Use and Care Manual

Installation
9) Use a Spirit Level Ruler to measure whether the hood is in a horizontal
level, and use two 0.16"*1.18" Screws to lock into the safety hole
position of the hood (not mandatory, according to user's wishes to
choose whether to lock).
10) Tear off the tape from the air outlet.
Tape
NOTE:
 Make sure you remove the tape on the damper and check if the
damper opens and closes freely, otherwise it make noises, and
the range hood will be shaking.
COMPONENTS:
Part 2: 0.16"*1.18" Screws X 2
0.16"*1.18"
Screws 2pcs
Spirit Level Ruler
12