User's Manual

If your VCR has only SCART socket for audio/video output, you can use a
SCART/RCA adapter (not included) to connect the RCA plug of the
transmitter and the SCART socket of VCR. Please follow the instruction figure
below.
1.
Plug one end of the power adapter into the back of the transmitter and the
other end into any AC wall outlet. Use only the adapter provided.
2.
If you VCR have only one set of A/V output jacks and you want to use it
with a nearby TV. Connect 75ohm RF coaxial cable (not included) from the
modulator signal OUT port on your VCR to the RF IN port on your TV.
(Note: In order to also view cable programs on that TV, connect your
incoming cable TV source to the IN port of the VCR.)
3.
Locate and orient the transmitter according to the section of this manual
titled
"
Orienting Units for Optimum Performance
"
for best performance of
transmitter.
9
Ƶ How To Transmit RCA from Your Satellite Receiver
You can transmit audio/video either directly from your satellite receiver, or by
connecting them to your VCR. To transmit directly from your satellite receiver,
follow the instructions below.
1. Connect satellite receiver and transmitter with RCA cable, just plug RCA
plugs to RCA sockets of satellite receiver.
If your satellite receiver has only SCART socket for audio/video output, you
can use a SCART/RCA adapter (not included) to connect the RCA plug of the
transmitter and the SCART socket of VCR. Please follow the instruction
figure below.
2. Plug one end of the power adapter into the back of the transmitter and the
other end into any AC wall outlet. Use only the adapter provided.
3. If your satellite receiver or laser disc player has only one set of A/V output
jacks, in this case, please connect 75ohm RF coaxial cable from satellite
receiver's modulator output port to TV RF input terminal.
..Locate and orient the transmitter according to the section of this manual titled
"Orienting Units for Optimum Performance" for best performance of
transmitter.
10
Ƶ How To Receive Wireless Audio/Video Signals on Your TV
There are two ways to receiver wireless audio/video signals on your remote
TV (TV in another location such as in bedroom, kitchen).