drive on your server. The installer will guide you through the following steps and procedures: 1. In the JeppView Welcome screen, click Next.
JeppView User's Guide After the ECD Disc 1 is installed, place ECD Disc 2 into the CD drive. ECD Disc 2 contains updates to JeppView, Jeppesen aeronautical data, and the text for the Jeppesen Airway Manual and the Bottlang Airfield Manual. If the setup program does not start automatically, click Start > Run. Type d:\setup.exe (where d: is the letter of the CD-ROM drive). 1. Click Next after the welcome screen appears. 2. Review the installation summary, and then click Next. 3.
Installation and Activation 3. To set a user limit other than the default Maximum Allowed, click Allow this number of users and specify the maximum number of concurrent users. 4. Click Permissions. 5. Select users or groups of users whom you want to grant access to JeppView. 6. Under the Allow column, select the Change and Read check box for each user or groups of users accessing JeppView. 7. Click OK to return to the previous screen. 8. Click OK.
JeppView User's Guide Activating JeppView on the Server To receive electronic updates, you must activate JeppView on the server. After JeppView is installed: 1. Click Start > Programs > Jeppesen > JeppView3 > JeppView3 or click the Jeppesen JeppView icon on the desktop. 2. Follow the prompts on the JeppView activation installation windows. See also Activating JeppView. 3. After JeppView has been activated, click File > Exit. Client Installation On each client system: 1.
Installation and Activation E. Select the Reconnect at logon check box. F. Click Finish. You should now be able to access your network drive. NOTE If the server is using Microsoft Windows Vista, repeat step 1 to map to the network share of the terminal charts and text data. 2. On the client machine, insert the JeppView program CD into the CD-ROM drive. Click Cancel if the installer starts. 3. Double-click My Computer. 4. Right-click the drive containing the program CD and choose Explore. 5.
JeppView User's Guide 6. Double-click JeppViewNetworkSetup.exe. 7. Click Next to start the installer. 8. Read the License Agreement, and then click Yes to install. 9. Enter the same serial number that you used to install JeppView on the server. This must be the same serial number. 10. Read the installation summary and ensure you have completed all of the steps listed before continuing, and then click Next. 11. Click Yes or No when asked if the server is using Windows Vista.
Installation and Activation See JeppView Revisions for information on updating your data electronically after the initial installation. Depending on the expiration date of the data on the CD, you might need to update your data soon after installing JeppView. You need to update the data only on the server; not on the client machines.
JeppView User's Guide B. Right-click New Key #1 and choose Rename. C. Rename the subkey to ItssRestrictions. 3. Right-click ItssRestrictions and choose New > DWORD Value. 4. Enter MaxAllowedZone, and then press ENTER.
Installation and Activation 5. Right-click MaxAllowedZone and choose Modify. 6. In the Value data text box, enter 1, and click OK. 7. Click File > Exit to close the Registry Editor. If this solution does not work for you, please visit http://support.microsoft.com/kb/896358 for alternatives. Workstation Imaging These instructions cover the installation of JeppView when using an imaging process such as Symantec™ Norton Ghost™ or Acronis True Image™ to deploy the application on additional computers.
JeppView User's Guide • Imaging software such as Symantec™ Norton Ghost™ and Acronis True Image™. • JeppView Program CD. • Electronic Chart Data (ECD) Disc 1. • Electronic Chart Data (ECD) Disc 2. Creating a Master Image To create an image with JeppView, install the program CD only. After the program CD is installed, you can continue with imaging the system for other workstations. 1. Insert the Program CD into your computer CD-ROM drive. The Installation Wizard appears.
Installation and Activation 2. Check for the terminal chart coverages that you have purchased under your serial number, and click Next. A. The first time you install the ECD Disc 1 on a given computer, you might not see any coverages. If that occurs, a box appears near the bottom of the Setup window for entering a coverage code. B. Type the coverage codes from the back of your JeppView CD album (below the Serial Number), and then click Apply. NOTE Coverage codes change with each terminal chart cycle.
JeppView User's Guide 3. After the update is complete, the installer automatically closes. Continue with Installing ECD Disc 2 to update your enroute data and any program updates that might be available. If you did not receive a serial number or coverage code, please contact Jeppesen Customer Service. If you need to navigate outside your current coverage area, you can expand your coverage instantly by contacting Jeppesen and purchasing additional coverage codes.
Installation and Activation Currently Installed What You Need Change To • NavSuite IFR • JeppView • FliteStar IFR JeppView 3.x (Standard) • • NavSuite Global • JeppView • JetPlanner Global • JetPlan.com • • • JeppView 3.x (Standard) and any FliteStar or FliteMap version (VFR, IFR, or Corporate) • • NavSuite IFR • • Procedure NavSuite IFR or Global Serial Number Coverage Code NavSuite Program CD NavSuite Electronic Chart Data Disc 1 NavSuite Electronic Chart Data Disc 2 1.
JeppView User's Guide need. View the FliteStar Help file regarding files to backup. 4. Insert the NavSuite Program CD and follow the installation process. 5. When the installer asks about overwriting the existing applications , click Yes. • JeppView 3.x (Standard) • JeppView for MFD • • 54 JeppView MFD Serial Number Coverage Code Electronic Chart Data Disc 1 Electronic Chart Data Disc 2 1. Do not uninstall your current subscriptio n. 2. Deactivate JeppView. 3.
Installation and Activation • • JeppView MFD JeppView 3.x (Standard) • • • • JeppView MFD NavSuite IFR or Global • • • JeppView Serial Number Coverage Code JeppView Program CD Electronic Chart Data Disc 1 Electronic Chart Data Disc 2 1. Do not uninstall your current subscriptio n. 2. Deactivate JeppView. 3. Insert the JeppView Program CD. 4. In the Program Maintenanc e dialog box, select Modify, and then click Next. 5.
JeppView User's Guide • Electronic Chart Data Disc 1 NavSuite Electronic Chart Data Disc 2 files you might need. 4. Insert the NavSuite Program CD and follow the installation process. 5. When the installer asks about overwriting the existing application, click Yes. • JetPlanner (depending on your NavSuite version) • JetPlan (depending on your NavSuite version) • Jeppesen Services Update Manager (JSUM) Uninstall JSUM separately if you no longer need it. See the JSUM Help file for information.
Installation and Activation 2. The Activation Wizard appears for first-time users. Click Next to activate JeppView on this computer. 3. In the Site Key Method dialog box, select the method to activate JeppView. • If you are connected to the Internet, select From the Internet (automated) and click Next and complete activation.
JeppView User's Guide • To contact Jeppesen by phone to activate JeppView, select Contact Jeppesen by phone, then: A. Call the phone number listed for your area to obtain your site key. B. Enter the site key in the field provided. • To manually connect to the Jeppesen web site to activate JeppView: A. Select Use the Jeppesen Web Site and click Next to complete activation. B. Open your web browser, then copy and paste the Jeppesen web URL into the browser's address line or click www.jepptech.
Installation and Activation D. Copy and paste the product serial number and the site code from the Activation Wizard dialog box into the Jeppesen Site Key page. Then click Get Site Key. E. The Jeppesen Site Key web page now shows you the Site Key. Copy this into the Activation Wizard Enter Site Key dialog box. Click Next to complete the site activation. NOTE The message Unable to activate with given site key is caused by not being logged into Windows under an administrator account.
JeppView User's Guide Adding Terminal Chart Coverages You can view a graphical representation of your coverage areas as well as add coverage areas to your subscription by using the electronic update feature or the Electronic Chart Data (ECD) Disc 1 and ECD Disc 2. Viewing Your Current Coverage Regions View the installed coverage area by doing one of the following: 60 • Click Help > Coverage Areas to open the Review/Expand Subscription dialog box.
Installation and Activation Expanding your Regional Coverage Area Contact a Jeppesen Customer Service Representative to request new coverages. You will receive a unique coverage code for each new region you add. The coverage code is required if you will be adding the new coverages with ECD Disc 1. If you are updating electronically, the coverage code is not required because the Jeppesen server will add it to your account information.
JeppView User's Guide • On the All JeppView Coverage Areas tab, enter an airport identifier and click Airport Coverages to see which coverage areas contain that airport. • Click the name of a coverage area to display the airports in that coverage on the map. Currently, this feature is only available with an ECD Disc 1.
Installation and Activation JeppView has the ability to work with standard proxy server configurations including HTTP, HTTP Tunneling, SOCKS V4, and SOCKS V5. A proxy setup might be required depending on your firewall to activate your program electronically and to electronically download JeppView updates. Contact your Systems Administrator if you are unsure of the configuration. TIP Check the Internet Explorer proxy settings to determine if your network uses a proxy server.
JeppView User's Guide 5. Enter the User Name and Password only if the proxy server requires authentication (this is fairly uncommon). 6. Select the check box associated with the desired configuration on the righthand side of the dialog box. 7. Click Close. If you are using a SOCKS proxy server that proxies all communication to the Internet: 1. Click New. 2. Select the SOCKS proxy type. 3. Enter the address:port where the SOCKS proxy resides on your network. 4. Enter the port ranging from 1-9999. 5.
Installation and Activation • Click Start > Programs > Jeppesen > JeppView3 > JeppView3. • Click the Jeppesen JeppView icon on your desktop. The first time you start either JeppView or FliteDeck on a given computer, it will prompt you to activate the program. You have 30 days to do this. Follow the instructions on the screen in Activating JeppView.
JeppView User's Guide To display the warning after selecting the Don't show this warning again check box: 1. Click Tools > Options. 2. On the Warning tab, select the Reset All Program Warnings check box. 3. Click OK. NOTE JeppView uses your computer clock to determine your data status. Ensure your clock reflects the accurate date, time and time zone. To update your data, see JeppView Revisions. Backup and Recovery This section describes backup and recovery procedures for JeppView.
Installation and Activation To back up the files listed above: 1. Navigate to the specified folder. 2. Right-click the file name(s) and choose Copy. 3. Navigate to the folder where the file will be temporarily stored, preferably not in the Jeppesen folder. 4. Right-click a blank spot in the designated folder and choose Paste. 5. Repeat steps 1 through 4 for each file to be backed up. Recovery After installing and activating JeppView, do the following: 1.
JeppView User's Guide Windows Vista is configured to show all hidden files. Deactivating JeppView Because you may need to use JeppView on a notebook computer in addition to your desktop computer, your license agreement permits this, as long as you are the only person using the program(s). If more than one person needs to use the software, or if you otherwise need additional site keys, you can purchase them by calling Jeppesen Customer Service.
