Specification

9
4. When Ice Full symbol< >is on, the unit will stop, take out the ice cube inside, the unit will
start working again.
If press the button<ON/OFF>more than 5s,when the ice maker is working, the unit will start
harvest. Press button<ON/OFF>,the unit will turn off.
Timer setting.Unit on timer setting,When the unit is working,timer setting the unit off.
Timer setting,When the unit is off,timer the unit on.
Press the<TIMER>button,the display will show<1H>,and then press<+>and<->to set the
time.During the setting,the H is flash,after 5s,the H will keep on and unit will in your Timer
setting.
5. Water Drain: take off the Water draining cap the bottom of unit ,then drain the water inside.It is
better that exchange water every 24hours.and clean unit every3days.
Start the self-cleaning program: Plug on the unit,press “TIMER/CLEAN”button on control
panel for more than 5 seconds, to enter the self-Cleaning program need 20minutes.the symbol
rotate on display screens，time count down area dispaly 20M.
Cancel the self-cleaning program: It takes about 20 minutes to complete one self-cleaning
program. When the program is over, the system will be in off-state automatically. And also you
can press the “ON/OFF” button on control panel to cancel the self-cleaning program by force.
Automatic self-cleaning program
Automatic self-cleaning program