Use and Care Manual

Table Of Contents

Before Using the Range Hood

COMPONENTS:

YOU WILL BE NEEDING THESE TOOLS FOR INSTALLATION

1.Protective Gloves

2.Spirit Level Ruler

3.Measuring Tape

4.Double Sided Tape or Tape

5.Cross-Head Screwdriver Set

6.Electric drill and 8mm drill

CAUTION: Before proceeding to the installation, check If items

are missing or damaged, contact the manufacturer.

Observe all governing codes and ordinances. Have a qualified

technician install the range hood. It is the installer’s

responsibility to comply with installation clearances specified

on the model/serial rating plate. The manufacturer declines

all responsibility for improper installation and does not accept

responsibility for appliance warranty in the event of damage

caused by incorrect installation.

Part 1 : Wall Plug X 9

Part 2 : 0.16"*1.18" Screws X 9

Part 3 : 0.16"*0.32" Screws X 6

Part 4 : Aluminum Exhaust Pipe X 1

Part 5 : Cable Ties X 2

Part 6 : Installation Manual X 1

Part 7 : 1:1 Installation Diagram X 1

Part 11 : Range Hood Body X 1

Part 12 : Lower Chimney X 1

Part 13 : Upper Chimney X 1

Part 9 : Upper Chimney Bracket X 1

Part 10 : Wall Bracket X 1

Part 8 : Lower Chimney Bracket X 1