Installation and Activation If you try to reactivate JeppView or NavSuite on this machine after activating them on another computer, or activate the products on a fifth machine without deactivating one site key, you will receive a message from the server that your site key limit has been exceeded. To purchase and activate additional installation of JeppView or NavSuite, please contact Jeppesen Customer Service.
Keeping Your Programs Up-to-Date Your JeppView service includes a one-year subscription where you can download updates for JeppView and FliteDeck, Jeppesen terminal charts, enroute data and text information. If you are interested in receiving CD updates in the mail, please contact a Jeppesen Customer Service Representative for information and pricing. Jeppesen provides a 10-week grace period in which to update your Electronic Chart Data.
JeppView User's Guide CD Updates You can receive updates to your JeppView enroute chart data, terminal chart data, electronic text pages and program updates electronically as well as on CD-ROM. If you subscribe to a CD revision service, you will receive the following CDs every 14 days: • Electronic Chart Data (ECD) Disc 1 — This disc contains IFR and European VFR terminal chart data.
Using the Enroute Chart connection. Check your current version number and data effective dates by selecting Help > About JeppView. The About JeppView dialog box contains your serial number, program version, and information about your data (effective dates, coverage area, expiration dates, and cycle/disk number). You might want to check to see if your data is still current before checking for updates; however it is not necessary.
JeppView User's Guide 7. If you have downloaded a JeppView update in the past, a message appears asking if you would like to delete all downloads older than ten days.
Using the Enroute Chart 9. Follow the prompts on the remaining installation windows. If the download is interrupted for any reason, JeppView commences downloading at the point it stopped when reconnected. NOTE Download options are active only if you do not have current enroute chart data, the most recent terminal chart revision cycle, the newest program version of JeppView, or updated electronic text pages. All of these updates are available on CD as well.
JeppView User's Guide 1. Click Start > Programs > Jeppesen > Create UpdatePack. 2. Select the items that you want to add to the UpdatePack. The disk space requirements appear in the bottom of the window. If the selected products size seems over-large, check for older updatepacks in the directory and delete them. 3.
Using the Enroute Chart 3. Double-click the UpdatePack executable (example: 092007-UpdatePack.exe). The UpdatePack dialog box appears with the following tabs: • Welcome — Displays the status of the data on the target computer, compared to the data in the UpdatePack. • This UpdatePack — Displays the contents of the UpdatePack file with the update cycle. • This Computer — Displays information about the Jeppesen programs on the target computer, and which update cycle is installed.
JeppView User's Guide See: Displaying Terminal Chart Changes Revision Letters and Update Letters An Update letter differs from a Revision Letter in these ways: • An Update Letter lists what has changed since you last printed your RoutePack. • A Revision Letter lists what has changed between the last data cycle and the current data cycle. • When you print a RoutePack, a baseline print date is set for the charts.
Using the Enroute Chart • • Select the item: o in the RoutePack List, click File > Print > Print [RoutePack] or [route] o in the Airport List, click File > Print > Print [airport] Select the item: o in the RoutePack List, click the Print toolbar drop-down arrow, and choose Print [RoutePack] or route o in the Airport List, click the Print toolbar drop-down arrow, and choose Print airport 2. In the Print dialog box, select the Revision Letter check box.
JeppView User's Guide 7. Right-click an airport, and choose Print from the shortcut menu. 8. In the Printing dialog box, select the Revision Letter check box, and then click Print or Print Preview. To print only terminal charts that have changed since the last Jeppesen update cycle along with the revision letter, select the Revision Letter and Only Changed Charts check boxes. Printing an Update Letter Update Letters can only be printed as part of a RoutePack.
Using the Enroute Chart JeppView Tour Now that you have installed and activated JeppView, this chapter describes the basics of how to use the program. Although each of the following chapters focuses on specific functionality within JeppView, a thorough understanding of this section is important to getting the most out of the program. Your JeppView program also includes a computer-based (CBT) tutorial. To use the tutorial, click Help > JeppView3 Interactive Training.
JeppView User's Guide The main JeppView window appears on the right with five view tabs across the top. Each tab displays a different view in the main JeppView window. Click a tab to access the set of information or features in that view. JeppView opens to the Enroute Charts View; when this view is zoomed out, your coverage area is outlined with a black line (unless you have worldwide coverage).
Using the Enroute Chart To disable the Tip of the Day: • Clear the Show tips at StartUp check box, or • Click Help > Tip of the Day, and clear the Show Tips at StartUp check box. To reactivate the Tip of the Day: Click Help > Tip of the Day, and select the Show Tips at StartUp check box. ToolTips ToolTips are popup information boxes for particular objects in the Airport List, RoutePack List and dialog box fields. To display a ToolTip, point to an object for at least one second.
JeppView User's Guide Airport List Features The Airport List contains all the airports with terminal charts available in your JeppView coverage area. The Airport List is the primary method for working with your airports and their respective terminal charts. Open and close the Airport List by clicking View > Airport List or pressing CTRL+SHIFT+L. A check mark next to the menu command indicates that the list is currently displayed. Click to add or remove the check mark, and hide or show the list.
Using the Enroute Chart RoutePack Overview A RoutePack is like an electronic briefcase that contains flight information for one or more routes with their associated airport and terminal charts, as well as a collection of commonly used airports, charts, and routes. RoutePacks can be saved, unloaded, and loaded back into JeppView for future use. JeppView offers you the flexibility to create RoutePacks that accommodate your specific charting needs.
JeppView User's Guide Use the keyboard to select a sequential range of items, a non-sequential range, or all items on an Airport List or RoutePack List. To select a range of items: 1. Click to select an item. 2. Hold the SHIFT key, and then click another item on the list. All items in between the two selections are selected. To select non-consecutive items: 1. Click to select an item. 2. Hold the CTRL key, and select additional items in the list.
Using the Enroute Chart Your comment appears in the main Notebook with a time and date stamp. You can also add comments directly into the Notebook, but without clicking Add Note, these comments do not include a date and time stamp. • New opens a different Notebook file. JeppView prompts you to name the file before continuing. Type a name for your new Notebook and click OK. JeppView clears the old Notebook and displays a blank page. • Open enables you to view an existing saved Notebook.
JeppView User's Guide JeppView displays three preset toolbars by default: Standard, Chart, and Preferences. You can arrange or move these preset toolbars on the screen to suit your preferences. You can also modify them to contain the buttons that you want, or you can hide them. In addition, you can create and delete your own toolbars. To identify a toolbar button, point to it until a ToolTip displays its name.
Using the Enroute Chart Previous View — Similar to the Back button in a browser, Previous View navigates in reverse through previously viewed locations and zoom levels. Next View — Similar to the Forward button in a browser, Next View navigates forward to display previous locations. (This button is active only after the Previous View button has been used.) Zoom In — Zooms in one level. Zoom Out — Zooms out one level.
JeppView User's Guide This toolbar is active only for the Enroute Charts View. The buttons listed below hide or show items on the enroute chart.
Using the Enroute Chart Holding Patterns Obstacles — Available in the Default theme and Euro VFR theme (see Customizing the Enroute Chart Themes). ARTCC/FIR/UIR boundaries (Air Route Traffic Control Center, Flight Information Region, Upper Flight Information Region) Grid MORAs (Minimum Off Route Altitude) — Grid MORAs provide an obstacle clearance altitude within a lat/long grid block. Roads Railroads Cities Waterways Surface Features such as lava flows and sandbars.
JeppView User's Guide 3. Click Close to finish. Resetting a Toolbar Predefined toolbars can be reset to display in their original default configuration. Customized toolbars cannot be reset. To reset a modified toolbar to its original (predefined) state: 1. Click View > Customize Toolbars. 2. In the Modify Toolbars dialog box, click Reset. The checked toolbars display in their default location and configuration. 3. Click Close to finish.
Using the Enroute Chart The new toolbar is undocked when it appears, and is listed in the Modify Toolbars dialog box. When a toolbar is not named, only its check box appears. 7. In the Modify Toolbars dialog box, click Close. Modifying Toolbars To modify a toolbar: 1. Click View > Customize Toolbars. 2. In the Modify Toolbars dialog box, select the appropriate toolbar and click Modify. 3.
JeppView User's Guide You can delete only customized toolbars. To delete a customized toolbar: 1. Click View > Customize Toolbars. 2. In the Modify Toolbars dialog box, select a customized toolbar and click Delete. The system removes the deleted toolbar from the screen and from the toolbar list. 3. Click Close. Arranging List Windows and Toolbars Toolbars, as well as the Airport and RoutePack List windows, can be arranged in the application based upon your preference.
Using the Enroute Chart The toolbar automatically docks when moved to the edge of the screen. Hiding a Toolbar To hide or close a floating toolbar, click the X in the top right corner of the toolbar. To view a hidden toolbar: 1. Click View > Customize Toolbars 2. Select the toolbar’s check box. List Windows The Airport List and RoutePack List can be undocked, docked, hidden, resized and moved to different positions on the screen.
JeppView User's Guide Docking the List Window To dock a list window in its original location, do either of the following: • To keep the same size, double-click on the title bar. • To place the list windows in the default location with the default size, click View > Reset List Windows. This will also place the enroute chart at the default location. If you want to dock a list window at a new location: 1. Click and hold the mouse button on the double bars of the list window. 2.
Using the Enroute Chart If you want to reduce or expand the size of a list window: 1. Undock the list window (see Undocking a List Window). 2. Place your pointer over a corner of the list window. When the double arrow appears, click and hold the mouse button. 3. While holding the mouse button, adjust the size of the window. 4. When the list window is at the desired size, release the mouse button. 5. If desired, dock the list window by double-clicking on the title bar.
JeppView User's Guide Right-click menus throughout the program provide easy access to many JeppView features for Airport List and RoutePack List windows, RoutePacks, routes, airports, Enroute Chart and Terminal Chart Views, and some enroute chart objects (airports, routes, boundaries, and navaids). Although many of these features are available from the main menu, right-click menus are sometimes faster and easier to use.
Using the Enroute Chart Find Approach Charts Locates the airport in the Airport List. (Available only when the waypoint is an airport.) Add [Airport] Adds the selected airport and all its currently filtered Terminal Charts to charts to the RoutePack Other Charts folder. (Available [RoutePack]: Other only when the waypoint is an airport.) Charts Center On Show Approaches Within Centers the chart view on the selected object.
JeppView User's Guide To open the right-click menu for waypoints on a route in the Enroute Chart View, click any waypoint (airport or navaid) in the view window. When selected, the waypoint color changes to magenta. Add Alternate Route Center On Displays the Route Properties dialog box, used to create an alternate route from the selected waypoint. Centers the chart view on the selected waypoint. Land/Don’t Land at Airport Only available when the waypoint is an airport.
