User's Manual

■ How To Transmit Audio/Video from Your VCR
1.
Connect VCR and transmitter using the provided “MINI DIN TO SCART
A/V CABLE” with green MINI DIN plug, plug SCART to VCR output
jack, MINI DIN to transmitter. Please follow the instruction figure below.
2.
Plug one end of the power adapter into the back of the transmitter and the
other end into
any 230-volt wall outlet (or 120-volt), Use only the adapter provided.
3.
If you VCR has only one set of A/V output jacks and you want to use it
with a nearby TV. Connect 75ohm RF coaxial cable from the modulator
signal OUT port on your VCR to the RF IN port on your TV. (Note: In
order to also view cable programs on that TV, connect your incoming cable
TV source to the IN port of the VCR.)
4.
Locate and orient the transmitter according to the section of this manual
titled
"
Orienting Units for Optimum Performance
"
for best performance of
transmitter.
Units for Optimum Performance for best performance of transmitter.
9
■
■■
■ How To Transmit MINI DIN from Your Satellite Receiver
You can transmit audio/video either directly from your satellite receiver, or by
connecting them to your VCR. To transmit directly from your satellite receiver,
follow the instructions below.
1. Connect satellite receiver and transmitter using the provided “MINI DIN
TO
SCART A/V CABLE” with green MINI DIN plug, plug SCART to any SCART jack
of satellite receiver, MINI DIN to transmitter. Please follow the instruction figure below.
2.
Plug one end of the power adapter into the back of the transmitter and the
other end into any 230-volt wall outlet (or 120-volt), Use only the adapter
provided.
3.
If your satellite receiver or laser disc player has only one set of A/V output
jacks, in this case, please connect 75
ohm
RF coaxial cable from satellite
receiver's modulator output port to TV RF input terminal.
4.
.Locate and orient the transmitter according to the section of this manual
titled "Orienting Units for Optimum Performance" for best performance of
transmitter.
10