User's Manual

E. Orienting Units for Optimum Performance
This sender system should be placed on a flat, stable surface to prevent
damage to it from falling.
For optimum performance, the 2.4GHz antenna can be appropriate to adjust its
direction, and to get the maximum operating range, you can try to minimize the
number of obstacles (e.g. your TV or other electronics, large furniture) where
between the transmitter and receiver units.
13
F. Using the Remote Control Feature
This sender system not only allows you to send crisp audio/video
from one area to another, it also gives you the ability to control the
source using your existing remote control device. It converts the
infrared (IR) signal emitted by your remote control to a radio
frequency (RF) signal in the receiver and sends it back to the
transmitter where the RF signal is converted back to the original IR
signal and control the audio/video source such as DVD ,VCR , etc.
In order to obtain optimum performance of the remote control extender,
please operate as follow:
The first you need to plug the IR extender provided in the IR
extender port of the transmitter and put the IR eye close to IR
receiving window of A/V source, and then aim
the existing remote
control at the IR window of the receiver within 5 meter.
DVD/VCR/SAT
IR eye
14
G. Troubleshooting, Care and maintenance

Please read this owner's manual carefully and follow the steps described in it. If
you still have difficulties, consult the following table. It will guide you though
the most common problems and their solutions.