Using the Enroute Chart Use view as Geographic Area Filter Favorite Views Filters the Airport List to display only airports shown within the selected Enroute Charts View. Displays a submenu of favorite chart locations and views. Vector Chart Themes Displays a submenu of predetermined chart themes. Reset Theme Defaults Changes the chart to display the original elements designated for a particular theme. (Displays only when changes have been made to the preset themes.
JeppView User's Guide The following table briefly describes the right-click menu of a RoutePack in the RoutePack List. Keyboard shortcuts are noted in parentheses when available. For the keyboard shortcut to work, the item that would normally be right-clicked must be selected. Add Route (Wizard) Add Route (Point/Click) Save (CTRL+S) Opens the Route Wizard, which helps plan a route in a RoutePack, including departure and destination airports, as well as optional route waypoints and alternates.
Using the Enroute Chart Show Approaches Within Opens the geographic area filter dialog box. Enter a distance, and a yellow outline surrounds all the routes contained in the RoutePack. Only airports located within that filter appear in the Airport List. Reset to current Chart Type Preferences Applies the terminal chart filters set in the Detailed Chart Filter Settings dialog box. This might add or remove terminal charts from the selected route.
JeppView User's Guide The following table briefly describes the right-click menu of a route in the RoutePack List. Keyboard shortcuts are noted in parentheses when available. For the keyboard shortcut to work, the item that would normally be right-clicked must be selected. Re-Plan This Route (Wizard) Enables you to re-plan an existing route in your RoutePack using the Re-Plan Route Wizard.
Using the Enroute Chart Renumber Route Waypoints Renumbers route waypoints not associated with airports or a navaid that might have been created out of order (WP1, WP2, etc.). Recommended Topic: Renumber Route Waypoints Cut (CTRL+X) Removes the route and places it onto the clipboard. Copy (CTRl+C) Creates a copy of the route and places it on the clipboard. Paste (CTRL+V) Adds the contents of the clipboard to the route. Airports, terminal charts, and routes can be pasted into a route.
JeppView User's Guide The following table briefly describes the right-click menu for an airport in the RoutePack List. Keyboard shortcuts are noted in parentheses when available. For the keyboard shortcut to work, the item that would normally be right-clicked must be selected. Reset to Chart Type Preferences The first command in the menu changes depending on the airport podition in the route - departure, enroute waypoint, destination, alternate, or other airport.
Using the Enroute Chart Find Approach Charts Displays the airport at the top of the Airport List and expands its terminal chart list. Opens the geographic area Filter Setup dialog box. Enter a Show Approaches distance and a yellow outline circles the airport with the Within radius you specified. Only airports located within that area appear in the Airport List.
JeppView User's Guide Inserts a terminal chart from the paste buffer in sequence before the Paste selected chart. (A terminal chart can be pasted inserted under the airport with which it is associated). Delete Removes the terminal chart from the airport. Print Opens the Print dialog box allowing you to print the selected terminal charts. RoutePack Other Charts Right-Click Menu The following table briefly describes the right-click menu of the Other Charts folder in the RoutePack List.
Using the Enroute Chart Alternate Route Right-Click Menu The following table briefly describes the right-click menu of an alternate route in the RoutePack List. If a keyboard shortcut is available for an action, it will be annotated in parentheses. For the keyboard shortcut to work, the item that would normally be right-clicked must be selected. Re-Plan This Route (Wizard) Enables you to re-plan an existing alternate route in your RoutePack using the Re-Plan Route Wizard.
JeppView User's Guide Renumber Route Waypoints Cut (CTRL+X) Copy (CTRl+C) Renumbers the alternate route waypoints not associated with airports or a navaid that might have been created out of order (WP1, WP2, etc.). Recommended Topic: Renumber Route Waypoints Removes the alternate route and places it onto the clipboard. Creates a copy of the alternate route and places it on the clipboard. Paste (CTRL+V) Adds the contents of the clipboard to the alternate route.
Using the Enroute Chart parentheses. For the keyboard shortcut to work, the item that would normally be right-clicked must be selected. Copy (CTRL+C) Print Add to Favorites Creates a copy of the airport in the Clipboard. If more than one airport is selected, the system copies all selected airports (and all accompanying terminal charts) and makes them available to paste into a RoutePack. Opens the Print dialog box allowing you to print the terminal charts associated with the selected airport.
JeppView User's Guide Using the Enroute Chart The vector chart you see when you first open JeppView is a computer-generated map drawn from tabular information in several databases. The charts included with JeppView should not be used as a sole means of navigation. Vector charts offer fast rendering, continuous zooming, feature display selection, and easy updates to NavData. An example of JeppView's built-in Default theme vector chart with terrain appears below.
Using the Enroute Chart • Customizing the Enroute Chart Themes • Enroute Chart Projections • Using Enroute Chart View Filters • Setting a Default Display • Creating a Favorite View • Thumbnail • Graphic Scale and Terrain Legend Enroute Chart Objects Chart objects are features that display on the Enroute Chart view window.
JeppView User's Guide Find Approach Charts Locates the airport in the Airport List. (Available only when the waypoint is an airport.) Add [Airport] Adds the selected airport and all its currently filtered Terminal Charts to charts to the RoutePack Other Charts folder. (Available [RoutePack]: Other only when the waypoint is an airport.) Charts Center On Show Approaches Within Centers the chart view on the selected object.
Using the Enroute Chart • Use the mouse wheel (if available). You can access a setting for the mouse wheel by clicking Tools > Options. In the Display tab, clear the Mouse wheel zoom check box. Zooming the Chart To zoom in and out on the enroute chart, do any of the following: • Right-click the enroute chart and choose any of the following: o Zoom In o Zoom Out o Full Zoom Out • Click the Zoom In or Zoom Out button on the Chart toolbar. • Press the PLUS (+) or MINUS (-) KEY.
JeppView User's Guide Keyboard Press the PLUS key (+) and the MINUS key (-) on the keyboard to zoom in and out on a chart. Press and release the keys to zoom incrementally. The bar graph appears when holding either key down. The bar moves to a larger or smaller screen width, depending on which way you are zooming. Release the key to zoom to a particular scale. Centering On the Chart JeppView enables you to center the Enroute Charts View on a selected point, waypoint, or route.
Using the Enroute Chart To center on an airport, do one of the following: • Double-click the airport in the Airport List or the RoutePack List. • Right-click an airport on the enroute chart, the Airport List, or the RoutePack List and choose Center On. Previous and Next View The Previous View and Next View features, available for the Enroute Charts and Terminal Charts Views, enable you to navigate through previously viewed locations and zoom levels—similar to the Back and Next buttons in a web browser.
JeppView User's Guide Use question marks (?) to include a wildcard in your entry. For example, River?i returns Riverside, Riverview, and so on. 4. Select the match you want from the list. 5. Click Close when you are finished with the Search. Several other options are available in the Search dialog: • Locate centers the chart view on the waypoint location with a blinking red arrow that points to the object. • Append adds the object to the end of a route.
Using the Enroute Chart To select a chart object, click that object on the enroute chart. It turns pink. To view more information about a chart object, right-click the selected object and choose Properties. If you click the chart where two or more items are collocated, the Select an Item dialog box appears. Select the desired item and then click OK. To display the item’s Properties dialog box, click Info.
JeppView User's Guide NOTE Navaid information cannot be modified. Use the Notebook tab to add comments. Working with User-Defined Waypoints User-defined waypoints enable you to define waypoints in a route or to mark locations of interest on the chart. They can be set, modified, hidden or shown, and deleted.
Using the Enroute Chart 1. Activate the Set Waypoint function by doing either of the following: • Click Tools > Drop User-Defined Waypoint. • Press CTRL+M. The mouse pointer changes to a waypoint symbol. 2. Click in the enroute chart view to open the waypoint Properties dialog. 3. In the waypoint Properties dialog box, set the following characteristics: • Latitude and Longitude — Modify the latitude and longitude coordinates to change the location of the waypoint or locate it more precisely.
JeppView User's Guide 1. Open the Properties dialog box by doing either of the following: • Right-click the waypoint in the Enroute Charts view or RoutePack List and select Properties. • Click Edit > User-Defined Waypoints, select the desired waypoint in the User-Defined Waypoint dialog box, and click Properties. 2. Change any of the fields in the waypoint Properties dialog box, and then click OK. To change only the location of a waypoint, select it on the enroute chart and drag it to a new location.
Using the Enroute Chart Electronic Ruler The electronic ruler enables you to measure the bearing and distance between points on the enroute chart. When active, JeppView draws a line from the starting point to the pointer position with bearing, distance and terrain elevation. In the example below, note the following: • 024T indicates the true bearing. • 035M indicates magnetic bearing. • 23.79 NM indicates the distance along the ruler.
JeppView User's Guide • Right-click an open area of the Enroute Charts view, choose Vector Chart Themes, and then choose the desired theme. Customizing Themes JeppView comes with pre-set themes where certain chart elements display at specific zoom levels. You can customize a theme displayed with a set of chart objects and symbology at a specified zoom levels. To customize a theme: 1. Select the preset theme that you want to customize. 2.
Using the Enroute Chart Resetting Themes To return a theme to the JeppView settings, do either of the following: • Click Chart > Reset Theme Defaults. • Right-click in an open area of the Enroute Charts View and choose Reset Theme Defaults. The Reset Theme Defaults command does not appear in the right-click menu until changes have been made to the theme.
JeppView User's Guide 2. Click the Projection tab. 3. Choose any projection from the Projection drop-down list. Where additional parameters are shown, you can accept the default values or enter your own. 4. Click OK. Chart Projections The JeppView mapping engine is designed to display all navigation and topographic information in eight chart projections.
Using the Enroute Chart Use the Display Filters tab to limit the airports and obstacles shown in the Enroute Charts View. To filter airports and obstacles displayed in the Enroute Charts View: 1. Right-click an open area in the Enroute Charts view, and choose Properties from the shortcut menu. 2. In the chart Properties dialog box, click the Display Filters tab. Airport Filters You can filter airports according to characteristics and runway length as well as fuel and services.
JeppView User's Guide The airport filtering criteria in the Display Filters tab coordinate with the airport criteria in the Chart Preferences tab (also on the Properties dialog box) in the Nav Data category, as well as some of the buttons on the Preferences toolbar. Airports displayed in the Enroute Charts View (and controlled by the Display Filters tab on the Properties dialog box) are from the Jeppesen Electronic Chart Data, while airports displayed in the Airport List are from your JeppView subscription.
