Use and Care Manual

Installation

7) Put the range hood into the cabinet that have been drilled holes,

then fix the range hood on the cabinet by 8 pcs of 0.16*0.79 screws.

8) Insert the plug of LED light into the power protection box and close

the cover. Then install the front panel and drill 2 pieces of setscrews.

9) Install the grease filter.

NOTE:

⚫ The extensible pipe are optional accessory, not supplied.

⚫ Connect ductwork to hood and use metal foil duct tape to make

joints secure and air-tight.

⚫ Make sure the damper assembly (or round duct plate) enters the

ductwork and that the damper opens and closes freely.