Installation Guide

HOUSE
LINE
POSTS
Hole punch
for rail on
opposite sides
END/GATE
POSTS
Hole punch
for rail on
one side only
GATE
FENCE SECTION
CORNER
POSTS
Hole punch
for rail on
adjacent sides
POOL
Material Estimator
How to Plan
1. Create a sketch of the area you wish to install your
fence.
2. Establish all gate(s) and/or transition locations.
3. Determine the number of six foot wide fence
sections. Keep in mind that if a section is less than
six feet, it will require you to trim the section.
4 Determine the number of posts. Note: all gates must
be installed using gate posts.