Using the Enroute Chart The default Enroute Charts View is what is displayed when you open JeppView. To personalize your chart default view: 1. Navigate to the desired location and zoom level in the Enroute Charts View. 2. Click Chart > Set Default View. This changes the default view to the current display. Displaying the Enroute Chart Default View To return from another view to your default view, do one of the following: • Click Chart > Show Default View.
JeppView User's Guide • Right-click an open area on the enroute chart, choose Favorite Views, and then choose a saved favorite view. • Click Chart > Favorite Views and choose a saved favorite view. Managing Favorite Views From the Favorites dialog box, you can add, delete, or load a favorite view. To edit the list of favorite views: 1. Open the Favorites dialog box by doing either of the following: • Right-click an open area on the enroute chart, choose Favorite Views, and then choose View Favorites.
Using the Enroute Chart • Press CTRL+E. To change the area displayed on the enroute chart using the Thumbnail, do either of the following: • Point to edge of the blue box inside the Thumbnail pane. The mouse pointer changes to a four-way arrow. Drag the box to a different place on the chart. • Point to the corner of the blue box inside the Thumbnail pane. The mouse pointer changes to a double diagonal arrow. Drag the box larger or smaller.
JeppView User's Guide Displaying and Hiding the Scale and Legend To show (or hide) the Graphic Scale or Terrain Legend, right-click an open area of the enroute chart and select (or clear) Graphic Scale or Terrain Legend. When the scale and legend appear on the enroute chart, you can also hide it by right-clicking the scale or legend and selecting Hide from the shortcut menu. Moving the Scale and Legend To move the Graphic Scale or Terrain Legend: 1.
Working with the Airport List The Airport List contains all the airports available in your subscribed coverage area and is the primary method for working with their respective terminal charts. Open and close the Airport List by clicking View > Airport List or pressing CTRL+SHIFT+L. A check mark next to the menu command indicates that it is currently displayed. Click to add or remove the check mark.
JeppView User's Guide • Favorite Airports check box • Airport Name • City, state, province or territory, and country • Distance from — appears after a distance filter is selected. Sorting by Column Heading An arrow displays beside the column heading by which the list is currently sorted. The arrow points up or down depending on whether the list is sorted in descending or ascending order. JeppView normally sorts in descending order.
Working with the Airport List Sorting by Distance The Distance from column enables you to sort airports according to distance from a selected point. This column initially becomes visible at the far right in the Airport List when you select request the distance calculation: 1. Right-click a navaid or airport on the enroute chart, RoutePack List, or Airport List. 2. Choose Show Distance From Here. The List shows the selected airport at the top, followed by airports listed from closest to farthest.
JeppView User's Guide Printing by Sort Order You can print a selection of airports from the Airport List or all the airports in the list. To print the Airport List: 1. Filter and sort the list in a way that groups the desired items together. 2. Do either of the following: • Select the airports or charts you want to print. • Press CTRL+A to select all the airports in the list. 3. To print, do any of the following: • Right-click the selection and choose Print.
Working with the Airport List Use one of the following methods to view the airport properties: • Right-click an airport in the RoutePack List, Airport List, or on the enroute chart and choose Properties. • Select an airport in the RoutePack List, Airport List, or on the enroute chart and click Chart > Properties. To view the information, click between the various tabs.
JeppView User's Guide Jeppesen Assigned Airport Identifiers In cases where European VFR airports do not have assigned ICAO identifiers, Jeppesen assigns them identifiers in the format of the two-letter country identifier followed by two numbers. The assigned airport identifier is not official and not to be used for official paperwork, such as filing a flight plan. The easiest way to find airports of this nature is to enter the airport or city name in the Search field.
Working with the Airport List Airport Search The Airport List window contains an airport search function. When you enter any portion of an airport name, identifier, city, or state in the Airport List window search field, the first airport in the list that matches the criteria appears at the top of the Airport List. Click the Next and Previous buttons to move to other matching airports. To search for an airport in the Airports List: 1.
JeppView User's Guide in the search field. In this example, search results include all airports with a city called Livingston, but do not include airports called Livingston, such as Livingston Co Airport (KOZW) in Howell, MI. Searching for European VFR Airports In cases where European VFR airports do not have assigned ICAO identifiers, Jeppesen assigns them identifiers in the format of the two-letter country identifier followed by two numbers.
Working with the Airport List • Right-click an airport in the Airport List and select Add to Favorites or Remove from Favorites. • Select an airport using the ARROW keys and then press the SPACEBAR. • To simultaneously add multiple airports, use the multiple select feature. Your favorite airport selections are saved between JeppView sessions. Sorting Favorite Airports After you have selected your favorite airports, you can sort them where they display as a group with the other airports.
JeppView User's Guide Filtering Favorite Airports Display the selected favorite airports alone where the other airports are filtered out. To display only favorite airports in the Airport List: 1. Click Filter in the Airport List window and select Airport Filter Settings. 2. In the Filter Settings dialog box, click the Airports tab. 3. In the Favorite Airports section, select the Show Only Favorite (Checked) Airports check box. 4. Click OK. The Airport List displays only your favorite airports.
Working with the Airport List Clearing the Favorite Airports Filter To clear the favorites-only filter and display the full list of airports, do either of the following: • Click Filter in the Airport List window and select Enable Airport Filter to remove the associated check mark. Use this option if you have established airport filters you would like to use often. • Click Filter in the Airport List window and select Airport Filter Settings.
JeppView User's Guide 1. Click Filter in the Airport List window and select Airport Filter Settings. 2.
Working with the Airport List To reactivate the filters, click Filter and select Enable Airport Filter once more. • Click Filter in the Airport List window and select Airport Filter Settings. In the Filter Settings dialog box, do either of the following: o Click Reset this page to remove the airport filters for the respective tab only, and then click OK. o Click Reset all pages to remove all airport filters, and then click OK.
JeppView User's Guide Right-click menus provide quick access to many JeppView features throughout the program. For Airport List items, the menu options change depending on whether you right-click: • An airport. • A terminal chart. Airport Right-Click Menu in the Airport List The following table briefly describes the right-click menu for airports in the Airport List. If a keyboard shortcut is available for an action, it will be annotated in parentheses.
Working with the Airport List Show Approaches Within Opens the geographic area filter dialog box. Enter a distance, and a yellow circle appears on the chart, centered on the selected airport, with a radius equal to that distance. Only airports located within that circle appear in the Airport List. Center On Centers the Enroute Chart view on the selected airport, marking it with a red arrow. Properties (ALT+ENTER) Opens the Airport Properties dialog box, displaying specific airport information.
JeppView User's Guide To filter airports by airport characteristics: 1. Click Filter in the Airport List window and select Airport Filter Settings. 2. Click the Airports tab 3. Select your airport filtering preferences and click OK: • Favorite Airports is a user-defined filter. Select the Show Only Favorites (Checked) Airports check box to hide all airports from the Airport List not selected as a favorite.
Working with the Airport List • Have Minimum Runway Length field displays the runway length selected from the drop-down list. You can select a length from the drop-down list or enter a new length in the length field. The Airport List displays those airports with runways as long or longer than the selected value. • Have visible terminal charts hides airports that do not have terminal charts matching the selected filtering criteria.
JeppView User's Guide • Public, Private, or Military displays one or a combination of those airport types. When two or more criteria are selected, the filters work as an “and” operation where the filtered airports meet all selected criteria. • Have These Fuel Types / Services displays only airports in the Airport List that have selected fuel or the services available. Scroll down the list to view additional fuel and service options.
Working with the Airport List • By accessing the Show Approaches Within right-click menu command from any RoutePack, route, airport, or navaid. Filtering Airports with the Geographic Area Tab In the Filter Settings dialog box, the Geographic Area tab allows you to filter airports displayed in the Airport List according to a specified location. To view the Geographic Area tab: 1. Click Filter in the Airport List window and select Airport Filter Settings. 2.
JeppView User's Guide corners. (An easier way to create a rectangular geographic filter is to use the enroute chart. See also Using the Enroute Chart view to Apply Geographic Filters. • 152 A circle centered at filters airports around a chart element. Enter the appropriate latitude and longitude center point and the radius distance. You can also select an airport or navaid on the enroute chart to set a circle filter. See also Using the Enroute Charts View to Apply Geographic Filters below.
Working with the Airport List • The A corridor of width option filters airports around a route. This is active only when a route is displayed in the Enroute Charts View. To initially set the corridor of width, do one of the following: o Right-click an airport, navaid or route in the Enroute Charts View and select Show Approaches Within (see Using the Enroute Chart View to Apply Geographic Filters below). o Right-click an airport in the Airport List or RoutePack List and select Show Approaches Within.
JeppView User's Guide TIP When you apply a route corridor filter, JeppView takes a “snapshot” of the area around the route. If you modify the route, reapply the filter settings by right-clicking the route and selecting Show Approaches Within. All geographic filters apply a yellow border in the Enroute Charts View that depict the boundary of the filtered area, while the Airport List contains only airports within the selected geographic area.
Working with the Airport List 2. In the Filter Setup dialog box, enter a distance in the Show Airports Within field, and then click OK. A yellow boundary on the enroute chart depicts filtered area, and the Airport List contains only airports within the rectangle, circle or corridor. Any other airport filters that you have defined in the Airports tab might effect the results in the Airport List.
Working with Terminal Charts The Airport List is your primary resource for viewing terminal charts within your coverage area. If you are not familiar with the Airport List, you may want to review the topics in Working with the Airport List.
JeppView User's Guide • TIP Select an airport and use the LEFT ARROW key to display the associated terminal charts. You can use these procedures in the Airport List and the RoutePack List. The list expands to include all charts available for that airport. If terminal chart filters are applied (see Terminal Chart Filters), only some of the terminal charts might be listed.
Working with Terminal Charts Clearance, Radar Vectoring Area, Control Area (CTA), Terminal Control Area (TMA), Climb/Descend Areas, Approach Control Area Standard Instrument Departure (SID)> Noise — Noise Abatements, Preferred Runways and Flight Paths Approach — ILS, RNAV, VOR Runways Text — Special Notes European VFR Icons VFR Airport Airport — VFR Aerodrome Landing Chart Airspace — VFR Area Chart and Information, VFR Visual Reference Points Text — VFR General Aerodrome Information, VFR Text Day, V
JeppView User's Guide • 160 Changes that become effective mid-cycle on a specified date — Jeppesen charts use an effective date if a chart is issued before it can be used. In this situation, you should continue to use the previous chart until the effective date. When an airport is expanded in the Airport List to reveal its terminal charts, you will see the current chart and the future effective chart.
Working with Terminal Charts The revision date and the effective date are also printed in the terminal chart header. If there is no effective date, the chart is effective upon receipt. When you print a Trip Kit before a terminal chart is effective, both the current and the future effective charts are included. On the effective date at 0901 GMT, JeppView expires the old chart by marking it obsolete with a red dot, and displays the new chart as the current one.
JeppView User's Guide Obsolete Charts Terminal charts sometimes become effective between the standard chart cycle release dates. At 0901 GMT of the effective date, the expiring mid-cycle revision chart icon is marked with a red dot. The new chart icon is marked with a green dot. The old chart and the red dot disappear the next time you update your terminal charts.
Working with Terminal Charts Finding VFR Area Charts (Europe VFR Only) To locate an area chart, search the Airport List for the city in which an airport resides. Use the column searching to locate the area chart by entering "city=name". For example, to find the Berlin area chart, enter city=Berlin. Click Next as appropriate.
JeppView User's Guide Another method is to minimize the list of terminal charts by using the terminal chart detailed filtering criteria. For example, the following is a method to view airports that have only VFR Area Charts in their terminal chart selection: 1. Click Filter > Detailed Chart Filter Settings. 2. In the Default tab, clear the selections except Airspace. 3. Double-click Airspace or click the plus sign (+) next to Airspace. 4. Clear all airspace criteria except VFR Area Charts.
Working with Terminal Charts 5. Click OK. Unless additional airport filters are in place, all of the airports are still displayed in the Airport List. Those containing VFR Area Charts have a plus sign (+) next to them. 6. To minimize the Airport List to display only the airports that have a VFR Area Chart, click Filter > Airport Filter Settings. 7. In the Airports tab, select the Have visible terminal charts check box and click OK. Only those airports containing VFR Area Charts appear in the Airport List.
JeppView User's Guide To view another chart, do either of the following: • Click any terminal chart in the Airport List or RoutePack List. • Press the UP and DOWN arrow keys on the keyboard to move up or down the chart list. The RIGHT arrow key acts the same as clicking the + sign and expands the chart list for an airport. The LEFT arrow key collapses a chart list under an airport.
Working with Terminal Charts navigational features. The features remain visible on the chart in a lighter gray until you select another chart or uncheck this option. Decluttering does not affect the printed chart. Also, JeppView enables you to change the orientation of terminal charts by rotating them 90 degrees clockwise or counterclockwise. Scrolling To scroll the JeppView window in the Terminal Charts View, do either of the following: Mouse: 1.
JeppView User's Guide • Show Plan zooms in and centers on the graphical portion of the terminal chart. • Show Profile and Minimums zooms in and centers on the profile and minimums portion of the terminal chart. When a profile and minimums section is not available on the chart (VFR Bottlang charts), the Show Profile and Minimums option is not available. These commands work only for geo-referenced charts and are not available for airspace, arrival, departure, some airports, and noise charts.
Working with Terminal Charts Terminal Chart Filters By default, the Airport List displays every airport and terminal chart in your coverage area. You can manage the size of the Airport List by using filters to display a subset of airports and terminal charts. Terminal chart filters reduce the number of terminal charts that appear in the Airport List according to selected criteria.
JeppView User's Guide • Show Text Charts — Displays or hides special notes. • Show All Charts — Displays or hides all available terminal charts. • Show Deleted Charts — This selection behaves differently from the others. Select Show Deleted Chart with at least one other selection to view charts that have been deleted from the current revision along with the current charts. For example, when you select Show Approach Charts and Show Deleted Charts, the system displays deleted and current approach charts.
Working with Terminal Charts To open the Default tab: 1. Do one of the following: • Click Edit > Chart Type Filter. • Click Filter in the Airport List window and select Detailed Chart Filter Settings. • Click Filter in the RoutePack List window. 2. In the Detailed Chart Filter Settings dialog box, click the Default tab. To view more detailed filter criteria, click the plus sign (+) to expand the criteria for a terminal chart category.
JeppView User's Guide When detailed terminal chart filtering is in place, choose the quick terminal chart selections and display: • All types of terminal charts in the selected category (solid check mark). • Filtered terminal charts within that category (gray check mark). • None of the terminal charts in the category (no check mark). The Show All Chart Types option also allows you to toggle between the following three states: • Display all the charts in all the categories.
Working with Terminal Charts Use the Have Visible Terminal Charts filter on the Airports tab to hide all airports with no terminal charts that match the selected terminal chart filter criteria. Clearing Terminal Chart Filters in the Airport List If you no longer need your filter preferences, and would like to clear the filters and display all charts: 1. Click Filter in the Airport List window and select Detailed Chart Filter Settings. 2.
JeppView User's Guide The NOTAMS View provides access to the terminal chart NOTAMs for the airports and countries in your coverage area. NOTAMs are automatically updated with your terminal chart revisions. To open the NOTAMS View: 1. Click the NOTAMS tab. 2. Select an airport in the RoutePack List or the Airport List. • The chart NOTAMS for the selected airport, as well as the airport’s country, display in the view.
RoutePacks and Route Planning IMPORTANT JeppView is not designed as a route planner. The routing features in JeppView help collect Jeppesen terminal charts for a route. If you need extensive route planning features, please use FliteStar, JetPlanner, or contact a Customer Service Representative for information about additional options.
JeppView User's Guide • RoutePack Structure — Provides an overview of how a RoutePack displays airports, terminal charts, alternates, and other airports not associated to the route. • Creating a RoutePack — Guides you through creating a RoutePack using the RoutePack Wizard. This topic also provides methods to create just the RoutePack, and add a route later by either using the RoutePack Wizard or by using the point-and-click method.
RoutePacks and Route Planning See also: Loading and Unloading RoutePacks Updating RoutePacks Saving and Deleting RoutePacks Adding Alternates Adding Other Charts to a RoutePack RoutePack Wizard Creating a RoutePack is a method to help you gather airport charts and have them available for reuse and printing. If you use other RoutePack compatible programs (FliteDeck and FliteStar), the RoutePacks created in JeppView can be used in those programs as well.
JeppView User's Guide The RoutePack Wizard enables you to create a RoutePack by guiding you through a series of dialog boxes that creates routes with alternate airports and waypoints (if desired). NOTE The RoutePack Wizard opens when you first start JeppView unless you disable it. To re-enable it, select Show this Wizard at Startup after opening the RoutePack Wizard. To create a RoutePack using the RoutePack Wizard: 1.
RoutePacks and Route Planning 3. Although not required, you can enter the following in the Route field to help create your route: • Waypoint identifiers (such as airports, navaids, or intersections) along your route. • Enter LOW or HIGH to route along the low or high enroute airway system. • To specify an airway, enter the Victor or Jet airway number (V220, J151). When assigning Victor and Jet airways, you also need to assign an airway entry, exit or Enroute Airspace Fix on both sides of the airway.
JeppView User's Guide 8. Enter the RoutePack Name and Route Name fields, or use the default names. 9. To complete the RoutePack, click Finish. The new RoutePack and route display in the RoutePack List and graphically on the Enroute Charts View as a blue solid line. Opening and Closing the RoutePack List By default, the RoutePack List box appears on the left of the screen, but you can close, reopen, undock and move it.
RoutePacks and Route Planning Whenever you create a route, you must have a RoutePack in which to contain the route. You can create a RoutePack in any of three ways: • RoutePack Wizard • Drag-and-drop method • RoutePack Properties dialog box IMPORTANT JeppView is not designed as a route planner. The routing features in JeppView help collect Jeppesen terminal charts for a route.
JeppView User's Guide 3. The following information is optional in the Route: (Optional) field: • Waypoint identifiers (such as airports, navaids, or intersections) along your route. • Enter LOW or HIGH to route along the low or high enroute airway system. • To specify an airway, enter the Victor or Jet airway number (V220, J151). When assigning Victor and Jet airways, you also need to assign an airway entry, exit or Enroute Airspace Fix on both sides of the airway. For example, PNH V280 FRAIZ.
RoutePacks and Route Planning • When the system recognizes the airport identifier, it displays the airport name to the right of the field. • If multiple matches occur for what you type in, the TAB to select wpt prompt appears. Press the TAB key to open the Select an Item dialog box. • To add the airport to the Alternates list, click Add. You can add an unlimited number of alternates. Click Remove to delete the selected alternate from the list. 6. When you’re finished adding alternates, click Next. 7.
JeppView User's Guide 4. Click OK. 5. The Route Properties dialog box appears. Enter the route name or retain the default. 6. The new RoutePack appears in the RoutePack List. Add more airports to the new route by dragging them from the Airport List to the RoutePack List. • To insert a new departure airport, drag it to the first airport in the route. • To insert an enroute waypoint, drag it to the waypoint that will follow the inserted airport.
RoutePacks and Route Planning This method creates only a RoutePack, not the first route in a RoutePack. This procedure is useful for creating a RoutePack that contains only an Other Charts folder of frequently used charts (see Adding Other Charts to a RoutePack). To create a RoutePack using the RoutePack Properties dialog box: 1. Open the RoutePack Properties dialog box by doing any of the following: • Right-click an open space in the RoutePack List window and choose Add RoutePack.
JeppView User's Guide Routes are created and stored in a RoutePack. There are two ways to create a route, as described below or by using the RoutePack Wizard. A route must be contained in a RoutePack, which is collection of one or more routes, airports, and charts. Before creating a route, you must select or create a RoutePack to contain it. To create a route without the Route Wizard: 1. Do any of the following: • Right-click a RoutePack in the RoutePack List and choose Add Route (Point/Click).
RoutePacks and Route Planning When the Append Waypoints function is active, the pending route appears as a dashed line on the Enroute Charts View. Once you select the next waypoint, the new route appears in blue and each waypoint appears in the RoutePack List. Waypoints other than the departure and destination are not required. 5. To finish the route, right-click in the Enroute Charts View or the RoutePack List, and choose Stop Appending Waypoints.
JeppView User's Guide TIP • 015M indicates magnetic bearing. • 67.45 NM indicates distance. • 750/1000 ft indicates the approximate lowest and highest terrain between the last route waypoint and the mouse pointer. To change the distance units on the point and click display, click Tools > Options > Measurement and select a new unit from the Distance dropdown list. As waypoints are selected, the new route displays in blue on the enroute chart and each waypoint appears in the RoutePack List. 5.
RoutePacks and Route Planning • Right-click in the Enroute Charts View and choose Add Route to '[Selected RoutePack]'. This adds a route to the currently selected RoutePack in the RoutePack list. • Click File > Add Route to '[Selected RoutePack]'. This adds a route to the currently selected RoutePack in the RoutePack list. The Route Properties dialog box contains information about the route, including the distance, alternate airports, waypoints, and charts. The only active field is the route name. 2.
JeppView User's Guide The Route Wizard guides you through a series of dialog boxes to create a route with alternate airports and waypoints (if desired). To create a route using the Route Wizard: 1. Open the Route Wizard by doing either of the following: • Right-click the RoutePack name for the new route and choose Add Route (Wizard). • Select the RoutePack for the new route or any route or waypoint in that RoutePack, and then click File > Add Route to RoutePack. 2.
RoutePacks and Route Planning • RoutePack List • Search dialog box Using the Rubberband Method on the Enroute Chart To insert a waypoint using the rubber-band method on the enroute chart: 1. Point to the route line on the enroute chart. 2. Press the mouse button and, while holding it, drag the route line onto the desired waypoint. You do not have to drag the route to an existing waypoint.
JeppView User's Guide Dragging and Dropping Airports To drag an airport from the Airport List to a route: 1. Point to the airport in the Airport List, and then press and hold the mouse button. 2. Drag the airport to the RoutePack List and drop it onto the waypoint that will follow the inserted airport. The new airport appears in the RoutePack List along with its associated terminal charts, and the system redraws the enroute chart to reflect the change.
RoutePacks and Route Planning • Click Chart > Search. • Click the Search button on the Chart toolbar. • Right-click a waypoint in the RoutePack and choose Find/Insert Waypoint. 3. Click the appropriate tab (All Types, Airports, Low-Use Airports, VORs, NDBs, Airspace Fixes, or User-Defined Waypoints) for the new waypoint. 4. In the Name field, type the full or partial name, identifier, or city for the waypoint that you want to search for. • Use question marks (?) to include a wildcard in your entry.
JeppView User's Guide Appending Waypoints to a Route The Append Waypoints function adds new waypoints to the end of a route. You can append waypoints by using the enroute chart or the Search dialog box. Appending Waypoints on the Enroute Chart To append waypoints on the enroute chart: 1. Activate the Append Waypoints function in the enroute chart by doing either of the following: • Right-click the route in the RoutePack List and choose Append Waypoints.
RoutePacks and Route Planning • Press the DELETE key. NOTE Deleting an airport from the RoutePack List also removes all terminal charts associated with that airport. Replanning a Route As an alternative to modifying a route by inserting or appending waypoints, you can replan an existing route using the Re-Plan Route Wizard, which opens the Route Wizard with the Departure, Destination, and other current route selections are already entered.
JeppView User's Guide Reversing a Route JeppView enables you to quickly reverse an existing route in the Routepack. When you plan a return trip, you can easily copy an existing trip, paste it into the RoutePack, and then reverse it. To reverse a route, do either of the following: • Right-click the route to be reversed in the RoutePack List and choose Reverse Route. • Select the route to be reversed in the RoutePack List and click Tools > Reverse Route [RoutePack: route].
RoutePacks and Route Planning • Re-Plan Wizard (see Replanning a Route). To add an alternate to an existing route using the RoutePack List: 1. Right-click the route waypoint where the alternate begins, and then choose Add Alternate Route. The selected waypoint becomes the departure airport for the alternate route. 2. In the Route Properties dialog box, type a name for the alternate route (or use the default name), and then click OK.
JeppView User's Guide Filtering Terminal Charts in the RoutePack A terminal chart filter enables you to select particular types of terminal charts to be included in your RoutePack or route, including your departure or destination airport. This feature eliminates unwanted charts in the RoutePack or your print job. You can filter terminal charts for a RoutePack, route, or airport in the RoutePack List.
RoutePacks and Route Planning • Click Filter in the Airport List window and select Detailed Chart Filter Settings. The Departure, Destination, and Alternates tabs contain the same selection of chart types, but they apply to a different part of your route. The Default tab applies to the Airport List and can be applied to any enroute airports you have in your RoutePack. 2. Select (or clear) the desired charts on the Departure, Destination, and Alternates tabs.
JeppView User's Guide Although terminal chart preferences have been set for future RoutePacks, they have not yet been applied to the current RoutePack List. To apply these preferences to the current RoutePack, see Applying Chart Type Filters to Existing RoutePacks, Routes, and Airports. Applying Chart Type Filters to Existing RoutePacks, Routes, and Airports To apply terminal chart preferences to previously created RoutePacks and routes, and to view charts for RoutePacks created in JetPlanner: 1.
RoutePacks and Route Planning Resetting To the Default Filter Settings After filtering terminal charts in the RoutePack List, you might want to return to the default setting for terminal chart types. You can reset chart types for departure, destination, or alternate airports, as well as those for other enroute airports in a route. To reset the filters: 1. Do one of the following: • Click Edit > Chart Type Filter. • Click Filter in the RoutePack List window.
JeppView User's Guide destination, or alternate airports, as well as those for other enroute airports in a route. 1. Do one of the following: • Click Edit > Chart Type Filter. • Click Filter in the RoutePack List window. • Click Filter in the Airport List window and select Detailed Chart Filter Settings. 2. In the Default tab, select the desired types of charts and click OK. 3. Choose one of the following actions: • Right-click the selected airport(s) and choose Reset to Current Airport List Filters.
RoutePacks and Route Planning or airport, which will be discussed later. To delete a terminal chart from the RoutePack: 1. Expand the RoutePack and the airport to display the terminal charts. 2. Select a single terminal chart or select many terminal charts for the same airport by pressing the CTRL or SHIFT key as you select them (see Multiple Select for additional information). 3. Do one of the following: • Right-click on a selected terminal chart and select Delete. • Press the DELETE key. 4.
JeppView User's Guide Add Other Charts to a RoutePack The Other Charts folder contains additional airports and associated terminal charts stored in the RoutePack for quick access. Whenever you select an airport in the Airport List, drag or paste non-enroute airports or terminal charts into the RoutePack, the Other Charts folder is automatically added to the RoutePack. Airports in the Other Charts folder display in alphabetical order by identifier.
RoutePacks and Route Planning 1. Point to the airport in the Airport List, and then press and hold the mouse button. 2. Drag the airport to the RoutePack name and release the mouse button. The new airport appears in the Other Charts folder along with its associated terminal charts. Right-Click Action Two right-click areas allow you to add an airport to the Other Charts folder of a route. • Right-click an airport in the Enroute Charts View and select Add [airport] to [RoutePack]: Other Charts.
JeppView User's Guide • Right-click the RoutePack and choose Save. • Select the RoutePack and click the Save button in the Standard toolbar. To save a RoutePack under a different name, do either of the following: • Select the RoutePack and click File > Save As. • Right-click the RoutePack and choose Save As. To save multiple RoutePacks at one time: 1. Right-click a blank area within the RoutePack List window. 2. Choose Save All Modified RoutePacks from the shortcut menu.
RoutePacks and Route Planning • Select the RoutePack file and press the DELETE key. • Right-click the RoutePack file and choose Delete. Loading and Unload RoutePacks The function of loading and unloading RoutePacks is similar to that of opening and closing files. A loaded RoutePack appears in the RoutePack List, while an unloaded RoutePack is saved but is not currently displayed. RoutePacks that were loaded the last time JeppView was closed (and saved prior to exit) load automatically on startup.
JeppView User's Guide Updating a RoutePack When you update JeppView, RoutePacks that were created and saved in a previous cycle need to be refreshed to obtain the latest chart information. When charts are available that are newer than those loaded in the RoutePack, a message appears upon opening that RoutePack. JeppView automatically updates the terminal charts when opened. After the RoutePack is updated, the RoutePack name displays as Modified until you save it.
RoutePacks and Route Planning • Select the RoutePack in the RoutePack List and choose Chart > Properties. If you want to display the distance measurement in a different unit, click Tools > Options > Measurements. Route Properties The Route Properties dialog box provides basic route information as well as fields to name and rename the route, display and hide the route, and lock the route so it cannot be rubber-banded by mistake.
Printing Print Overview Because JeppView's main purpose is to print charts, there are a lot of ways to print. The Fast Way to Print what you are Viewing You can print the content in the main view window simply by clicking the Print button, by clicking File > Print or CTRL+P. This is a fast way to print one chart, but doesn't give you a lot of options on how to print it. • An enroute chart printed with this method may not be optimally scaled.
JeppView User's Guide • • When printing an Airport from the Airport list, make sure you have applied the appropriate filters so you print only the charts you want. o Airport List Filters o Airport List Chart Types Tab When printing a RoutePack, or an airport in a RoutePack, make sure you have included only the types of charts needed in the RoutePack. o Filters in the RoutePack List Next, click a Print command from one of several places within JeppView.
Printing Manual subscription. Terminal Procedures are available in the Print dialog box if you are printing either a RoutePack or an airport. See: Printing Terminal Charts Page Settings You can select whether to print two charts per page, choose appropriate print layouts for pre-punched Jeppesen paper, or print a booklet of charts. You can also choose to print on both sides of the paper, if your printer has this capability.
JeppView User's Guide • o Change the graphics mode to Use Raster Graphics. o Change the True Type font option to Print True Type as Graphics. o Adjust the printer memory tracking to Aggressive. o In HP printers, disable Print Optimizations in the Advanced tab of the printer Properties. Older printers may not work well for JeppView due to the complex nature of the graphics and limitations of the printer hardware and/or drivers.
Printing Print Toolbar Button Click the Print button to print the view currently shown in the main window. The Print button on the Standard toolbar is also accompanied by an arrow. Click the arrow beside the Print button to display a print menu based on the main window display and selections made in the RoutePack List and Airport List. NOTE The Standard toolbar Print button is not available while in the Text View (see Printing Text).
JeppView User's Guide 1. Open the Printing [RoutePack/Route] dialog box by doing any of the following: • Right-click a RoutePack or route in the RoutePack List and choose Print. • Select a RoutePack or route in the RoutePack List and click File > Print [RoutePack]. • Select a RoutePack or route in the RoutePack List and click File > Print > Print [RoutePack] in RoutePack List or File > Print [Route] in RoutePack List.
Printing due to decluttering considerations, but the program does take into account the chart preferences. • Departure and Destination prints the departure and destination at a 1:250,000 scale. If selected, these charts print first in the Trip Kit. • Entire Route prints an overview enroute chart page displaying the route. When Strip Charts is also selected, the overview page contains numbered boxes representing each of the strip chart pages to be printed.
JeppView User's Guide • Update Letter includes a list of all terminal charts that have changed since the last time the RoutePack was printed and saved. Update letters are available only when printing a RoutePack and become available after the RoutePack has been printed and saved. The Only Changed Charts (updated) option prints only the terminal charts listed in the Update Letter. After these charts are printed, they no longer appear on the update letter.
Printing • NOTAMS prints terminal chart NOTAMS (the NOTAMS tab content) associated with the selected RoutePack or route. • Airport Information prints airport information (General, Runway, Communication, or Notebook) for airports in the selected RoutePack or route. • JeppView Charts for [RoutePack] prints all the terminal charts for airports in the selected RoutePack or route. This does not include charts that have been filtered out or deleted in the RoutePack list. 4. Select the Page Settings options.
JeppView User's Guide TIP To use the Jeppesen Paper or Booklet options for the charts in a RoutePack, print the charts separately. First select only the terminal charts and the desired options. Then select everything except the terminal charts and use the other options. • Print on both sides is available only if your printer supports duplex printing. JeppView automatically detects duplex printing capability and sets your printer accordingly. 5. Select Print or Print Preview.
Printing Examples Revision Letter Use. You decide to print out your entire subscription and put the charts in your Jeppesen binders. After the next JeppView update, you can select all airports in your subscription and print out the charts in the Revision Letter, replace those charts in your binders and your printed charts will be updated. Update Letter Use. You only print out the charts in a RoutePack and keep these charts on your kneeboard.
JeppView User's Guide Printing a Subscription Revision Letter To print a Revision Letter that applies to your entire subscription: 1. Clear all airport and terminal chart filters in the Airport List. View the filter status text at the bottom of the Airport List window to ensure that all filters have been cleared (see Airport Filters). 2. Click anywhere in the Airport List and press CTRL+A to select all of the airports in your coverage area. 3. Right-click and choose Print. 4.
Printing Jeppesen Paper for Printing Terminal Charts Jeppesen sells two special paper styles for JeppView binders. Both styles are 8.5” x 11,” with a micro-perforation down the middle. Jeppesen # AJV33003 - 2 up printing This paper has 7-hole punches down the center and edge for Jeppesen Paper (2 up) printing option. JeppView prints two charts, both right-side up on the same page, maximizing each chart on its half of the page.
JeppView User's Guide • Click File > Print > Print Terminal Chart or File > Print Preview Terminal Chart while the terminal chart is displayed. o Click Print to print from the Print Preview window. o Click Close to exit the Print Preview window without printing. Printing Multiple Terminal Charts To print multiple terminal charts: 1. Select the terminal charts for the same airport by pressing the CTRL or SHIFT key as you select them in the Airport List or RoutePack List. See Selecting Multiple Charts.
Printing • TIP o Jeppesen Paper (2 up) prints to Jeppesen 8.5-by-11-inch paper with 7-hole punches down the center and edge (Jeppesen part # AJV33003) for placement in Jeppesen binders. o Jeppesen Paper (1 up) prints to Jeppesen 8.5-by-11-inch paper with 7-hole punches down the left and right edges showing one chart upside down (Jeppesen part # AJV33002) for placement in Jeppesen binders.
JeppView User's Guide • The Only Changed Charts (revised) option prints the charts listed in the Revision Letter. • The NOTAMS option prints terminal NOTAMs for the airport(s - the NOTAMS tab content). • The Airport Information option prints the selected airport information types (General, Runway, Communication, or Notebook) for the airports. • The JeppView Charts for [airport(s)] prints all terminal charts selected for the airports. 4.
Printing 4. This action selects all the airports in that state. 5. Right-click the selection in the Airport List and choose Print. For more information on Airport List sorting, see Airport List Overview. For more about filtering, see Airport Filters. Filtering and Sorting Charts for Printing The Airport List is a powerful tool when airport filters, terminal chart filters, and column sorting are used in combination.
JeppView User's Guide JeppView expands the area printed beyond what is displayed on the screen to fill the entire printed page. Printing a Topic from the Airway Manual To print a topic from the IFR or the VFR Airway Manual: 1. Select the topic you wish to print from the table of contents in the Text View. 2. Click the Print icon in the Text Viewer toolbar. 3. The Print dialog box appears. Select your preferences and click Print. You can only print one topic at one time.
Printing • Select the NOTAMS check box in the Printing [airport] dialog box (see Printing Airport Charts and Information). Printing the Notebook To print the Notebook View: 1. Click the Notebook tab to open the Notebook View. 2. Access the Print dialog box by doing any of the following: • Click the Print toolbar button drop-down and select Print Notebook. • Click File > Print > Print Notebook. • Click File > Print Preview Notebook and then Print.
JeppView User's Guide The Microsoft 2000 fax driver is preinstalled. To print to the fax driver using Microsoft 2000: 1. Launch JeppView. 2. Click File > Print > Print [enroute or terminal] Chart. 3. In the Name field, select your Fax and then click OK. 4. In the Send Fax Wizard dialog box, click Next. 5. In the Recipient/Dialog Information dialog box, type your name and fax number, and then click Add. 6. Click Next. 7. Type the appropriate information in the Cover Page dialog box and then click Next. 8.
Printing 5. Type in your name and fax number. Click Add. 6. Click Next. 7. The Cover Page dialog box opens. Click Next. 8. Click Next in the Scheduling Transmission dialog box. 9. Click Finish.
Text Pages Viewing the Text Pages JeppView includes all the text information from the front of the Jeppesen Airway Manual and in the VFR Airfield Manual. NOTE You receive the Jeppesen Airway Manual if you have an IFR terminal chart subscription. A European VFR chart subscription gives you the VFR Airfield Manual. An IFR and a VFR chart subscription gives you both manuals.
JeppView User's Guide • Use the scroll bars or the ARROW keys to move up and down in the topic window. • Use the Text Viewer toolbar to increase the font size, print the topic and move through the documents. The Jeppesen Airway Manual is only available in English. Viewing the VFR (Bottlang) Airfield Manual If you have a European VFR subscription, you receive access to the VFR Airfield Manual. The VFR Airfield Manual is organized by general information, and then by countries.
Text Pages 4. Select the Match whole word only check box if you want to search for the whole word and not partial words. Searching for "end" with whole words only locates topics with "end" in them. The search engine does not search for "end" in other words such as "descend", "intended", "endless", "endorsed", and so on. NOTE The system ignores common words like "and", "to", "the", "or", "I", and "a" if Match whole words only is selected. This does not keep them from being highlighted on the page.
JeppView User's Guide Decrease font size — Decreases the topic font size. Toggle left pane — Removes or adds the split bar between the table of contents and the displayed topic. Removing the spit bar allows more viewing area of the topic while displaying the split bar allows the table of contents to appear with the topic. The splitter bar's location is saved between JeppView sessions. Add bookmark — Create a list of favorite topics by clicking the Add bookmark button when viewing the desired topic.
Text Pages When you view the France book and change the language mode to French, you see only the topics in French. When viewing the France book and changing the language mode to German, there are no topics to display. Working with the Images Most images within the Jeppesen Airway Manual and the VFR Airfield Manual can be rotated, reduced and expanded for better viewing by using the small toolbar above the image.
JeppView User's Guide for any text that surrounds the image. If you make any display changes to an image, they automatically reset when you view another topic or close JeppView. Rotates the image 90 degrees counter-clockwise. Resets the rotation aspect to the default display. It does not reset the size of the image. Rotates the image 90 degrees clockwise. Zooms out or reduces the size of the image. Resets the image size to the default display. It does not reset the rotation aspect.
Text Pages The system creates a new folder below the selected bookmark. At this time, you can rename and move your folder. Moving Bookmarks You can move any of your bookmarks to different areas within the Bookmarks tab. To move a bookmark: 1. Click an existing bookmark to select it. 2. While holding the mouse button, move the bookmark to the desired location. Release the bookmark on another existing bookmark to place it in a separate level or folder. You can create multiple levels of bookmarks.
JeppView User's Guide To remove a bookmark that you no longer need, click an existing bookmark and perform one of the following actions: • Right-click the bookmark and choose Remove Item. • Press the DELETE key. • Click the Remove bookmark button. Printing a Text Topic To print a topic while in the Text tab: 1. View the topic you wish to print from the table of contents. NOTE Currently, it is not possible to selectively print parts of the text pages. You can print only one topic at a time.
Tools JeppView Tools This chapter focuses on JeppView tools that have not been specifically covered in other sections: • Conversions • Options • Status Bar ToolTips ToolTips are popup information boxes for particular objects in the Airport List, RoutePack List and dialog box fields. To display a ToolTip, point to an object for at least one second. For example, to view information about an airport, point to an airport in the Airport List. To turn off ToolTips: 1. Click Tools > Options. 2.
JeppView User's Guide From the dropdown lists, select the measurement unit you want to convert from and the measurement unit you want to convert to, then enter the value to convert from. JeppView displays the conversion in the area to the left of the convert-to measurement unit. Options The Options dialog box enables you to customize several JeppView settings.
Tools The Display tab affects how enroute charts appear in JeppView. • Lat/Lon Display — Controls how latitudes and longitudes are displayed. Click the type of display and enter the desired accuracy (maximum three decimal places). • Ruler Background Color — Determines the background color of the electronic ruler (see Electronic Ruler). • Hide Routes that are "Collapsed" in the RoutePack List — Hides routes in the enroute chart when the route tree is collapsed in the RoutePack List.
JeppView User's Guide at a slight angle relative to the leg. • Mouse wheel zoom — Sets your mouse wheel to zoom in and out rather than to scroll up and down. Printing Tab The Printing tab options affect how charts are printed from JeppView. • 244 Compass Rose — Prints a Jeppesen compass rose in the top right corner of the enroute chart, indicating North.
Tools • Lat/Lon Grid — Displays latitude and longitude lines on the printed enroute charts. • Use Black Headers in Printout — Prints the headers on each printed page with white text on a black background. NOTE When this option is cleared, the headers print as black text on a white background. This is useful to save toner and keep thin papers from crinkling. • Use "Compatible Mode" Printing — This is a backup option if JeppView printing does not work properly with your printer.
JeppView User's Guide You can set the distance measurements used in JeppView to show values in the unit type that you prefer. The following is a list of JeppView features affected by the Distance, Speed, Weight, Fuel, Temperature, and Pressure drop-down menus: • Distance: Electronic Ruler, RoutePack Properties, Route Properties, Route Leg Information on Chart, Minimum Runway Length Filter, Obstacle Filters, and Point and Click Routing. • Speed: Not applicable in JeppView.
Tools To hide or display the status bar, click View > Status Bar. The Status Bar displays at the bottom of the JeppView screen and displays the following elements: • current time • latitude/longitude • altitude at the cursor position, • distance represented across the width of the Enroute Charts View. NOTE In some chart projections, the screen width value may change as you move the cursor north and south, as a function of the projection’s distortion of the earth’s surface.
Quick Reference Guide Keyboard Commands in the RoutePack List Keyboard commands are shortcuts that enable you to quickly access features using your keyboard. Each keyboard command can be duplicated by a touch-screen or mouse command. The keyboard commands listed here apply only to the RoutePack List.
JeppView User's Guide Show or hide the Airport List CTRL+SHIFT+L Scroll through the Airport List PAGE UP, PAGE DOWN, UP arrow, DOWN arrow, HOME, and END keys Go to the beginning or end of the list CTRL+HOME or CTRL+END Expand the list of terminal charts under an airport Highlight the airport name and press the RIGHT arrow key. Hide the list of terminal charts Press the LEFT arrow key twice (once to highlight the airport name and once to collapse the charts).
Quick Reference Guide 2008 Electronic Charts Cycle Issue Date 01-2008 2008-JAN-11 02-2008 2008-JAN-25 03-2008 2008-FEB-08 04-2008 2008-FEB-22 05-2008 2008-MAR-07 06-2008 2008-MAR-21 07-2008 2008-APR-04 08-2008 2008-APR-18 09-2008 2008-MAY-02 10-2008 2008-MAY-16 11-2008 2008-MAY-30 12-2008 2008-JUN-13 13-2008 2008-JUN-27 14-2008 2008-JUL-11 15-2008 2008-JUL-25 16-2008 2008-AUG-08 17-2008 2008-AUG-22 18-2008 2008-SEP-05 19-2008 2008-SEP-19 20-2008 2008-OCT-03 21-2008
JeppView User's Guide 2009 Electronic Charts 252 Cycle Issue Date 01-2009 2009-JAN-09 02-2009 2009-JAN-23 03-2009 2009-FEB-06 04-2009 2009-FEB-20 05-2009 2009-MAR-06 06-2009 2009-MAR-20 07-2009 2009-APR-03 08-2009 2009-APR-17 09-2009 2009-MAY-01 10-2009 2009-MAY-15 11-2009 2009-MAY-29 12-2009 2009-JUN-12 13-2009 2009-JUN-26 14-2009 2009-JUL-10 15-2009 2009-JUL-24 16-2009 2009-AUG-07 17-2009 2009-AUG-21 18-2009 2009-SEP-04 19-2009 2009-SEP-18 20-2009 2009-OCT-02 2
Quick Reference Guide 2010 Electronic Charts Cycle Issue Date 01-2010 2010-JAN-08 02-2010 2010-JAN-28 03-2010 2010-FEB-05 04-2010 2010-FEB-19 05-2010 2010-MAR-05 06-2010 2010-MAR-19 07-2010 2010-APR-02 08-2010 2010-APR-16 09-2010 2010-APR-30 10-2010 2010-MAY-14 11-2010 2010-MAY-28 12-2010 2010-JUN-11 13-2010 2010-JUN-24 14-2010 2010-JUL-09 15-2010 2010-JUL-23 16-2010 2010-AUG-06 17-2010 2010-AUG-20 18-2010 2010-SEP-03 19-2010 2010-SEP-17 20-2010 2010-OCT-01 21-2010
JeppView User's Guide After I update terminal charts, when may I use them? Electronically updating terminal charts follows the same rules as updating terminal charts with a paper subscription. When a CD is received in the mail or an update is downloaded from the Internet, the charts with that update are effective immediately upon receipt. There are a few exceptions where Jeppesen issues a chart mid-cycle, and an effective date is needed on the chart.
Troubleshooting and Getting Help This section outlines general troubleshooting techniques as well as common questions. You may also want to check the Readme file for latest information. • Installation • Updates • Functionality • Printing • Compatibility • Contacting Jeppesen Installation I received the JeppView program and Electronic Chart Data (ECD) Discs, but I am unable to find a regional code.
JeppView User's Guide 4. Click Validate; your coverage loads and associates itself with your serial number. See Checking and Adding Coverages for additional information. I added a new coverage to my subscription and downloaded the update from the Internet, but it failed to update correctly. Now I am unable to use my previous coverage. Try to run the setup again by clicking on the setup.
Troubleshooting and Getting Help Refer to your license agreement regarding the number of computers you can install JeppView on. A standard JeppView license allows installation of any combination of JeppView and FliteDeck on four computers. To install the program on a new computer, deactivate JeppView on one of the original computers. Jeppesen Technical Support can help you get set up as long as the use falls within the terms of the agreement. See Deactivating JeppView for additional information.
JeppView User's Guide Terminal chart changes fall into one of two categories: • Changes that are effective immediately upon receipt of a CD or an available download—Most chart changes fall into this category. When an airport is expanded in the Airport List to reveal its terminal charts, the dates seen in the Country column are revision dates, not to be confused with an "effective" date. The terminal charts seen below were downloaded from the Internet on January 25th.
Troubleshooting and Getting Help When a Trip Kit is printed before a terminal chart is effective, it prints the current and the future effective chart. On the date of effectivity at 0901 GMT, JeppView expires the old chart marking it obsolete with a red dot, and displays the new chart as the current one. The red dot disappears the next time you update your terminal charts.
JeppView User's Guide If this fails to correct the issue, delete the folder with that download and repeat the downloading process. If JeppView does not identify any downloads available, delete or rename the c:\jeppesen\common\terminal charts directory, and try to download the update again. I am unable to locate my Electronic Chart Data CDs.
Troubleshooting and Getting Help In the FliteDeck Setup Program, change the RoutePack directory in the Routes tab to point to the directory where you save RoutePacks. Why do I see localizers when they are turned off in the Preferences toolbar? In the Low Altitude Enroute theme, some localizers are related to formations, and display when Enroute Airspace Fixes are selected. If you do not want to display formations with Enroute Airspace Fixes: 1.
JeppView User's Guide How do I change the "Licensed to:" name when I print terminal charts? If you installed JeppView with a NavSuite CD set: 1. Uninstall and deactivate JeppView. 2. Reinstall and reactivate, and enter the name you want to show as "Licensed to:" in the Name box of the Pilot Information dialog, at the beginning of the program CD installation. If you installed JeppView from a JeppView/FliteDeck CD set, please contact Jeppesen Technical Support for help creating a new registry setting.
Troubleshooting and Getting Help The problem may be your printer driver. Locate the printer manufacturer’s Internet site and check to see if you have the latest driver. There may be more than one available. (Often the choices are PCL5, PCL6, and/or Postscript.) Usually, Postscript is the best option, but it varies among printers. I have a duplex printer, but can’t print both sides from JeppView. JeppView automatically sets your printer to duplex mode when you select Print on Both Sides.
JeppView User's Guide Can I use the same charts for JeppView and FlitePro? No. Can FliteStar read JeppView terminal charts? Yes. If you are interested in FliteStar features, ask a Jeppesen Customer Service Representative about the NavSuite or go the FliteStar product page at Jeppesen.com. I have a subscription to JeppView and one for my GPS. Can I use the same charts on both of them? Jeppesen offers JeppView MFD to support certain Avidyne and Garmin MFD units.
Troubleshooting and Getting Help Contacting Jeppesen Jeppesen GmbH Frankfurter Str. 233 63263 Neu-Isenburg Germany Jeppesen Sanderson, Inc. 55 Inverness Drive East Englewood, CO 80112-5498 USA You may need to provide your serial number and customer number when calling customer service or technical support. It may also be useful in the future to have your Site Key and Site Code available. All three items can be found by selecting Activation Information from the Help menu.
Index Sorting .................................... 129 ( (**) .......................................... 215 Airport List Filter ...........139, 144, 147 3 Airport List Overview ..................... 80 30-day ......................................... 49 Airport List Right-Click Menus ....... 142 7 Airport Properties ........................ 132 7-hole........................................ 223 Airport Right-Click Menu .............. 142 A Airport Search ............................
JeppView User's Guide Booklet ...................................... 215 Corridor Filter ............................. 147 Booklet printing .......................... 211 Coverage Areas............................. 65 Bookmarks .................... 84, 233, 238 Coverages .................................... 53 Bottlang Airfield Manual ..........84, 233 Adding ...................................... 53 C Create Folder .............................. 238 CD Updates ............................
Index toolbars .................................... 84 waypoint .......................... 100, 107 Departure Chart Preferences......... 196 Departures ................................. 156 Destination Chart Preferences ....... 196 Display Filters ............................. 122 Displays ............. 3, 98, 119, 124, 211 Enroute ............................... 3, 124 207, 208, 211, 215, 227, 229, 230, 241 center .............................. 107, 142 change ....................................
JeppView User's Guide F Help ............................................ 15 Favorite Airports .................. 136, 144 Hiding ........................................ 207 Favorite Views ............................ 125 RoutePack ............................... 207 Fax ..............................211, 229, 230 Toolbars .................................... 84 Filter Hiding Toolbars ............................. 84 Airports by Geography .............. 147 High Airways .........................
Index J Military ...................................... 144 Jeppesen .... 3, 13, 30, 49, 57, 65, 119, 211, 213, 223, 225, 264 Minimum Install ............................ 26 Contacting ............................... 264 Jeppesen Paper .............211, 215, 223 Jeppesen website .......................... 49 Jeppesen/JeppView3 ...................... 30 JeppView 2.x .................................. 3 JeppView 3.0 .................................. 3 JeppView CD ................................
JeppView User's Guide Opening Warning .......................... 57 Properties Displaying Chart Object Properties ........................................... 114 Other Charts Folder ..................... 202 P Enroute Charts View ................. 122 Paper ......................................... 223 Paper for printing charts .............. 211 Pasting ...................................... 101 Proxy Setup.................................. 55 Public Airports ............................ 144 Filter ..
Index RoutePack ............................... 186 Open ...................................... 107 River?i ....................................... 192 opening ..... 101, 108, 155, 175, 178, 207 Riverview ................................... 192 RNAV (GNSS) ............................. 165 RNAV (GPS) ............................... 165 Rotate ....................................... 163 Rotate 90 Degrees Clockwise ........ 163 Rotate 90 Degrees Counter Clockwise ..........................................
JeppView User's Guide Filter ....................................... 139 Standard Terminal Arrival Route ... 156 S Starting JeppView ................... 57, 65 Sales/Customer Service ............... 264 Status........................................ 139 Save ................................... 101, 204 Status Bar .................................. 246 RoutePack ........................ 101, 204 Strip Charts ................................ 215 Schedule ....................................
Index Selecting ................................... 90 Viewing .................................30, 228 ToolTips ................................79, 241 ReadMe file ................................ 30 Trademark ..................................... 5 Terminal Chart NOTAMS ............ 170 Transfer License ............................ 61 Views .......................................... 77 TripKit ....................................... 215 Vista, Microsoft .......................
JeppView User's Guide Z Zoom......................................... 100 276 Zooming .............................